- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Your DB is corrupt. Download the newest version of the Philips Device Manager for your model # at www.usasupport.philips.com, and then click the "Update" function once it is installed. The update wil lresolve your issue.
You have to do the "update" in the Philips Device Manager (make sure you are connected to the internet when you do) to repair the corruption:
Mode for Philips' GoGear Open
the Philips Device Manager (Start à
All Programs à Philips Digital
Audio Player à SAXXX à Philips Device Manager) and
click on the “Repair” tab.Then click on
the “Repair” button to start the repair process.Most of the time, when your player is in that
state, the Device Manager will not recognize that your GoGear is plugged
in.If this is the case: Disconnect the
player from the PC, and make sure the mp3 player is turned off. Hold in the
volume + button on the mp3 player, and reconnect the player to your pc while
holding in the volume + button. Continue holding the volume + for 10-15 seconds
until a "Found New Hardware Wizard" pops up. It should recover your
device if there isn't anything internally wrong with the player. Warning: this
procedure will result in your songs being erased off the player, so they will
have to be reloaded.
GoGear Firmware Upgrade You
need to get the latest firmware upgrade from the Philips website: 1.
Go to www.philips.com/support 2.
Enter your country/language 3.
Enter your model # SA6045 or whatever 4.
Click on the link for your exact model # (the one w/o the "B" in it) 5.
Click on "Software & Drivers" 6.
Download the updated "Device/Firmware Manager" 7.
Once installed, open the Philips Device Manager 8.
Click on the "Update" tab, then the "Update" button (with
your mp3 player connected to the computer, of course) 9.
Your Mp3 players firmware will update automatically If
you do not have the latest version of the Philips Device Manager installed (the
latest is the version from the Philips website), then clicking the
"Update" button will give you a false positive saying "The
firmware on your device is already up to date." -Tha
Not garbage - you need the latest firmware upgrade from Philips. Open the Device Manager that came with the install CD, or go to www.usasupport.philips.com to get it, and click on "Update" instead of "Repair." It should lead you through the firmware upgrade process - make sure you are connected to the internet first.
Did you get a pop-up that said the repair was successfully completed? If not, then try the following repair instructions: 1) Open up Philips Device Manager (Start --> All Programs --> Philips) - if you don't see it, then re-run the installation CD or grab the "Device/Firmware Manager" from the Philips website 2) Click on the Repair Tab, and look for a msg that says connect the player while holding the volume + button 3) Disconnect the GoGear from the computer and turn the GoGear off (if you haven't done so already) - hold in the volume + button and continue to hold it as you reconnect the GoGear to the computer; after holding the volume + button for up to 20 or 30 seconds, a window will open up saying that your device is being repaired (now you can let go of the volume + button); after the repair is successfully complete, your GoGear will be good as new.
After this, you may be able to go back into Device Manager and click the Update tab to get the firmware upgrade which solves the memory corruption problem.