Question about Kenmore Kitchen Ranges

1 Answer

Neither oven or broiler will turn on - Kenmore Kitchen Ranges

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,416 Answers

Hello,

what this indicate from your statement could be view from two ways ,that is the problem can check and solve from two way .

1 from the fuse or,
2.from the wire connections

what you are to do to solve this problem first of all put off all form of power supply connected to the range ,then carefully unscrew the screw use as key on the range with technician tools either screw driver or allenkey depending on the nature of screw use on the range then trace the wire down to the fuse at the back of the range
Locate the fuse. It should be near where the electrical cord comes into the range. The fuse is a small white bar with metal caps on either end. Carefully remove the fuse. Avoid touching the transformer or other parts inside the range.

Purchase a new fuse. Most range ovens use an 18 amp ceramic fuse. Consult your owner's manual to find out what kind of fuse is used, or take the old fuse into the store to find the exact match.
Replace the fuse. Put the cover back on and see if your range works. If it does, replace the screws. If it does not, try a different fuse. If the microwave still does not turn on, you may have to have it replaced of professionally repaired.

but for the wire connection carefully trace the wire down to the element it is silver in colour see if there is any form of loose wire connected to the element carefully replace the wire on the element then couple it back to is position with this the problem of the range will be solve .

thank you.

Posted on Aug 19, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Model ew30gs65gsc. Why is broiler not igniting?


Electrolux Oven Broiler Not Working - Model E30DF74EPS ...

www.repairclinic.com/...Range-Stove-Oven/...-/Electrolux-Oven-broiler-...
Most Frequent Causes for Oven broiler not working. See All Range/Stove/Oven Parts for model E30DF74EPS. Cause 1 Temperature Control Thermostat.

Electrolux Oven Broiler Not Working - Model EW27EW65GS6

www.repairclinic.com/...Range-Stove-Oven/...-/Electrolux-Oven-broiler-...
Electrolux oven broiler not working? Use our DIY troubleshooting & videos. Then, get the parts you need fast. Return any part for 365 days.

Oven Broiler Not Working - Repair Parts - RepairClinic.com

www.repairclinic.com/...Range-Stove-Oven/...---/Oven-broiler-not-worki...
Oven broiler not working? Use our DIY troubleshooting & videos. Then, get the partsyou need fast. Return any part for 365 days.

Gas Oven/Broiler not working/igniting - ApplianceBlog


Jan 13, 2016 | Electrolux Kitchen Ranges

1 Answer

Broiler element doesn't work


Reseating the Element The broiler is heated using an electric element which should be clipped in to the top of the broiler enclosure. If this has come loose then it might not be making contact with the necessary terminals. Try to reseat the terminal but before doing so you must ensure that the electricity is turned off.
Testing the Element The element is what heats up and cooks the food in the broiler. Over time the heat can damage the broiler element. These elements are supported by stand-offs and if the element burns out or becomes damaged then this can be a common reason why the broiler isn't working.
The easiest way to test whether this is working is to turn the broiler on and look at the element. If it is working correctly then the element should be glowing red.
Another slightly more complicated test for the broiler element is to remove the element from the oven and disconnect it. Then use a multimeter to check the continuity of the element. Set the multi-meter to measure resistance and then put it either side of the element. The normal measurement should be between 20 and 40 ohms. If the element is infinitely resistant then this means it's broken and will need to be replaced.
Testing Oven Controls Another reason why the broiler will fail to work is because of problems with the oven controls. A thermostat is used to set the temperature of the broiler, and the oven selector controls are used to control the setting of the broiler.
Turn the oven controls on to see whether the broiler is working properly. If not the controls can be removed and tested using a multimeter. Check the outputs to ensure that the controls are working correctly.
These can also be replaced if required by fitting a replacement part designed specifically for your oven.


Read More: Troubleshooting an Oven Broiler Doesn Work

Feb 09, 2014 | Thermador SEC302 Electric Double Oven

1 Answer

Broiler doesn't turn on completely


The top element should come on when Broiler is selected. If both ovens have a broiler mode, then look for something failed in the circuit for the broiler heating elements (it's unlikely both broiler elements would fail together.). If there is only 1 oven with a broiler, look for a failed broiler element.

Dec 17, 2009 | Viking 27" Professional Select Built-in...

1 Answer

When I turn my oven on bake the broiler element runs and eventuly the f2 codes comes on.


your oven uses fboth the broiler element and the oven element during baking. Since you know the broiler element works, you most likely will have to replace the oven element.

Oct 01, 2009 | Ovens

1 Answer

Broiler doesn't lite, no gas going to pilot


Most cases Broiler ignitor is out, after you turn on the Broiler, check the voltage on Broiler ignitor 2 wires, if you have approx. 110v, then change the ignitor, but you don't have 110v, then check Broiler safety valve and oven thermostat, but 90% of the time is the Broiler ignitor. Have fun.

Jun 29, 2009 | Dynasty DGRSC 48-6G Gas Kitchen Range

2 Answers

Broiler won't turn off. Error code F-3


The broiler won't turn off even when you press the "Off/cancel" button? It sounds like the broiler control relay is stuck shut. The F3 code means the oven temperature sensor has failed, this probably happened because the oven got too hot when the broiler was stuck on. There is fail-safe thermal fuse that will blow if the oven gets too hot, so the oven won't melt down but you should leave the unit off so you don't blow the fuse.

To fix the relay, you will have to replace the oven control module. I think this is about $200 and not too hard to replace if you are somewhat handy. The temperature sensor is also serviceable, you can find parts at Appliance Parts Pros on the web. Hopefully you haven't thrown the range out yet, let me know if you need further assistance.

Nov 27, 2008 | Whirlpool RBS305PD Electric Single Oven

1 Answer

Oven will not shut off broiler element stays on


The control knob more than likely operates a relay that has gotten stuck in the energized position. If this isn't the case then the Temp sensor or thermostat probably shorted internally. Unplug the unit before attempting any work.

Nov 16, 2008 | Whirlpool Gold White-on-White 21.9 cu. ft....

1 Answer

Broiler won't turn off. Error code F-3


hi there,

can you provide the model # off your stove please?

Sep 15, 2008 | Frigidaire 30" Self-Cleaning Freestanding...

1 Answer

Broiler Still Not Working


does the board control both ignitors and if so your right the ignition board is bad.

Aug 27, 2007 | GE Profile Spectra JGBP90 Gas Kitchen...

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Cindy Wells

Level 3 Expert

5096 Answers

Mike Carew

Level 3 Expert

969 Answers

Are you a Kenmore Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...