Question about Mercury KVM266PM-U (KVM266PMUD1600) Motherboard

1 Answer

Power is not coming on motherbord - Mercury KVM266PM-U (KVM266PMUD1600) Motherboard

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 85 Answers

There may be a problem in mother board or the smps which supplies power to motherboard

Posted on Aug 19, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have install a new mother board, but when i power the computer the power come on, but no response on the monitor


Or reset motherbord settings to defaults you can reset with 2 methods.
(1)Pull cmos cell from motherbord for 10 minutes so all settings defaults.
(2) Find jumper on motherbord named "Clear cmos" It has 1-2-3 pins.Put jumper in 2-3 position and thne power up then again put pin in 1-2 position thne all settings defualts.
Refix RAM memory.Clean dust from all parts.
Open processor and processor fan.
Remove pci cards from motherbord then check.
Make sure motherbord not ground with cabinet.
Let me know if you need further assistance.

Nov 15, 2009 | Asrock K7S41GX SiS741GX Mainboard...

2 Answers

Hi I have an acer desk top pc and when i turn it on it bleeps sometimes and no signal is getting to the monitor it just comes up with RGB no input signal. What could this be pelase


When you power up the computer press F8 key then enter in enable vga mode thne go to control panel and display property then change screen resolution to 1024*768 then check.But if you are not able to safe mode and other menu when you press F8 then follow below steps.1 by 1 and check.
First open cpu cabinet then pull cmos cell from motherbord for 10 minutes.
Refix RAM memory.
Reattch ATX power connector to motherbord.
Reattch power cable and SATA or ide cable to harddisk.
Clean dust from all parts of motherbord.
Open processor fan and processor.
Then reattach both.
Make sure motherbord is not ground with cabinet.
Remove pci cards from motherbord then check.
Let me know if you need further assistance.Thanks.

Nov 13, 2009 | Computers & Internet

1 Answer

My board will power up but i cant get any video dont know where to srt jumpers


FOr reset motherbord settings to defaults you can reset with 2 methods.
(1)Pull cmos cell from motherbord for 10 minutes so all settings defaults.
(2) Find jumper on motherbord named "Clear cmos" It has 1-2-3 pins.Put jumper in 2-3 position and thne power up then again put pin in 1-2 position thne all settings defualts.
Refix RAM memory.Clean dust from all parts.
Open processor and processor fan.
Remove pci cards from motherbord then check.
Make sure motherbord not ground with cabinet.
Let me know if you need further assistance.

Nov 10, 2009 | PC Chips P23G Motherboard

1 Answer

There is no response when I power on my machine. It powers up, but there aren't any beeps like normal and the monitor shows nothing. Also, the light next to the power button stays orange.


Open cpu cabinet.
Refix ram memory.
Pull cmos cell from motherbord 10 minutes then refix it.
Remove pci cards from motherbord if any .
Clean dust from all parts.
Open processor fan and processor refix both.
Make sure motherbord is not ground with cabinet.
Check motherbord in outside of cabinet.
Reconnect all connection to harddisk.
Let me know if you need more assistance.
Thanks.

Oct 31, 2009 | Computers & Internet

1 Answer

My computer will not boot. The power will come on and the cooling fans will just continue running.


Open cpu cabinet.
Refix ram memory.
Pull cmos cell from motherbord 10 minutes then refix it.
Remove pci cards from motherbord if any .
Clean dust from all parts.
Open processor fan and processor refix both.
Make sure motherbord is not ground with cabinet.
Check motherbord in outside of cabinet.
Reconnect all connection to harddisk.
Let me know if you need more assistance.
Thanks.

Oct 31, 2009 | Gateway GT5220 PC Desktop

1 Answer

When I turned on my computer this morning the screen did not come on. What could be the problem?


First open cpu cabinet.
Then Refix your RAM memory .
Reattach ATX power connector from SMPS to motherbord.
Remove pci cards from PCI slot.
Pull cmos cell from motherbord for 10 minutes so all motherbord settings are defaults.
Reattach both connection to harddisk.
Make sure your harddisk is detected in bios.
When you power up the computer press F1 or F2 or "del" key to enter in bios.
Then check harddisk is detected.
Let me know if you need more assistance.
Thanks.

Oct 07, 2009 | Acer Computers & Internet

1 Answer

On and off button will not work. Is this easy to


open cpu cabinet .
check on motherbord corner side cable pin from power on/off switch to motherbord corner pin jumper correctly.
check on motherbord you find power on/off PIN jumper you cna ground it with any metal like screw driver. then if power on then you have to check that cable or still not start then you have to reset factory defaults settings of motherbord.
For thta pull cmos cell from motherbord for 10 minutes .
Then check.

Aug 21, 2009 | Computers & Internet

1 Answer

New motherboard won't power up


First check your motherbord POWER pin it is in corner of motherbord.
Just short that 2 pin with screw driver .
Read on motherbord corner you can find pin for Power up.
also reconnect cable from psu to motherbord.

Aug 01, 2009 | Biostar P4M900-M7 Fe VIA P4M900 Socket 775...

3 Answers

Computer won't turn on


hi

check your power cable , eathing. smps check *********** bord dont touch the cabinet.i think u have motherbord grounding or your power suply of pc has pro.

Mar 20, 2008 | Computers & Internet

Not finding what you are looking for?
Mercury KVM266PM-U (KVM266PMUD1600) Motherboard Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Computers & Internet Experts

Abhinandan  Patil
Abhinandan Patil

Level 3 Expert

568 Answers

vsri9

Level 2 Expert

73 Answers

Computer Links

Level 3 Expert

2385 Answers

Are you a Mercury Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...