I have a netgear wg111v3 adaptor and a netgear wireless router. both setup fine and get on net ok. but when i turn my computer off then on again i have to re install my wireless adaptor. can u help?

No, it will not work.

You need to look at the guarantee, to see if you can get it replaced.

Hope this helps.
Ch.1 Basic Setup includes Installation and Connection.

You might not be getting a correct ip from your wireless router.

first, try to power down the computer and your netgear router for about a minute or two. turn the router on first. once the lights are stable on the router, boot up your computer. if your still not able to access the internet. try this

go to start > control panel > network and internet > network connections or network and sharing center > right click on wireless network connection and go to properties > highlight "internet protocol version 4 (TCP/IPv4)" > left click on properties, the wireless network connnection properties will then be opened.
make sure that the radio buttons are on "obtain an ip address automaticaly" & "obtain DNS server address automaticaly".

Hi,


You need to do some wireless setting on router,
Please follow steps to fix your issue

1.Please changed network (SSID)name of router
2.Reinstall adapter driver
If you follow above steps defenately your issue would be resolved

Hi,


You can download driver for windows-7 compatible
(download and install in computer)

http://kb.netgear.com/app/answers/detail/a_id/12962

If your issue not resolve please revert back to us for further

Thanks for using Fixya

Hi,
If your adapter is bend and it is not detected by computer
it might be faulty and if it is under warranty call 1888-NETGEAR(US) or check the contact no of Netgear for Replacement.
else you have to go for a new adapter
i wud prefer you if you want to go for New adapter that support WIN7

- WN111v2
- WG111v3

redo the driver first remove the program and restart the pc then start again this normaly helps in 90%of cases hope this helps you

you must logon to the NetGear wireless router and setup wireless security. choose a security type usually WEP, type a key phrase or passphrase and voila, you will have to re-connect on your clients by entering the password when you get prompted for it.

Do you have any other computers or game consoles hooked up the netgear router? if the other computers etc. can connect to the Net via your router, then it sounds like your Xbox adaptor might have failed.

Have you tried connecting the laptop in a different wireless network? Try changing the channel in your router and you may also upgrade the firmware of your router.