Question about Computers & Internet

1 Answer

Whenever i click on print button this problem displays

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 480 Answers

Hi, You can always uninstall and reinstall the drivers from your computer anytime a problem occurs. or you can restart the PRINT SPOOLER on services to clear any issues with your printer.. to go to print spooler

  • click on start
  • go to run
  • type .. services.msc
  • then look for print spooler
  • double click on it the click on the stop button
  • then click the start button to enable it again
  • then try to print again..
Cheers,

Posted on Aug 19, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Service R0631M on c5180 printer


For HP C5180 printers, if you observe an INK SYSTEM FAILURE message then the permanent PRINTHEAD may be electrically damaged (unfortunately it is not replaceable; you can verify this by performing the following):

To bypass INK SYSTEM FAILURE message please see the HP Printer Diagnostics Tests file (pdf) for instructions: http://inkjet411.com/?page_id=1813

Verify the permanent built-in PRINTHEADs electrical performance inside this legacy printer model by running the TAP 43 diagnostic test (either one of the procedures below applies to all printers which use HP02 or HP363 ink cartridges): For additional HP02 support information, please visit our HP02 system support page which includes videos of everything mentioned below: http://inkjet411.com/?page_id=1372

A.HP02 ink-series printers with KEYPAD (i.e. keypad numbers 1-9)
Tap 43 PRINTHEAD Health Diagnostics:
Video Procedure: http://inkjet411.com/?page_id=2391
    1.Press * and # keys simultaneously.
    2. "Enter Special Key Combo" will be displayed.
    3.Press 123 to display the 'Support/Service' menu.
    4.At 'Support/Service' menu, click the Right Arrow 3 times until Special Reports menu is displayed.
    5.Select Ok, then click Right Arrow 2 times until the 'print-mech button tap' menu is displayed.
    6.Select Ok ('code = 0' will be displayed); click and hold Right Arrow until 'code = 43' is displayed. Use the Left Arrow if you need to decrease numerical count.
    7.Select Ok. The test page prints.
    8.Check the 4th line at the top of the printed report; an electrically good/stable PRINTHEAD 'Pen Status' will state "Pen Status: Pen OK".........if any other message is displayed then the PRINTHEAD may have failed and may need to be replaced (if part is still available). It is suggested to perform the 'Printer Reset' procedure below to first rule out printer firmware related problem.
    B.HP02 ink-series printer models that DO NOT HAVE a KEYPAD:
    Internal Test Print:
    1. Press the Menu button, press the Right Arrow button to select 'Tools', and then press 'OK'.
    2. Press the Right Arrow button several times to select 'Print Test Page', and then press 'OK'. The test page prints.
    Tap 43 PRINTHEAD Health Diagnostics - See Video Procedure: http://inkjet411.com/?page_id=2377

    1. Turn ON the printer.
    2. Press and Hold the "Print Photos" & "Red Eye Removal" buttons.
    3. Release both buttons.
    4. You will see a new screen that says, "Enter Special Key Combo"... The Key combo is: press and release in sequence the "Red Eye Removal", "Print Photos", and then "Red Eye Removal"
    5. Scroll through the menu by pressing the right arrow button until the display says 'Special Reports'.
    6. Select Ok, then press the arrow button until the 'print-mech button tap' menu is displayed.
    7. Select Ok ('code = 0' will be displayed); click and hold Right Arrow until 'code = 43' is displayed.
    8. Select Ok. The test page prints.
    9. Check the 4th line at the top of the printed report; an electrically good/stable PRINTHEAD 'Pen Status' will state "Pen Status: Pen OK".........if any other message is displayed then the PRINTHEAD may have failed (unfortunately the PRINTHEAD is not replaceable). It is suggested to perform the 'Printer Reset' procedure below to first rule out printer firmware related problem.

    For additional and advanced HP printer diagnostics, please visit the Inkjet411 site: http://inkjet411.com/?page_id=1813

    To help solve other HP02 ink-series printer or printing related issues please visit http://www.inkjet411.com

Nov 27, 2013 | HP Photosmart C5180 All-In-One InkJet...

1 Answer

Need to align ink cartridges


Follow the steps to align newly installed cartridges.

  • When prompted, make sure plain white letter or A4 paper is loaded in the input tray.
  • Press the button next to OK on the control panel display.
  • The product prints an alignment page.
  • Place the alignment page print-side down on the right front corner of the glass.
  • Press the button next to OK on the control panel display.

When the On button stops flashing, the alignment is complete. Remove the page and recycle or discard it.

Method two: Print an alignment page using the computer

  • Double-click the HP Digital Imaging Monitor icon ( ) on the lower right side of the Windows taskbar.
  • The HP Solution Center displays.
  • In the HP Solution Center, click Settings . Then click Printer Toolbox .
  • The printer Toolbox displays.
  • Click the Device Services tab.
  • Click Align the Print Cartridges .
  • When prompted, make sure plain white letter or A4 paper is loaded in the input tray.
  • Press the button next to OK on the control panel display.
  • The product prints an alignment page.
  • Place the alignment page print-side down on the right front corner of the glass.
  • Press the button next to OK on the control panel display.

When the On button stops flashing, the alignment is complete. Remove the page and recycle or discard it.

****If you need any technical help on printer then you can reach at http://www.vtechsquad.com/

Feb 05, 2013 | HP PSC 1210 All-In-One InkJet Printer

1 Answer

I have a brother mfc 490cw. I have only printed from microsoft word. But whenever I print a page it runs another page reporting the file name, directory,template title, subject, author, keyword, comments...


Hi there!
The issue that you are having is because of the settings on your Microsoft Word. Here's what you can do to resolve the issue.
  1. Open the document you want to print on Microsoft Word. Click on the Orb icon on the upper left hand corner which is also called the Office button.
  2. Click on Print and click on Print again. The Print window should be open by now.
  3. On the lower left hand corner of the print window you will see the options button. Click on the Options button. You should now have the Word Options window.
  4. On the Word Options window. Click Display from the Left panel, you should see Printing Options.
  5. Make sure that under Printing Options only Print Drawings created in Word is Checked and leave the others unchecked. Click OK. Click OK again. This should print your document without the other page.
Hope this helps! Have a Good day!

Jun 18, 2011 | Office Equipment & Supplies

1 Answer

How do i change the zoom levels of my computer


If you are talking about a internet browser usually it's Ctrl + to zoom in or Ctrl - to zoom out

If you are talking about screen resolution than:

1. Open Display Settings by clicking the Start button Picture of the Start button, clicking Control Panel, clicking Appearance and Personalization, clicking Personalization, and then clicking Display Settings.

2. Under Resolution, move the slider to the resolution you want, and then click Apply.
FILE > PRINT PREVIEW Prior to printing, got to the print preview screen. There will be a window of the print there and as/if you chance any settings, the print preview window will show (exactly) what the printed page will look like.

FILE > PRINT OPTIONS There you can set the header and footer margins. If nessassary.

May 16, 2011 | Computers & Internet

1 Answer

Printer window displays in foreign language. need english. pages come out blank.


  1. From the main menu, use the left and right Arrow buttons to scroll to Setup.

  2. Press the Select button .

  3. Press the right Arrow button until the heading you want appears on the display, and then press the Select button .

  4. Use the left and right Arrow buttons to scroll through the available menu items.
  5. When the setting (language) you want appears on the display, press the Select button to save the setting or enter the submenu.


  6. For Blank printout:Ensure you installed the ink cartridges correctly and removed the sticker and tape from each cartridge.

Clean the cartridges:
To clean the ink cartridges from the operator panel:
  1. Load plain paper. .

  2. From the main menu, use the left and right Arrow buttons to scroll to Maintenance.

  3. Press the Select button .

  4. Use the left and right Arrow buttons to scroll to Clean Cartridges.

  5. Press the Select button .

The cleaning page prints. You may discard the cleaning page when printing is complete.
To clean the ink cartridge nozzles:

  1. Load plain paper.
  2. In Windows XP, click Start® Control Panel® Printers and Other Hardware® Printers and Faxes.

Click Printing Preferences.

The Printing Preferences dialog box opens.

  1. Click the Maintenance tab.

  2. Click Clean Print Cartridges.

The cleaning page prints. You may discard the cleaning page when printing is complete.

  1. If the print quality has not improved, click Clean Again.

  2. Print your document again to verify the improved print quality.

If you are still not satisfied with the print quality, wipe the ink cartridge nozzles, and then print your document again.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Thanks, Joe

Jan 20, 2011 | Dell 946 All-In-One InkJet Printer

1 Answer

How to print a usage page for HP color laserjet CP2025n


You can print usage page as follows via front control panel on the printer itself.



00af2c3.png


  1. Control-panel display: The display provides information about the product. Use the menus on the display to establish product settings.
  2. Back arrow ( ) button: Use this button for the following actions:
    • Exit the control-panel menus.
    • Scroll back to a previous menu in a submenu list.
    • Scroll back to a previous menu item in a submenu list (without saving changes to the menu item).
  3. Left arrow ( ) button: Use this button to navigate through the menus or to decrease a value that appears on the display.
  4. OK button: Press the OK button for the following actions:
    • Open the control-panel menus.
    • Open a submenu displayed on the control-panel display.
    • Select a menu item.
    • Clear some errors.
    • Begin a print job in response to a control-panel prompt (for example, when the message [OK] to print appears on the control-panel display).
  5. Right arrow ( ) button: Use this button to navigate through the menus or to increase a value that appears on the display.
  6. Cancel Job (X) button: Press this button to cancel a print job whenever the attention light is blinking or to exit the controlpanel
    menus.

Now follow these points to print th required page:

  1. Press OK to open the menus.
  2. Press the Left arrow ( ) or Right arrow ( ) button to navigate to Reports, and then press OK.
  3. Press the Left arrow ( ) or Right arrow ( ) button to navigate through the reports, and then press
  4. OK to print a report.
  5. Press X to exit the menus.
The following information pages are available:
  • Demo page
  • Menu structure
  • Configuration page
  • Supplies status page
  • Network configuration page
  • Usage report
  • PCL font list
  • PS font list
  • PCL6 font list
  • Color usage report
  • Service report
  • Diagnostics report

SOURCE

Oct 25, 2010 | Computers & Internet

1 Answer

I have a Mac Book. Recently installed an all-in-one epson sx515w. Whenever I try to print, a popup window says ''remaining ink level. Then, I get the message ''printer currently off line'' Can anyone...


First of all, check to make sure your printer's USB cable is securely connected in your Macbook's USB port.

Next, make sure your Epson SX515W has the latest drivers installed for your current version of Mac OS X
Link:
Mac OS X Drivers for Epson SX515W

If you already have the updated printer drivers for your Epson SX515W already installed,
go into System Preferences> Print & Fax and see if the printer is displayed in the Printer window. If it is, click the "-" Minus button and remove your current printer.
* Click the "+" Plus button and re-add that printer.
Once you do, make to set it as the default printer.
- Now attempt to print a test page from any document you have.

See if this does the trick. If if does not, just let me know.

Regards.

-Mactechtrainer

Jan 30, 2010 | Epson Stylus Multifunction Inkjet Printer/...

1 Answer

Have an iP90, but the color ink won't print.


Hi there,
When Printing Becomes Faint or Color are Incorrect, the Print Head Nozzles are probably clogged.
Follow the procedure below to clean the nozzles.
Step 1 : Printing the Nozzle Check Pattern.
Print the Nozzle Check pattern to determine whether the ink ejects properly from the Print Head Nozzles.
a) Using RESUME/CANCEL button.
I) Ensure that the printer is turned on, and then load a sheet of Letter Paper.
ii) Hold down the RESUME/CANCEL button until the POWER lamp flashes twice, and then release it immediately.

b) Windows
i) With the printer on, load a sheet of Letter-sized plain paper in the printer.
ii) Open the Printer Properties.
iii) Print the Nozzle Check Pattern.
Click the Maintenance Option from the Menu.Then click Nozzle Check from the pop-up menu. Then click Print Check Pattern.
iv) When the confirmation message is displayed, click OK.
v) Confirm the nozzle check pattern.

Examine the Print Nozzle.

Step 2 : Cleaning the Print Head.
a) Cleaning the Print head using RESUME/CANCEL button.
i) Ensure that the printer is on.
ii) Hold down the RESUME/CANCEL button until the POWER lamop flashes once, and then release it.
b) If you pressed the Cleaning button on the Examining the Nozzle.
Check Pattern screen displayed after the nozzle check patter was printed, start the Print Head cleaning procedure.
i) Ensure tha that the printer is on.
ii) Open the Printer Properties dialog box.
3) Start Print Head Cleaning,
- Click the Maintenance tab.
- Click Cleaning.
- Select the Print Head to be cleaned, and then click Execute.
iv) When the confirmation message is displayed, click OK.
Print Head cleaning starts when the POWER lamp starts blinking,
Important : Do not start any other operations until the Print Head Cleaning finishes. This takes about 60 seconds.
4) Check the Print Head condition.
i) Click the Print Check Pattern in the nozzle Check dialog appeared after cleaning are done. When the confirmation message is displayed, click OK. A nozzle pattern will be printed. Do not perform any operation until printing is completed.
ii) Observe the printed nozzle check pattern to check the Print Head condition.
iii) If the problem persists after you perforned Print Head normal cleaning 3 times, execute Print Head deep cleaning.

Step 4 : Print Head Deep Cleaning.
If print quality does not improve by standard Print Head cleaning, try Print Head deep cleaning, which is a more powerful process and comsumes more ink.

1) Ensure that the printer is turned on.
2) Open the Printer properties dialog box.
3) Start Print Head Deep Cleaning.
i) Click the Maintenance tab.
ii) Click Deep Cleaning.
iii) Select the Print Head to be cleaned, and then click Execute.
iv) When confirmation message is displayed, click OK. Print Head deep cleaning starts when the POWER lamp starts blinking,
Important : Do not perform any other operations until the Print Head deep cleaning is completed ( about 2-3 minutes).
4) Check the Print Head condition
i) Print a nozzle check pattern to check the Print Head condition.
ii) If the problem persists, perform step 3 again.
iii) If the problem persists, the printer may have run out of ink.
Replace the ink tank.
iv) If the problem persists, the Printer Head may be damaged. Contact your dealer or Canon Customer Care Center.

Hope this helps.
Have a good day.




















Dec 04, 2009 | Canon PIXMA iP90 Mobile Printer

2 Answers

Unexpected size in tray 2


whenever i took printout of a multipage file of Powerpoint. Everytime i have to preses the ok button to proceed with the print. because every page an eror comes displaying on screen of printer "UNEXPECTED SIZE IN TRAY 2" when i press the OK button it start printing the page. everytime i have to press the ok button to take print out. For example if i give a print command to a file that is having 15 pages. i have to press 14 times the ok button to complete the printing of 15 pages. pls help me in this

May 14, 2009 | HP LaserJet 2840 Printer

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...