I have a 2008 ar230 yamaha jet boat after winterizing it will not turn on or acknowledge that it is working. "Dead" Never had a problem before. No fuses out that I can see. Whats a fix ?
Sounds like the battery to me. How did you winterize it? was the fuel empty? was the battery disconnected and re-charged? It could be several problems, but easy to diagnose. need more clarification
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You'll see 2 small caps in the carburettor cover.
Do that fogging only in very well ventilated area ( outside thus).
Run the engine on idle, open both caps, spray as much fogging oil in both holes ( use 2 cans) till the engine stalls.
Close the caps.
Done...
Mate.You buy a new jet ski or don't sell it to anyone that wants a true ski.I will put your i.d. on a list.If you left the key on,you should,ve said so.
With the newer yamaha jet boats your route of easiest resistance is gonna be to take the boat to a Yam dealer so they can put a diagnostic machine on it. Alot of sensor problems can be solved much easier and cheaper after running the diagnostic and pinpointing exactly what the issue is. The lights on the dash are for high temp and low oil. If you checked the water temp and it seemed ok, check your oil levels.
×