Question about LG Projection Televisions

1 Answer

Just got a lg 32lt7 tv and i cant tune in the digi channels all i get is not programmed?

Posted by on

1 Answer

U need to plug jst the antena in the back and then go on auto tuning

Posted on Aug 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot get picture or sound but can get menu screen wont select or memorize channels on cable


this TV will not tune modern cable signals. You must use a set-top box with a TV that is this old.

Feb 14, 2015 | Mitsubishi VS-8087 80" Rear Projection...

1 Answer

On my jvc tv model hd-61g787 I cannot program channels


you can program channel either in the remote control or in the tv button panel. press menu then go to manual fine tune so you can program the channel one by one. you can use the volume up/down button to tuned the desired channel. to select channel use the channel up/down button.

Jun 01, 2013 | Projection Televisions

1 Answer

I just set it up (it is used) and I can't get to the "Channel Manager" in the setup menu, as it is grayed out. I can't auto program because of my inability to access this menu function.


Hi,
Channel menu will be grayed out if tv is set on AV Input, select TV source by remote or press any channel number to set tv on tv source, this will enable channel manager/ menu to tune channels in tv.
Hope these info will help you.
Thanks

Nov 25, 2010 | Hitachi 51F59 51" HDTV Projection...

1 Answer

We have bought a digi box for this tv but can not tune the tv


hello make sure the aerial is connected to the digi box then a lead from the digi box the the tv also connected a scart lead from the digi to the tv the go into the menu choose first time installion click ok the it should search

regards
shaun

Mar 27, 2010 | Projection Televisions

1 Answer

I can't get channels bwyond 13 and remote is gone so I can't reprogram for other channels. Can this be done withour the remote?


hopefully you have a menu button on your TV, if so you should be able to access auto program (you might have to search to find the auto search)but before you auto program make sure you set your TV to a cable setting then auto program. If you do not have a menu button on the TV, you could also try buying a universal remote. If you don't want to do that you could always use a VCR, just set your TV on channel 3 and do a auto program on the VCR ,using the VCR remote you should be able to tune in the channels your missing through the VCR.

Jul 07, 2009 | Projection Televisions

1 Answer

Programming Channels


Your TV is likely set for "AIR" tuning rather than "CABLE" mode. In this case channels above 13 don't tune correctly. The tuning mode is adjusted through the setup menu (it's been too long since I've seen one of these to remember exactly how the menu looks). Once you set the tuning mode for cable, all the available channels should come in properly.

But you've said you have satellite, so you should have a satellite receiver connected to your TV, and you'd be changing channels there rather than on the TV. Your TV would be staying on channel 3 or 4 (if using the satellite antenna output connection), or on the A/V input you have the satellite connected to (if using the direct A/V outputs). Am I missing something about your system?

Feb 18, 2009 | Mitsubishi WS-73905 73" Rear Projection...

1 Answer

Any idea why on my new sharp 32" lcd tv, all cable channels except 57 & 58 (CNN) work fine, but on these channels the sound goes off and on, like there is a short in the sound. all other tvs and cable work...


If you do not have problems with picture and sound on all the other working channels, then the problem you are having with 57 & 58 cannot be a short. The problem you are having is that those channels will not tune in properly through your tuner and this is why you get intermittent sound when they are trying to tune in. The sound tunes in easier than the picture. You said that you have programmed the channels again and I am assuming you are talking about the autoprogramming mode. Try to program those channels individually by deleting them and then readding them. If you cannot do that then you need to take the tv back since it is new or have warranty service look at your tuner and setup your tuner by making adjustments to it directly. Good luck and God bless.

Jan 22, 2009 | Projection Televisions

1 Answer

We have a sharp lcd tv c/w built freeview,the last couple of weeks it keeps losing just 1 channel ie bbc1 or itv1 every other channel is fine if we retune the tv everything goes back to normal, is it the...


no problem occur on your set but the only problem is you can not lock the fine tuning (in manual procedure) but is it better to set the program to AUTOSCAN OR AUTO PROGRAM and authomatically tune and save to the memory all the program channel

Apr 29, 2008 | Projection Televisions

1 Answer

I have a philips tv that i bought without a remote, and then bought a philips universal remote but am stuck on how to tune the channel with the remote. Very frustrating, cannot locate sticker stating brand...


here is a link to the phillips universal remote page that has all the codes for any brand tv including phillips and it will explain how to program the remote try the codes for phillips one of the codes should work.
http://www.universal-remote.net/philipsmagnavox.html

Apr 08, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Projection Televisions Experts

Lawrence Oravetz

Level 3 Expert

7686 Answers

J.D. Browning
J.D. Browning

Level 3 Expert

2621 Answers

Are you a LG Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...