Question about Brother P-Touch 1180 Label Printer

Open Question

P-Touch 1950 label maker

The white lever is up and the instructions say: Do not move this lever manually. By doing so will cause cover closure problems.

How do I get the lever down and the cover back on.

Posted by on

2 Suggested Answers

  • 1 Answer

SOURCE: Have Downloaded "instructions" for PT-1280.................

1. Your site and the search engine I used state "free" help - no plan or package mentioned.

2. My question was in regard to a PT-1280.

3. I simply asked if anyone knew how I could get the instructions for this label maker larger as the download has every thing squeezed on 2 pages with the type so small it can't even be read correctly without straining with a magnifier. It comes as a PDF file and cannot be cut - stretched or enhanced anyway that I know to do.

Thank you for your email asking if I would like find out about your plans. The questions I have would be related to my equipment I use at work and I am not even going to consider digging in my pocket for anything. The equipment I use at home is wireless and works excellently and as I stated originally I do everything - including labels and programming from my personal computer.

Posted on Jan 16, 2009

  • 1 Answer

SOURCE: Brother P touch label maker language settings? how

Tune machine off. Press and hold F and the delete button (2 buttons below the F). Whilst holding these down, turn the unit on by pressing and releasing the power button. Then release the F and delete buttons and the language option will appear.

Posted on Jul 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P-Touch Model PT-65 Home and Hobby Label Maker - Loaded a new cartridge and it will not feed through


Sir/Madam

Its Very Easy To Fix This Issue,Just Follow Few Simple Step and You Solve Your Problem By Your Own,

Read Below Instruction,

1Turn off the label maker before installing the tape.
2Press the part marked as "<<" and lift the cassette cover.
3 Position the tape into the slot. Make sure to feed the end of the tape under the tape guides.
4Check that the lever is up before closing the cover; the cover will not close if the lever is pressed down.
5Close the cassette cover.
6 Press the power key to turn on the device. If using an AC adapter, plug the adapter into the wall then press the power key.
7Type a sample to test if your installation was successful.

Read more: http://www.ehow.com/how_7526530_install-tape-ptouch-label-maker.html#ixzz2pMqUU0oU

Jan 02, 2014 | Brother BRTPT65 PT-65 Label Maker Printer

1 Answer

"no tape" error


I found 2 helpful manuals from brother that you may want to checkout. they explain exactly how to install the cartridge:
http://www.ptouchdirect.com/ptouch/manual/PT1000.pdf
http://www.ptouchdirect.com/ptouch/manual/PT85.pdf

Feb 18, 2013 | Brother P-Touch PT-2400 Label Tape OEM...

2 Answers

Lever blocked on P


Disconnect cable at gear box end & try to move. If lever moves fault at g.b if still stuck strip lever & check cable etc

Aug 13, 2012 | 2003 Jaguar S-Type

1 Answer

How do i put my honda fit in neutral? the battery is dead and i need to move it back so i can get it jumped. it will not go in neutral.


Pull down the lever on the left side of the steering wheel which will in turn lower the steering wheel, then open the cover on the top of the steering wheel, lift open slightly not all the way, then you will see a white lever, press down the break then gently push down the white lever to put the gear in neutral, make sure you put the gear in neutral, remember you have moved the cover from the original position. Hope it helps. God Bless.

Aug 21, 2011 | Honda Fit Cars & Trucks

1 Answer

Door does not open or close when using the remote. It closes only when pressing the hard wired square white touch pad. Behind the opaque white touch pad, one can see a flashing/blinking green light.


Using a step stool, reach up and remove the covers (the white covers pop off). The instructions will be labeled on the back plate for setting your remote control's security code Make sure the remote has a battery installed and is compatible with your garage door opener. Or go to the LiftMaster web site and down load its operators manual.
.

Jul 27, 2011 | liftmaster Garage Door 1/2 Hp

1 Answer

Ink cartridges will not move in place error # 1200


Lexmark X4270 Error 1200 Fix - Click here for document link

1. Unplug printer from wall and remove power supply.

2. Unplug any phone lines or USB cords connected.

3. Remove printer attachments, paper trays and phone.

Figure 1 - Printer paper holder and completed print tray

4. Lift the front cover of the printer and remove the white rubber bar by pulling the blue lever on right towards you.

Figure 2 - Top view of printer showing the white rubber feed bar with purple attachment

5. Remove the screws underneath the front cover (6 screws), back of printer (2 screws), and bottom of printer (1). View the images below to find where to remove the screws.

Figure 3 - Top view of printer showing which screws to remove.

5. Cont...

Figure 5 - Bottom view of printer. Image on left is cover to screw. Gently remove ribbon cable to reveal the gold screw beneath

6. Flip the front cover open and gently lift the top of the printer cover. Keep front cover open.

7. Remove the ink cartridges out of their carriage.

Figure 6 - Displays ink cartridge carriage with ink cartridges removed.
Caution: Electrical hazard. Keep hand and metal pieces clear of board or any other electrical wires or parts.

NOTICE: The ink cartridges are all the way to one end. If the X4270 is plugged in, the cartridge carrier is stuck and doesn't move. After further investigation a noticeable small black plastic lever is preventing the ink cartridges from moving. Photo below shows lever up and down (cartridges already moved in image below).

Figure 7 - Shows inside of X4270 and the lever that causes error #1200. Image on left displays lever up. Image on right displays lever down.

8. Push lever down clockwise so it is flush with plastic wall. Refer to image on right in Figure 6.

9. Lift the front cover open (if not already open) and plug in the X4270. Cartridges should move to center as if preparing for replacement.

10. Unplug the X4270 and remove power supply.

11. Remove bottom assembly carefully.

Figure 8 - Displays bottom assembly with lever and spring
Note: The cause of this problem is the spring slides out of place over time, probably because of ink shed on one end of its loop and loop attachment.

Figure 9 - Displays loop attachment

12. Place spring in loop attachment and use hot tip of heated tool to melt top of loop attachment to prevent further errors. Melt top of loop attachment similar of that to a mushroom top.

Figure 10 - Displays fix for jammed carriage.

13. Reattach the lever to the bottom assembly and slide back into place inside the X4270.

14. Plug in and check if operational.

15. Reassemble X4270 using steps 3-7.

Jan 31, 2011 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

It wont print and everytime i try to print it says error #1200


1. Unplug printer from wall and remove power supply.

2. Unplug any phone lines or USB cords connected.

3. Remove printer attachments, paper trays and phone.

Figure 1 - Printer paper holder and completed print tray

4. Lift the front cover of the printer and remove the white rubber bar by pulling the blue lever on right towards you.

Figure 2 – Top view of printer showing the white rubber feed bar with purple attachment

5. Remove the screws underneath the front cover (6 screws), back of printer (2 screws), and bottom of printer (1). View the images below to find where to remove the screws.

Figure 3 - Top view of printer showing which screws to remove.

5. Cont…

Figure 5 - Bottom view of printer. Image on left is cover to screw. Gently remove ribbon cable2_bing.gif to reveal the gold screw beneath

6. Flip the front cover open and gently lift the top of the printer cover. Keep front cover open.

7. Remove the ink cartridges2_bing.gif out of their carriage.

Figure 6 - Displays ink cartridge2_bing.gif carriage with ink cartridges removed.
Caution: Electrical hazard. Keep hand and metal pieces clear of board or any other electrical wires or parts.

NOTICE: The ink cartridges are all the way to one end. If the X4270 is plugged in, the cartridge carrier is stuck and doesn’t move. After further investigation a noticeable small black plastic lever is preventing the ink cartridges from moving. Photo below shows lever up and down (cartridges already moved in image below).

Figure 7 - Shows inside of X4270 and the lever that causes error #1200. Image on left displays lever up. Image on right displays lever down.

8. Push lever down clockwise so it is flush with plastic wall. Refer to image on right in Figure 6.

9. Lift the front cover open (if not already open) and plug in2_bing.gif the X4270. Cartridges should move to center as if preparing for replacement.

10. Unplug the X4270 and remove power supply.

11. Remove bottom assembly carefully.

Figure 8 - Displays bottom assembly with lever and spring
Note: The cause of this problem is the spring slides out of place over time, probably because of ink shed on one end of its loop and loop attachment.

Figure 9 - Displays loop attachment

12. Place spring in loop attachment and use hot tip of heated tool to melt top of loop attachment to prevent further errors. Melt top of loop attachment similar of that to a mushroom top.

Figure 10 - Displays fix for jammed carriage.

13. Reattach the lever to the bottom assembly and slide back into place inside the X4270.

14. Plug in and check if operational.

15. Reassemble X4270 using steps 3-7.

Click Here for the Documents

May 03, 2010 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

Error 1203


Hi there

ERROR 1203 LEXMARK ERROR 1200 Error 1203 is an issue that occurs either when a cartridge is bad or the printer cartridge Slot is bad...

1 - try cleaning the copper contacts of the both carts and cart slot in the printer and try again..
or
2 - when error shows up, shut the printers power off; wait one minute and turn it back on press copy.

Posted by LEH at 5:39 AM
Labels: Lexmark x
1 comments:
MarCrazy said...
Lexmark X4270 Error 1200 Fix - Use link below to see how to fix

Text version below use link above to see pdf with images.

1. Unplug printer from wall and remove power supply.

2. Unplug any phone lines or USB cords connected.

3. Remove printer attachments, paper trays and phone.

Figure 1 - Printer paper holder and completed print tray

4. Lift the front cover of the printer and remove the white rubber bar by pulling the blue lever on right towards you.

Figure 2 – Top view of printer showing the white rubber feed bar with purple attachment

5. Remove the screws underneath the front cover (6 screws), back of printer (2 screws), and bottom of printer (1). View the images below to find where to remove the screws.

Figure 3 - Top view of printer showing which screws to remove.

5. Cont…

Figure 5 - Bottom view of printer. Image on left is cover to screw. Gently remove ribbon cable to reveal the gold screw beneath

6. Flip the front cover open and gently lift the top of the printer cover. Keep front cover open.

7. Remove the ink cartridges out of their carriage.

Figure 6 - Displays ink cartridge carriage with ink cartridges removed.
Caution: Electrical hazard. Keep hand and metal pieces clear of board or any other electrical wires or parts.

NOTICE: The ink cartridges are all the way to one end. If the X4270 is plugged in, the cartridge carrier is stuck and doesn’t move. After further investigation a noticeable small black plastic lever is preventing the ink cartridges from moving. Photo below shows lever up and down (cartridges already moved in image below).

Figure 7 - Shows inside of X4270 and the lever that causes error #1200. Image on left displays lever up. Image on right displays lever down.

8. Push lever down clockwise so it is flush with plastic wall. Refer to image on right in Figure 6.

9. Lift the front cover open (if not already open) and plug in the X4270. Cartridges should move to center as if preparing for replacement.

10. Unplug the X4270 and remove power supply.

11. Remove bottom assembly carefully.

Figure 8 - Displays bottom assembly with lever and spring
Note: The cause of this problem is the spring slides out of place over time, probably because of ink shed on one end of its loop and loop attachment.

Figure 9 - Displays loop attachment

12. Place spring in loop attachment and use hot tip of heated tool to melt top of loop attachment to prevent further errors. Melt top of loop attachment similar of that to a mushroom top.

Figure 10 - Displays fix for jammed carriage.

13. Reattach the lever to the bottom assembly and slide back into place inside the X4270.

14. Plug in and check if operational.

15. Reassemble X4270 using steps 3-7.

Apr 07, 2010 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

I get a 1200 error when trying to fax


Lexmark X4270 Error 1200 Fix - Click here for document link

1. Unplug printer from wall and remove power supply.

2. Unplug any phone lines or USB cords connected.

3. Remove printer attachments, paper trays and phone.

Figure 1 - Printer paper holder and completed print tray

4. Lift the front cover of the printer and remove the white rubber bar by pulling the blue lever on right towards you.

Figure 2 – Top view of printer showing the white rubber feed bar with purple attachment

5. Remove the screws underneath the front cover (6 screws), back ofprinter (2 screws), and bottom of printer (1). View the images below tofind where to remove the screws.

Figure 3 - Top view of printer showing which screws to remove.

5. Cont…

Figure 5 - Bottom view of printer. Image on left is cover to screw. Gently remove ribbon cable to reveal the gold screw beneath

6. Flip the front cover open and gently lift the top of the printer cover. Keep front cover open.

7. Remove the ink cartridges out of their carriage.

Figure 6 - Displays ink cartridge carriage with ink cartridges removed.
Caution: Electrical hazard. Keep hand and metal pieces clear of board or any other electrical wires or parts.

NOTICE: The ink cartridges are all the way to one end. If the X4270 isplugged in, the cartridge carrier is stuck and doesn’t move. Afterfurther investigation a noticeable small black plastic lever ispreventing the ink cartridges from moving. Photo below shows lever upand down (cartridges already moved in image below).

Figure 7 - Shows inside of X4270 and the lever that causes error #1200.Image on left displays lever up. Image on right displays lever down.

8. Push lever down clockwise so it is flush with plastic wall. Refer to image on right in Figure 6.

9. Lift the front cover open (if not already open) and plug in theX4270. Cartridges should move to center as if preparing for replacement.

10. Unplug the X4270 and remove power supply.

11. Remove bottom assembly carefully.

Figure 8 - Displays bottom assembly with lever and spring
Note: The cause of this problem is the spring slides out of place overtime, probably because of ink shed on one end of its loop and loopattachment.

Figure 9 - Displays loop attachment

12. Place spring in loop attachment and use hot tip of heated toolto melt top of loop attachment to prevent further errors. Melt top ofloop attachment similar of that to a mushroom top.

Figure 10 - Displays fix for jammed carriage.

13. Reattach the lever to the bottom assembly and slide back into place inside the X4270.

14. Plug in and check if operational.

15. Reassemble X4270 using steps 3-7.

Feb 16, 2010 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

Cartridge error 1203


Error 1203 is an issue that occurs either when a cartridge is bad or the printer cartridge Slot is bad...

1 - try cleaning the copper contacts of the both carts and cart slot in the printer and try again..
or
2 - when error shows up, shut the printers power off; wait one minute and turn it back on press copy.

Posted by LEH at 5:39 AM
Labels: Lexmark x
1 comments:
MarCrazy said...
Lexmark X4270 Error 1200 Fix - Use link below to see how to fix

Text version below use link above to see pdf with images.

1. Unplug printer from wall and remove power supply.

2. Unplug any phone lines or USB cords connected.

3. Remove printer attachments, paper trays and phone.

Figure 1 - Printer paper holder and completed print tray

4. Lift the front cover of the printer and remove the white rubber bar by pulling the blue lever on right towards you.

Figure 2 – Top view of printer showing the white rubber feed bar with purple attachment

5. Remove the screws underneath the front cover (6 screws), back of printer (2 screws), and bottom of printer (1). View the images below to find where to remove the screws.

Figure 3 - Top view of printer showing which screws to remove.

5. Cont…

Figure 5 - Bottom view of printer. Image on left is cover to screw. Gently remove ribbon cable to reveal the gold screw beneath

6. Flip the front cover open and gently lift the top of the printer cover. Keep front cover open.

7. Remove the ink cartridges out of their carriage.

Figure 6 - Displays ink cartridge carriage with ink cartridges removed.
Caution: Electrical hazard. Keep hand and metal pieces clear of board or any other electrical wires or parts.

NOTICE: The ink cartridges are all the way to one end. If the X4270 is plugged in, the cartridge carrier is stuck and doesn’t move. After further investigation a noticeable small black plastic lever is preventing the ink cartridges from moving. Photo below shows lever up and down (cartridges already moved in image below).

Figure 7 - Shows inside of X4270 and the lever that causes error #1200. Image on left displays lever up. Image on right displays lever down.

8. Push lever down clockwise so it is flush with plastic wall. Refer to image on right in Figure 6.

9. Lift the front cover open (if not already open) and plug in the X4270. Cartridges should move to center as if preparing for replacement.

10. Unplug the X4270 and remove power supply.

11. Remove bottom assembly carefully.

Figure 8 - Displays bottom assembly with lever and spring
Note: The cause of this problem is the spring slides out of place over time, probably because of ink shed on one end of its loop and loop attachment.

Figure 9 - Displays loop attachment

12. Place spring in loop attachment and use hot tip of heated tool to melt top of loop attachment to prevent further errors. Melt top of loop attachment similar of that to a mushroom top.

Figure 10 - Displays fix for jammed carriage.

13. Reattach the lever to the bottom assembly and slide back into place inside the X4270.

14. Plug in and check if operational.

15. Reassemble X4270 using steps 3-7.

February 27, 2010 10:27 AM

Feb 06, 2010 | Lexmark X7170 All-In-One Scan/Copy/Fax and...

Not finding what you are looking for?
Brother P-Touch 1180 Label Printer Logo

Related Topics:

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...