posted by Darryl22005 on May 02, 2008
Hi you doing I have a wavy 3d picture on the right side of my tv i think the red light is causing this i dont know what to do please help
Solution #1
posted on May 24, 2008
If you do not have hand soldering skills or know how to use a multimeter, I would suggest to replace the whole assembly.
If you know how to solder you can just replace 2 ICs that are mounted on the big black heatsinks and possibly 1 or more resistors.
Click here to find the entire assembly for your TV.
Good Luck.
If you know how to solder you can just replace 2 ICs that are mounted on the big black heatsinks and possibly 1 or more resistors.
Click here to find the entire assembly for your TV.
Good Luck.
Was this solution helpful? Show your Appreciation by rating it:
Suggest a new solution for this problem
Post a New problem for JVC AV-56WP74 56 in. Rear Projection
Email this problem
Post a New problem for JVC AV-56WP74 56 in. Rear Projection
Email this problem
Can you Help with these Projection Televisions problems?
JVC AV-56WP74 56 in. Rear Projection...
I ART PRO JVC 56
I ART PRO JVC 56
im getting double pictures... Answer This...
JVC AV-56WP74 56 in. Rear Projection...
red color trouble
red color trouble
my projection tv has a red... Answer This...
JVC AV-56WP74 56 in. Rear Projection...
JVC 56in. is broken
JVC 56in. is broken
My rear projection tv isbroke... Answer This...
Repair Service
Find Projection TV Repairman Near You:
