Question about Radio Communications

1 Answer

Programming I have no idea how to programme this. Help will be appreciated. Thanks

Posted by on

  • 6 more comments 
  • Anonymous Aug 25, 2008

    Lost the directions on my pro94 and want to program some new frequencies into it??? Help!!!!!!!!!!

  • sask_girl03 Aug 27, 2008

    just needing codes and to program this thing for my husband

  • Anonymous Aug 28, 2008

    need steps to clear and program

  • booger23 Aug 28, 2008

    steps how to clear and program

  • Anonymous Sep 21, 2008

    having a little trouble

  • Anonymous Oct 06, 2008

    how do i prigram a handheld scanner

  • Anonymous Dec 21, 2008

    need manual and programing guide

  • Anonymous Dec 27, 2008

    I have a Pro 95 I picked up a couple of years ago. The local agencies are now going to the 800 system. I am having major problems programming and the local radio shack is no help, they claim that it CAN"T receive the 800 freq's and that they could sell me a model that could. if any one can help me figure this out I would appreciate it.



1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How do I program this...old systme but I just opened the box

Posted on May 02, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Have an online manual for LS4004 I000. How do I get the scanner to transmit an enter key after scanning a barcode?

try reprogrammimg, it should default after it scans an item to enter whaT WAS SCANNED

Jan 31, 2013 | Computers & Internet

1 Answer

I have a new VW Key Fob from Ebay. What is the most cost effective way, and known way to re-programme my new key fob for my VW Passat 2003? There is a lot of info out there, most outdated. Do I really...

Key added or replaced. System malfunction.
How -

Keys can only be programmed using diagnostic equipment.
NOTE: A maximum of 4 keys can be programmed.
How - 99MY

Switch ignition ON. Insert key to be programmed into driver's door lock. Lock vehicle manually. Press lock or unlock button. Wait at least 1 second. Press lock or unlock button again. Vehicle horn sounds to indicate correct programming. Keys can also be programmed using diagnostic equipment
Above is how to re-programme a replacement key/remote

Jul 19, 2011 | 2003 Volkswagen Passat

1 Answer


not sure, but could check - manual/program setting. there may be a program running, if so just turn to manual. Check owners manual or manufacturer website for instructions for programming

Jun 21, 2009 | Hunter Fan Company 5/1/1 Programmable...

1 Answer

Programming a Lange Oven

go to the have the manual for your oven in the top right corner

Jun 17, 2009 | Lang Manufacturing EHS-APM Electric Oven

1 Answer

Can any one help me, I need to programme a norstar for ddi

You need to go into system administration and setup "Target Lines" for each DDI number. Then assign the Target Lines to telephones. Please refer to your administration manual for programming instructions as different systems & different levels of software will have a unique range of numbers for target lines.
Good Luck!

Apr 01, 2009 | NorStar T7316E Phone

1 Answer


Does it have a reset button.use paper clip and hold in until reset, if no give model number. Please rate. Thanks

Mar 17, 2009 | Solar Leviton 6651 Decora Programmable...

1 Answer

How do I programme the raised cash tendered keys on Casio tk2300

It sounds like you have a CASIO. On most of them, you place extra CASH buttons in those locations (prog 4 mode). Then you go to prog 1 mode and price the CASH buttons.
If you have trouble, let me know the model.


Feb 09, 2009 | Casio Parts Cash Register PC Desktop

1 Answer

Programming a USB PSC QS6000 Plus

Everything you need is came from your system mechanism. The only way to control your requirements is came from your programm coding.

at the start of the string sending must be filtered and rearrange from your program mechanism.

From what system you need to used barcode scanner? Are you using POS?

Hope you like my solution please rate me Solved.

best regards,


Nov 04, 2007 | PSC QS6000 Plus Handheld

1 Answer

Fitting new module

just switch off the machine and re start the programming procedure again did you get the programme sheet with the module

Jun 13, 2007 | Hotpoint WMA13 Front Load Washer

Not finding what you are looking for?
Radio Communications Logo

Related Topics:

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Radio Communications Experts


Level 3 Expert

1654 Answers

Brad Brown

Level 3 Expert

16847 Answers

Mike Charette

Level 3 Expert

1795 Answers

Are you a Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides