Image Reversed on LCD

Every modern projector that I have seen has a setting that will allow you to flip the image for this.If you purchased it used it was probably configured as a ceiling mount in an upside down orientation or rear projection onto a translucent screen. (The projection method can be set from the "OPTION2" menu. in a Model LM1 so it should be similar. http://service.us.panasonic.com/OPERMANPDF/PTLM1U.PDF

If yours doesn't have this option, then you'll have to use mounts that require the projector to be upside down.

Unfortunately tripod will not help you with freezing movement. You need to use higher ISO setting or flash light. I know they degrade image quality (each in its own way) but I can give you a small tip how to use flash. Reflected light is softer and has more natural look on pictures. Try to use a small mirror to direct your flash light to a ceiling or wall. Also read about exposure correction in your camera in user manual (as pictures taking this way might be a bit dark).

You don't need the software. Just get a card reader and download to a folder you create on your desktop.

The lcd screen has snesors inside that tell the camera which way to display. If it is not correct, you should take it to a service company, since one of it might be broken. Let me know how it turned out for ya.

http://www2.panasonic.com/consumer-electronics/support/Cameras-Camcorders/Digital-Cameras/Lumix-Digital-Cameras/model.DMC-FZ50K for pdf version of manual. The K or S means the color of camera you have...black or silver. My wife has that camera, there is no way to display the date/time on the pictures themselves, you will have to look at the properties of the image. All images now contain certain data that is hard for the novice to change and might be able to be used in certain courts...good luck, hope it's not too late.

no solution I know and I have the same problem!!! Did you find a solution yet???

Use the remote to go into the menu and change the screen position. There are 4 to choose from, flip left, flip right, flip upside down left, flip upside down right. It may be tricky to navigae the menu backward though.

The flex strip is cut and thats why you are facing that problem ... please use it the way it works till you can ,,,,, when it completely goes dead have it replaced by a repairman ....

Hi,

when you are replaying your pictures you use the front turning switch, not the manual focus ring.

Hope I helped, please rate my answer if you like it.
Vladimir

There should be a button on the camera to turn on the LCD screen so you can see whats going on. Here is a link to the manual. http://service.us.panasonic.com/OPERMANPDF/DMCLZ1.PDF Look on page 10, button 6. After the camera is turned on, wait 20 seconds, then hit that button and see if the screen turns on. Hope that helps.