My webcam works fine but when i go on msn and try to video call it shows a camera with a big red X and i cant see myself

The latest WLM has removed the webcam option - its Video only

Test your webcam here to make sure it broadcasts ok - Hit 'Allow' in the top window and check your cam in the left hand panel.

http://www.testmycam.com/

Having proved your cam is working ,you can configure it to WLM (MSN)

CONFIGURE SOFTWARE to MSN
Its good practice to disconnect and re-connect your webcam before you start - if you have been using it elsewhere the MSN software may have difficulty in locating it, even if you exited the previous program correctly.
The reason being, the webcam software can remain hooked-up to a program and needs to be rebooted.
Mine, I just unplug it from the USB and plug it back in to reboot the software.
If yours is integral with the computer you will have to re-start the computer, use a keyboard shortcut or disable / enable the webcam from the Device Manager.

Open MSN
Click 'Open Menu'
From 'Tools; navigate to, and click, 'Audio and Video setup'
Set your speakers
Click 'Test' - if OK, move on.
Set your mic as default
Use the slider to set volume and test.
Click 'Next'
This takes you to the video setup
Your webcam should be broadcasting - if not - make sure the webcam is set as default - restart MSN
Use 'Webcam Settings'to fine tune the picture.
Click 'Finish'

try un instaling the soft whear and re installing it but dont plug cam in to usb until you are prompt by computer to do so and then go to settings and make shure you activate it

Open msn
Plug webcam in
Click (>) show menu > tools > audio and video set-up > run through mic and speaker tests > next > set your camera as defaut and adjust settings > finish

check your display picture setting/options or webcam options/settings on msn!

please help me to solve this problem of web cam

In msn live click on show menu then tools option for cam setup
If that don't work click again show menu then actions then video then show my webcam or start video conversation.
If taht does'nt work then I would assume it's something in your camera setup itself

i found its just not firewall. your port is being blocked, some company have blocked ports in some cases.

but check to see if you have norton system works or norton 360. if you do then its probably more than just firewall.

I myself dont like these program, they have always cause trouble.

try shutting them off completely. and then try it



I’m happy to help further over the phone at https://www.6ya.com/expert/david_92c86cbc79e9b552

Hi, I am attempting to use the camera on ie as a video call problem is i can see a black screen. The camera is work as i can see myself on its software. I tried going to msn setting but have had no luck. it seems that the two the camera and ie

i can see the other person but NEVER my myself!!! i need help
im am trying to chat via AOL AIM.