- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There is no separate driver for the headphones.The audio driver which is installed in the computer is enough.Please check whether you have correctly inserted the jack.That will be the only problem for it.
There will be three jack socket behind the PC CPU.Blue,Green, and Red.
Green for speakers/head phones
Red for MIC
Check whether jack are correctly installed.
Maybe you have a lose or bad analog connection to the headphones, however my husband got a refurbished wireless game controller that I found to have a lose and dirty plug and the headset was fine after I took the controller apart, gently reconnected to post and cleaned it out with alcohol and q-tips just like you would use for a computer mouse. Peace, Love and Hair Grease from the ToyzRUsKddom
You use headsets to have conversations over the internet .. or to have a personalised audio equipment,.
You should have used the mic to start with, as you heard over the speaker your voice,
There are two pins. One for MIc and other for the headphones.
Use mic only when recording. other times keep it muted in control panel-> sound and audio...
you can use headphone for hearing when you don want the audio stream to be on speakers., TO use so, you have to take of the output from the CPU to the headphone pin after removing the speaker pin or configuring the audio controls control panel-> sound effect manager to have sound always in both theh speakers and headphones.
This requires you to have an appropriate configuration so that all 3 pins are aptly placed fot output from the CPU.
Hope you got what you asked for!
Sometimes you need to "burn in" your headphones. Used headphones
usually produce a better sound than new ones. Simply let it play some
music continuously. I usually burn in my headphones with some AM/FM
static. After a while, the sound should improve. Good luck!
whilst the headphones are in use flex the cable from the non working speaker bit by bit down to the jack you should find it will work at some point down the cable as I suspect after long use you will have a break in the cable once this is located just splice the cable and make the break good with a soldering iron, hope this helps