Question about Kenmore 80754 Top Load Stacked Washer / Dryer

1 Answer

Kenmore Ultra Fabric 80 HvyDty machine won't drain (much)

Hello,

I'm stuck without some troubleshooting assistance.

The washer was stuck at 8 (of 14) for over an hour with the tub mostly full. Every few minutes it would kick on for a few secs and agitate. I sucked out as much as possible with the Shop Vac and pulled the hoses off the pump. Nothing between the tub and the pump or the pump and the wall drain. Couldn't see anything in the pump either.

Any way to know for sure the problem is a bad pump? Almost certainly?

Worth repairing a machine this old?


Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,028 Answers

Probably bad motor ..motor overheats shuts off on safety after cool down comes back and repeats cycle

Posted on May 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Leaking washer, increases when using cold, less when using hot. May be at drain?


Stop the washer and clean up the water. Confirm that the water is not leaking when the washer is off. The leak can occur before the electric valves either where the hose connects or from the electric solenoid valves just inside the washer. The situation is more likely true if the hoses are stressed by being bent to one side.

If dry then confirm if it is the hot or cold by running the machine with the cold service valve open and hot closed.


26040560-ygp4wnkres3ekniwc32iwowp-4-0.jpg

Jan 06, 2016 | Washing Machines

1 Answer

I have a kenmore ultra fabric care washer heavy duty 80 series with electronic temperature control and I can only get hot water not cold.


If it used to work and now does not, either the valve that controls the water inlet to the hot is bad or the temp sensor in the machine is bad. What is the whole model number?

Mar 22, 2015 | Kenmore Washing Machines

1 Answer

Is there a belt on a kenmore ultra fabric care heavy duty 80 series


No. What is the problem you are having? Let me guess, it's not spinning or agitating?!
What is the model number listed under the lid?

Nov 03, 2012 | Kenmore 24032\24036 Top Load Washer

1 Answer

I have a Kenmore Ultra Fabric Care Heavy Duty 80 Series, Model # 92588210, Stock # 25882 that is off balance on every load. After the last few loads the bucket is leaning toward the front. What could be...


This assumes that you have a basic Kenmore / Whirlpool top load, direct drive, neutral drain (it doesn't spin until the pump removes most of the water) machine.

First, see the Sears parts site for your washer:

http://www.searspartsdirect.com/partsdirect/part-model/Kenmore-Parts/Washer-Parts/Model-11092588210/0582/0153200?pathTaken=

and you'll see a list of major sub-components with diagrams and parts.

If you look at the section on "Machine Base Parts" you'll see a number of springs and vibration pads.

It's possible that one or more of the springs or pads has come loose or broken.

In order to get to them you have to remove the cabinet.

Here is a description of how to do it.

http://www.american-appliance.com/catalog/newsdesk_info.php?newsPath=16&newsdesk_id=131&osCsid=90fdc122f6335c7c64f46f2ea1b1c887


Also see the Whirlpool Service Manual for top load washers. It has a troubleshooting section that describes the reasons for excessive walking or vibration.

WHIRLPOOL INST AND MAINTENANCE INCLUDING HOW TRANSMISSION WORKS

https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/f7e2147fa98b28cf85257122007475cb/$FILE/L-55.pdf


WHIRLPOOL TRANSMISSION DESCRIPTION AND SPRINGS

https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/2550f737b3129b0c85256b0600504738/$FILE/787772%20%234.pdf

Jan 05, 2011 | Kenmore Washing Machines

1 Answer

Direct drive-type Kenmore washer will not spin.


Check the video at the following link. I think you will find it helpful. Hope so and best wishes.

http://www.youtube.com/watch?v=WLPGs2UMUJc

Sep 14, 2009 | Washing Machines

1 Answer

Kenmore washing machine will not drain


Replace the timer.
This is a neutral drain machine. If there is no natural pause in the timer at the end of the rinse cycle the timer is bad.

Mar 13, 2009 | Kenmore Washing Machines

1 Answer

Kenmore ultra fabric care 80 seris washer


did you try checking your belt to see if its real lose?That might be it!.I have a question for you about this washer,do you know where the lint catcher is?.

Oct 17, 2008 | Kenmore 24902 Top Load Washer

Not finding what you are looking for?
Kenmore 80754 Top Load Stacked Washer / Dryer Logo

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...