Question about PC Desktops

2 Answers

Installed WMP54GS and am getting the following error from Linksys Wireless Network Monitor Access violation at address 0040744D in module WMP54GSv1_1.exe'. Read of address 00000368

Posted by on

  • meandmegh Nov 26, 2008

    I'm having the same problem ... anyone know the fix?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Possibly you have installed the WLAN monitor also that is why it is creating the error...try these settings... Reboot your computer in SafeModeUninstall the software for the Adapter from start >> All programs/Remove the Drivers from Device Manager...Turn your computer Off and connect the adapter in a different PCI Slot...Reboot your computer in Normal Mode...
>> Insert the Setup CD in the cd drive>> Click on Exit when the
Linksys welcome screen appears>>Click on start. Unplug & replug adapter ...>> There should be a "" Found New Hardware Wizard ""
that pops up on your screen>> Click on “Install software
automatically “, and then click on next. Once the installation is
complete>> Right click on the wireless network connection icon in the
system tray besides the clock >>Click on view wireless networks and
then connect to your network name...

Posted on Jan 28, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I ran into the exact same thing, and basically the root cause of the problem is that the software was installed after you put the card into your computer.

The fix to this is to completely remove your adapter from the device manager and reboot with the software already installed (remember: the software told you to insert the adapter after you installed the software - not very intiutive if you ask me).

On the next boot you may see that message again, however the computer will also find the adapter. Let it run its course.

The next time you reboot you'll notice the access violation is gone.

P.S. I would love to post this on the Linksys forms that are misguiding everyone, however their cheep UNIX server won't let me.

Posted on Apr 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Forgotten password for wifi network


Which operating system ??
Your wireless Internet password is the encrypted security pass phrase that was set up when you installed your wireless router.

Your router allows you to access the Internet.
If you have access to more than one wireless network, you may need to remember multiple passwords.

If you happen to forget one password, you have two options: reset your password or locate the current password.

Windows 7 allows you to view the security characters of all your wireless network passwords.
Click the "Wi-Fi" network icon located on the Window's taskbar.


Right-click the name of your network's "SSID" name and select "Properties" from the drop-down menu.


Click the "Security Tab." The network security key is now visible but unreadable.


Click the "Show Characters" check box and this will reveal your wireless password.

http://www.thewindowsplanet.com/939/how-to-recover-wi-fi-network-key-in-windows-7.htm

or
Reset My WiFi Password

Wireless networking is a common feature in homes and offices.
Wireless routers provide access to a single Internet source, and wireless passwords ensure that only select users can access the network.

If a password is forgotten or lost, the password can be recovered or reset by accessing the router's Web-based settings menu.

Most wireless routers also have a reset button, which is capable of returning the router to its default settings which includes resetting the password.

Connect to your Wi-Fi or attach your computer directly to the router with an Ethernet cable.
Open your Web browser.

Enter the default address of your router.
The default address is listed in your user manual or on the product website.

Linksys and 3Com routers typically use "192.168.1.1" while Netgear routers use "192.168.0.1."
Enter your username and password.

Many routers use "admin" for the username and password by default.
Locate the wireless security settings. Disable the wireless security.

Reset to Factory Defaults

Locate the reset button on your router.
Typically the reset button is a small indented hole on the back of the device.

Insert a long thin object such as a paperclip and hold down the reset button for 30 seconds to revert the router to its factory default settings.

Open your Web browser.
Enter the default address of your router.

The default address is listed in your user manual or on the product website.
Linksys and 3Com routers typically use "192.168.1.1" while Netgear routers use "192.168.0.1."

Enter your username and password.
Many routers use "admin" for the username and password by default.

Locate the wireless security settings and add security as necessary.

How To Reset Your Router's Password
http://www.lostintechnology.com/how-to/how-to-reset-your-routers-password

Jan 06, 2014 | PC Desktops

1 Answer

Trying to hook up a linksys wireless-g 2.4 ghz to a dsl modem for wireless how do i do that


Connect the DSL modem with a LAN cable to the WAN port on the Linksys wireless router. If you have not already configured the Linksys wireless settings, this is the next step.
To configure the wireless router and prevent unauthorized access to your wireless network, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security

Oct 28, 2010 | PC Desktops

1 Answer

Adding Dell Dimension 4600 to existing wireless network?...


Go to Staples and purchase a Linksys USB wireless-G (only G needed - the new "N" protocol is overkill) adapter (~$60.00). Insert the Linksys CD and follow the instructions. When prompted, plug the USB adapter into the Dell (frt or back) doesn't matter. If his "roomies" have security enabled on their router, you'll need to know the level, password/passphrase, and the network name that they assigned.
Good luck.

gurutim

Mar 21, 2009 | Dell Dimension 4600 PC Desktop

1 Answer

Dell Dimension DE051:Wireless Internet Problem (Can't Load Sites)


contact Comcast and have them reset your IP address. also have them ping your modem after they reset IP.
Also, see Linksys website for LELA (easylink advisor) to add devices to network. Uses a good bit of memory so don't allow to run automatically at start up.

Dec 30, 2008 | Dell Dimension 5100 (D51L1) PC Desktop

1 Answer

Downloaded WUSB54GSC and cannot connect to the internet


Need more info, like are you trying to use thw Windows Wireless Connection Wizard or The Linksys one. By default if you installed the software from linksys and not just a driver the the Linksys Wireless Access Wizard should be enables and you will have to use it. I personnally would disable the Linksys Wizard and use the Windows version. You usually can do this by right clicking on the icon for the Linksys wizard and selecting Use Windows... After doing that you should be able to right click on the wireless connection icon, select VIew Available Wireless Networks, select the desired network, then click on connect. The Link below may also help.

http://www1.umn.edu/adcs/network/wirelessxp.html

Nov 15, 2008 | PC Desktops

1 Answer

I HAVE A DELL COMPUTER, AND A LYNKSYS MODEM AND ROUTER. I HAVE TRYED SEVERAL TIMES TO GET THE ROUTER TO WORK SO I CAN USE MY IBM T40 LAPTOP, WIRELESSLY. EACH TIME MY INTERNET ACCESS ON THE DELL IS TURNED...


sounds to me like u r running the dell in the usb, and it has to be on for the ibm to work, or you have a dual ip addressing problem, which is a negative to the ibm when the dell is off.

My son has a IBM think pad as well, and when he uses the Ibm with his linksys wireless router he has the same problem, or did until I addressed the dual ip address issue, which I had to change the Ip address on our netgear, and left his as was and changed the one from My Dell inspiron 8600, I suggest you go to the linksys web site and follow the re install of new drivers for your router and if possible upgrade. they have available w wireless handing software program available to linksys customers as a trial you can download called NETMAGIC which also works quite well, and your able to monitor your network and it usually works well, I've used it until I upgraded to my netgear wireless G router.
hope this info helps you out.

Jun 12, 2008 | PC Desktops

1 Answer

Replaced Linksys Wireless-B 2.4GHz 807.11b Router and Wireless B 2.4GHz 802.11b Wireless-B Notebook Adapter with Linksys-N Ultra Range Plus Wireless-N Gigabit Router, and Wireless N Ultra Range plus Dual...


Try resetting your IP address:
The laptop may be trying to use the IP address from the old router.

1) Click Start (assuming Windows 2000, XP, or Vista)
2) Click Run
3) Type in CMD
This will take you to a black command box
4) Type in: ipconfig/release
The chart should show your IP address as 0.0.0.0
Once this has happened, proceed to step 5
5) Type in: ipconfig/renew
You should now see a new IP address listed.

Also note that you need to set up your network key (assuming that you are using one) on both the router and laptop.
Make sure that your router is set up to perform as DHCP server.

FW

Apr 30, 2008 | PC Desktops

1 Answer

What are the step for setting up you computers to a network using a Linksys router. I have a 2 PC's and a laptop that I would linke to net work together. My first computer is connect to the Wireless-B...


Hi Ed, if your using windows you can open network connections & run network setup wizard. Follow the instruction for a home network for the wireless PC's & notebooks. Once the network is setup for all PC's than you can install the printer cd software in the PC's that you want to access the printer. Each PC & notebook will have access to the printer through the network.
The PC that that is connected to the printer needs to be shared.
Open printers and Faxes. Right click once on the printer & left click sharing. Agai follow the instructions.
Lastly,I strongly suggest you setup security for your wireless. If you do not anyone close can tap into your network connection. Follow linksys instruction to setup security. If you run into a problem you can call linksys for free advise from a pro. Their number is listed in the manual.
http://www.linksys.com/servlet/Satellite?c=L_CASupport_C1&childpagename=US%2FLayout&cid=1175238819816&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=1981627773H10

Good Luck! Take your time.
Have more questions, feel free to ask.
Mike

Apr 04, 2008 | PC Desktops

2 Answers

One computer on network can't open internet pages


Try resetting the modem. It may be the Modem has to re-assign an appropriate ip address to your desktop.

Apr 01, 2008 | PC Desktops

1 Answer

I just installed my siemens se567 wireless router nd I want to set up a wireless network to another computer using a linksys wireless usb network card. What must I do?


Hi tbopper, install linksys software. Follow the instruction. Disable your anti virus / firewall software. (temporally). Make sure the PC with the wireless card is turned on.
Than open My Network connections & run windows Set up a home or small office network. Follow windows instructions.
That's it. When you restart your PC your Anti virus software should enable it's self. Check your firewall is also back on, if it's included in your anti virus it will re-inable it's self. Since your running a wireless make sure you enable security & password, other wise anyone with a wireless can tap into your wireless signal slowing your bandwith down.
To test your linksys is correct. Open internet explorer. In the address window type in 192.168.1.1 & press enter. Your settings should show up. Tech support is free with linksys.

Good Luck & Enjoy!

Mike

Mar 31, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

781 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...