Question about GE Profile JP930 Electric Cooktop

2 Answers

Ge profile electric counter top stove

All 4 burners stay on high

Posted by on

  • 2 more comments 
  • Fsperdut May 02, 2008

    show diagram main module ge profile counter cook top

  • Anonymous Sep 12, 2008

    The right front burner is the only one, and it stays on high, but seems even higher. 



  • Anonymous Nov 20, 2008

    The right front burner stays on high even though I put it on low. What do you think the problem is, the switch?

  • neolahl Dec 11, 2008

    My right front large burner stays on high all the time

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I did not receive instructions with my G E Profile cook top Model No. 80030750434). There is a build up on the elements which I am having problems removing. Should the top be scraped while the stove is hot or cold? What is the best cleaning product to use?

Posted on Aug 20, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 975 Answers

Check the MAIN MODULE if this is a flat surface model.

Posted on May 01, 2008

  • GenElec Nov 11, 2010

    How do you get to the main module?

×

3 Suggested Answers

  • 1214 Answers

SOURCE: GE profile performance electric cook

Confirm there is 240 VAC powering the unit (make sure a breaker has not tripped or a fuse blown.).

Did the burners ever produce enough heat?

If yes, then we can look deeper. If no, then the burners may not be adequate for your cooking style. Burners are like light bulbs. A 60 watt bulb will put out more light than a 40 watt bulb. A 100 watt bulb will put out more light than a 60.
Typically, a small burner will provide less cooking heat than a large burner.

Posted on Jan 23, 2009

joboo1
  • 256 Answers

SOURCE: Counter top stove burner won't light

Hi, You asked a very generic question but I will try to give you a good answer. If the pilot is good and you can light the burner with a match, (this checks everything else) then the most common problem would be the burner holes in front of the pilot are clogged. When cool, remove the burner and inspect the holes, any debris needs to be removed, a bent paper clip works really well. Compressed air helps as well. If there is a tube to the pilot make sure it is exactly where it belongs and that it is clean. If the match didn't light the burner or the flames is not all blue like the rest, there is something else wrong and you need to get back to us with a make and model to better help you. Make sure the burner gets seated back on the orifice correctly and best of Luck to you!

Posted on Feb 05, 2009

heatman101
  • 43501 Answers

SOURCE: Electric ignition for one burner on counter top ge

Hi,
Here is a tip that I wrote to help people troubleshoot problems with their cooktops not igniting.

Cooktop Range Stove spark ignition does not work
http://www.fixya.com/support/r5649407-cooktop_range_stove_spark_ignition_not

heatman101

Posted on Aug 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I plug back in the GE stove top burners after unplugging them?


The two leads from the burner fit into a socket in the stove top. It's a bit tricky to get it in just right. If the three metal "legs" on the burner fit snugly into the three slots on the stovetop you did it right.

Aug 26, 2012 | General Electric Ge Stove / Oven / Range...

1 Answer

Stove top gas does not click and spark to light burners


Hi,
Here is a tip that I wrote to give details about why your cooktop will notspark to light the burners..

Cooktop Range Stove spark ignition does not work

heatman101

ncnm

Sep 25, 2010 | GE 30 in. Profile JP938SCSS Electric...

2 Answers

Burner only cooks on high heat.


You need the switch for that burner. The contacts inside are stuck together. You will need to pull the unit and separate the glass from the lower body to access it. To get the right switch you need full model and serial number located on a plate at the bottom of the unit.

Your ability to perform this is dependent on how mechanical you are. The Whole unit must be removed from the counter opening and the base unscrewed from the glass, remove knobs before disassembling. For someone mechanical this is not difficult. De-energize whole unit first.

Once the two pieces are separated the remainder is mechanically easier. Disassemble the box on right containing the switches and replace the correct one. Reverse the process for reassembly. Good Luck

Aug 30, 2009 | GE 30 in. Profile JP350 Electric Cooktop

1 Answer

One of the burners does not work. Is it possible


yes,heating elemnt and the control can be chgd.to chg those pull the unit out and let it sit on the counter.remove all the screws around the stove just below the glass top.once the screws are out u can pull the top up and have access to all the components.make sure to turn the ckt breaker off b4 opening.u dont have to disconnesct the power cord from the wall if it is hard wired.

Aug 09, 2009 | GE Profile JP930 Electric Cooktop

1 Answer

Counter top stove burner won't light


Hi, You asked a very generic question but I will try to give you a good answer. If the pilot is good and you can light the burner with a match, (this checks everything else) then the most common problem would be the burner holes in front of the pilot are clogged. When cool, remove the burner and inspect the holes, any debris needs to be removed, a bent paper clip works really well. Compressed air helps as well. If there is a tube to the pilot make sure it is exactly where it belongs and that it is clean. If the match didn't light the burner or the flames is not all blue like the rest, there is something else wrong and you need to get back to us with a make and model to better help you. Make sure the burner gets seated back on the orifice correctly and best of Luck to you!

Feb 05, 2009 | GE Profile JP930 Electric Cooktop

1 Answer

My electric stove top burner only works on high


This is for the glass top units. well i'm not sure if your problem is with your large or small single burner or the large expandable burner. If it's the large or small single burner replace the burner and if it the expandable also replace the burner. If you have a coil burner replace the infinite switch. Good luck hope this helps you.

Jan 09, 2009 | Jenn-Air JED8430 Electric Cooktop

1 Answer

GE Spectra electric burner always on high


Sounds to me like the RF switch is bad.
Eddie Rentas
Tupper Lake NY

Jun 26, 2008 | Cooktops

2 Answers

Electric stove top


Follow the wire, It should go to a junction box within 4 feet. It may be behind a cabinet. Remove the box cover and unscrew the wire nuts. It usually uses armored wire and this is clamped to the box. Release the clamp . Turn off breaker or remove the 2 fuses first.

Jun 08, 2008 | Cooktops

Not finding what you are looking for?
GE Profile JP930 Electric Cooktop Logo

2,041 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Cooktops Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

meztang
meztang

Level 2 Expert

112 Answers

Are you a GE Cooktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...