Question about Kenmore 22422 Top Load Washer
I washed a load of whites just fine and then I washed a load of colored clothes. I took the colored clothes out of the washer and all of the clothes had little white circles on them from the wash basket. They all look like bleach stains. Could that be possible? Also, my washer leaves rust stains on all my clothes. My washer is less then 7 years old. Please please help..Will they replace the washer basket if the paint is chipping on the inside?
I'm sorry but the white spots will be due to bleach. It may be that there was undissolved bleach in the washer after the first load. Maybe some of it came out with the whites and lay in wait in the basket.
I doubt the makers would guarantee anything for 7 years, so no free basket or installation is likely. Seems there is a chip in the enamel and dampness / water from the previous wash days before sits there collecting iron as rust particles.
For the time being you could try rinsing the machine out before the first load. That might prevent the rust marks or reduce them.
Posted on May 04, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Feb 03, 2016 | Washing Machines
1. Iron or manganese in the water supply. • Avoid using chlorine bleach on rust stains. It will make them darker and more obvious. • When iron is dissolved in the water, use granular detergent plus a non-precipitating water conditioner, such as Calgon or Spring Rain*. Better results may be obtained by dissolving detergent and water conditioner in the wash before adding the clothes. Be certain that all clothes are down into the water before starting washer. • If the iron is suspended in the water (it will settle out), attach a rust filter to the faucet and inlet hoses or to the water line. • If iron or manganese stains are a recurring problem, the customer may need a special filter or chemical feeder installed in the home to remove these minerals from the water supply. To remove: Launder with RoVer* Rust Remover Part No. 057961 using the directions below: • Top loading washers: a. Fill the washer with water (no detergent), selecting a temperature suitable for the fabric (hot or warm). b. Add 1/3 cup RoVer and let it dissolve by agitation. c. Add clothes and allow washer to complete the cycle. d. Follow up with an additional wash with detergent.
Be sure to check the spin basket for rust spots also.
Jan 16, 2011 | Maytag Centennial 3.2 cu. ft. SuperSize...
Jul 30, 2009 | Frigidaire Affinity ATF7000E Front Load...
Jan 18, 2009 | Kenmore 44102 Front Load Washer
Jan 05, 2009 | Frigidaire GLTF2940ES Front Load Washer
Oct 22, 2008 | Washing Machines
Aug 21, 2008 | Whirlpool Duet GHW9150P Front Load Washer
Jul 26, 2008 | Kenmore 24032\24036 Top Load Washer
Jul 24, 2007 | Kenmore 22422 Top Load Washer
627 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: