Question about Projection Televisions
You can find the remote control codes for difrent brands of devices from
If none of the codes work then we have two other solutions:
1. Searching For Your Code
If you have tried all of the set-up codes for your brand of equipment ,or your brand is not listed, and you are still not able to get the unit to respond, try the following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when you reach the end of all the codes for this device type.
Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
2. Learn the buttons from the original
Line up your original remote and the head-to-head before completing the following steps.
Now you can repeat steps 3 through 5 to learn other functions onto other keys or press and hold SETUP until the Cinema's red light flashes twice to lock in your new feature. (If the red light does not blink twice, stop and repeat steps through 6).
To test the new feature, press and release the device key in which the new feature was learned followed by the key on which the feature was learned
Posted on May 01, 2008
Tips for a great answer:
Feb 05, 2010 | RCA P52926 52" Rear Projection Television
Jan 21, 2010 | Projection Televisions
Jul 25, 2009 | Projection Televisions
Jan 24, 2009 | RCA D52W19 52" Rear Projection Television
Jul 03, 2008 | RCA Projection Televisions
Jun 29, 2008 | Projection Televisions
Jun 22, 2008 | Projection Televisions
Apr 12, 2008 | Projection Televisions
Dec 08, 2016 | RCA Projection Televisions
102 people viewed this question
Usually answered in minutes!