Question about D-Link DI-604 4-Port Cable/DSL Router (DI-604) Broadband (di-604 (dont quote)) Bridge

1 Answer

Help me Please

I need to check my router to see if i have a firewall up or a port 443, how do i do that? I forgot my user name and password and i think i tried to restart the router but i'm not sure if i did, please help me. I'm trying to get my debit machine to work.

Posted by on

  • Randeen May 01, 2008

    need help

  • Randeen May 01, 2008

    I can't even get to the screen to log in anymore, and i typed 192.168.1.1

    192.168.0.1

    192.168.2.1

    And nothing will work

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

D-Link's default login should be "admin" and the default password "password". Try logging in with that.

Posted on May 01, 2008

  • daveohr May 01, 2008

    Try resetting the router again. Hold the reset button down for 10 seconds and then release. Then try connecting and logging in again.

  • daveohr May 01, 2008

    Double check the IP address of the router also. Go to Network Connections in Control Panel, right-click your LAN or wireless connection and choose status. Click the support tab and look for the Default Gateway's address. That's the IP of your router.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have the wireless -G music bridge (model WMB54G) - I had forgotten the password so I reset it - Now, my computer will not recognize it - any suggestions?


The Linksys Wireless-G Music Bridge (WMB54G) has a web-based setup page that allows the user to customize settings and set up advanced properties.
Step 1:
Open a web browser.

Step 2:
Go to the Address bar and enter your router's IP Address, then press [Enter].

NOTE: The default IP Address of a WMB54G is 192.168.1.210.


NOTE: If the IP address of the WMB54G has been changed, type the WMB54G's new IP address in the Address bar instead.

The WMB54G's IP address can be changed by:

    • Running the WMB54G's setup CD.

    • Changing it on the WMB54G's web-based setup page.

If you forgot the WMB54G's IP address you can:

  • Press the Reset button underneath the antenna for 30 seconds.

NOTE: This procedure will reset the WMB54G to factory defaults. Any settings on the Music Bridge will be erased. The Music Bridge's IP address will be 192.168.1.210and the password will be "admin" after resetting.





Step 3:
A new window will prompt for a User name and Password. Leave the User name field blank, type "admin" in the Password field, then click OK.

NOTE: If the password of the WMB54G has been changed, type the Music Bridge's new password in the Password field instead.

Feb 28, 2011 | Linksys Wireless-G Music Bridge (WMB54G)

1 Answer

How do i get my wpa2 code?


If you want to get password for wireless connection then follow below procedure. Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

Nov 11, 2010 | Siemens SpeedStream 4200 (13A4200001)...

1 Answer

Hi, My d-link dl-604 suddenly stopped working. When I plug it in, only the power led and #4 lights are up. None of the other leds are responding nor the internet is not working as well. Please help. Thanks


The following reset procedure will completely restore the default settings on your D-Linkmag-glass_10x10.gif device including your password. This procedure applies to the DI-514, DI-524, DI-604, DI-614+, DI-624, DI-754, DI-764, DI-774, DI-784, DI-804V, DWL-700AP, DWL-800AP+, DWL-900AP+, DWL-1000AP+, DWL-2000AP, DWL-2100AP, DWL-6000AP, DWL-7000AP, and DWL-7100AP.

Step 1 Locate the reset pinhole on the back of the unit.

Step 2 With the unit powered on, press and hold the Reset button.

Step 3 Hold the Reset button for about 10 seconds.

Step 4 Release the Reset button.

Step 5 The unit will reboot. Allow 20-30 seconds before reconnecting.

Step 6 The device is now at factory defaults.

Note: Do not recycle power during the reset procedure.

The default user name for most D-Link devices is admin and the password is left blank.

Hope this helps! Give me thumbs please!

Aug 23, 2010 | D-Link DI-604 4-Port Cable/DSL Router...

1 Answer

I was helping a friend who has Earthlink DSL (a ZyXel DSL modem) to get her Linksys WRT160N wireless router working with the Earthlink modem. No luck. Earthlink won't help unless you pay $7.95/mo with a...


Hello mcneel,

The router should use the ZyXEL P600 as it's DHPC Server. And review/update the ZyXEL WAN configuration as follows:

• Log on to the ZyXEL P600 browser configuration interface: 192.168.1.1
• Enter username/password: Default is username:admin - password:1234
• Click '+' by Network in the letf-hand panel
• Click WAN
• In the Internet Connection tab, select the following options:
...
Name - (Any Name)
Mode - (Routing)
Encapsulation - PPPoE
User Name - (ISP login username eg. MyName@isp.com)
Password - (ISP Login password)
Service Name - (Leave Blank)
Multiplexing - (LLC)
Virtual Circuit ID
VPI - (Leave Blank: Issued by ISP)
VCI - (Leave Blank: Issued by ISP)
IP Address
Obtain an IP Address Automatically - ([X] Check this option)
Static IP Address - (Not Selected)
IP AddressI - (Leave Blank)
Connection
Nailed-Up Connection - ([X] Check this option)
Connect on Demand Max Idle Timeout sec
...
• Click 'Apply' button
• Close the browser configuration interface page


Finally, this link to the EarthLink DSL FAQ Setup Installation and Configuration page might offer some useful suggestions:
http://www.dslreports.com/faq/earthlink/30_Setup_Installation_and_Configuration

If this solution is helpful please click a thumbs-up rating below.

Have a great day,
martyshaw152

Feb 04, 2010 | Zyxel Prestige 645M (AM408405) Bridge

1 Answer

How do i set up the wireless bridge without a


You need to configure your router.
For that Connect your router to computer with ethernet cable then you can access it with following default link.
http://192.168.0.1
or
http://192.168.1.1
If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it.
Then it ask for user name and password.
Type user as "admin" and password as "admin" or "password" or blank.
Then you can see configuration page of router.
Click on WAN settings and set those settings as your internet service provider settings.
Enable DHCP if you want to get ip from router.
Clickon wireless settings enable wireless then enable WEP Security then add WEP code .It isyour password to connect wi fi.Then save settings and restart router.
Then you can connect your wi fi network with that code.
Let me know if you need further assistance.
Thanks for using FixYa.

Jan 30, 2010 | Linksys Wireless-G Music Bridge (WMB54G)

1 Answer

I need the driver download, i've lost my disk.


Can you please tell me is it a router or Ethernet card. If it's router I think no need the driver. Just connect the router to you PC in default network configuration. and type http://192.168.254.254 and press Enter. put Admin as default admin user name and Admin as default administrative password. then setup the necessary configuration.

For further please be with us.

Good Luck

Nov 30, 2009 | Siemens SpeedStream 4200 (13A4200001)...

1 Answer

Can I schedule access to my network for devices in my household?


log-in to your router page. to log-in to your router page, bring up your web browser and type in the router's ip address in the address bar then hit enter. Type in the username and password.
Click on the Advanced tab. Click on Firewall to the left of the page. set it up. click on apply when you're done.

Apr 20, 2009 | D-Link DI-604 4-Port Cable/DSL Router...

1 Answer

Router not allowing connection to sites


Turn off the router's firewall or allow for exceptions. Most downloads and other software than browsing use additional ports that the firewall is not allowing to pass thru.

Oct 01, 2008 | D-Link DI-604 4-Port Cable/DSL Router...

3 Answers

Password


To expand on Curly's solution: There is a small pinhole on the back of the router near the power connection. To reset the router to all its factory defaults (including resetting the admin password) make sure the router is ON (the power light is on) and, using a paperclip, push the tiny button inside the pinhole for about 10 seconds. Then, when you log into the router, the userid will be admin and there will be NO password. Just hit return. That should do it. I strongly recommend setting a new password immediately.

May 26, 2008 | D-Link DI-604 4-Port Cable/DSL Router...

1 Answer

Port forward


What you have done is fine. "Integer" means that you have to input a number between 1 and 65535 as the public and private port.

D-Link have specified that it must be an integer because some other firewall products from other manufacturers also accept service names such as "ping", "pop3", "ntp", etc.

Mar 12, 2008 | D-Link DI-604 4-Port Cable/DSL Router...

Not finding what you are looking for?

Open Questions:

See all D-Link DI-604 4-Port Cable/DSL Router (DI-604) Questions

D-Link DI-604 4-Port Cable/DSL Router (DI-604) Broadband (di-604 (dont quote)) Bridge Logo

Related Topics:

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Network Bridges Experts

john smith

Level 2 Expert

366 Answers

k24674

Level 3 Expert

7987 Answers

Shawn DuRee

Level 3 Expert

353 Answers

Are you a D-Link Network Bridge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...