Question about MSI Wireless-G RG54G3 Router

1 Answer

Thanks no not gona replace chips lol looks like a new router

Posted by on

  • janey70 May 06, 2008

    cant even find a switch for it to turn on and off lol

  • janey70 May 07, 2008

    have left it unplugged theres no power from it atall weve had this router few years now i dont think i have user manual any more

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 148 Answers

Have you tried a full factory reset and leaving it powered down for a while?
Also has it been dropped or jarred recently? that may cause some connections to come loose to the LED header.

Posted on May 02, 2008

  • Will Kibler
    Will Kibler May 06, 2008

    it doesnt need an on off switch. just try unplugging it for a while. 
    One of the first diagnostic steps for any router or firewall is to reset it, powering down, then to try a factory reset. Check the manual for that specific router for how to reset it. After that please describe the problem In Detail and we can go from there.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello I am trying to to install my new 7550 Netgear router but I cannot access this ip addresses 192.168.254.254. Please help I cannot access this pos lol Thanks Miles


this may be a bit technical ,but stay with me , the address your trying to access is in a different subnet (security reason) the machine your using to access this router has to be in a Ip range of 192.168.254.0
to 192.168.254.253r it will not be able to "see" the device this address is typically used for router config as its not a common used number and so it's unlikely to have any conflicts, however after you config the router , both it and the machines on its network should be set to something in the range of 192.168.1.01 to 192.168.2.254 as this is a more typical range of numbers to use on a small network and should help to eliminate any future config problems as new devices are added in the future

Feb 26, 2016 | NetGear Routers

1 Answer

I put my user name and password and can not get it working, shows error401


Configuration corruption inside the router - you will have to reset it and set new ones. If it's the same with the new ones then it's a failed EPROM chip - the chip that stores the settings. In that case the router is dead, replace it.

Dec 25, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

Hello, My roommate and I play World of Warcraft...


I would reset the router to default settings and use the good version of the firmware. OR delete your existing internet setup and then re-add it (do this if you didnt factory default your router before upgrading firmware)

May 20, 2010 | Routers

3 Answers

I need help resetting user name and password


Using your browser, enter http://192.168.0.1 to access the D-Link router management. It may ask for a username and password. If so, use admin in both boxes.

From there, look for the box containing the SSID. It will look familiar as it’s the name you gave the router when you first set it up. That is where you change it.

Next, look in the Security section for the passphrase and you can change it here.

Nov 21, 2009 | D-Link DI 514 Wireless Router (DI-514)

1 Answer

Moved, new internet hook-up, lost IP number


firstly try calling ur ISP provider may be they will help you if not then its a simple rule connect the router to the modem and modem to the system tower or laptop

Aug 24, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

How to port forward


port fowaring for a home network ant gona get u going any faster. sorry to day. if u want faster inter net get a gb ruter

Jan 15, 2009 | Routers

3 Answers

Attaching gigaware antenna kit to linksys wrt54g wireless router


Versions 8.0 and above for this router DO NOT have detachable antenna.
You will NOT be able to detach the antenna on any wrt54g that has a serial number that begins with the following:
CDFF
CDFG
MDF0 CDFJ
A trend with any linksys router model is earlier versions are better (more RAM, linux os, faster chip, detachable antenna, etc), later models are exercises in cost cutting to deliver the 'same' specs on the box.

Aug 21, 2008 | Routers

1 Answer

Netopia 3347W


did you reset or restart if reset all the info has to be re inputted also if you have isp like bellsouth or at&t they will change pass if the router resets i know this from past troubles with mine but after i stopped resetting and just restarted i was fine lol

Mar 21, 2008 | Netopia (3347NWG-ENT) Router (3347NWGENT)

2 Answers

Not able connect to VPN from my new Netgear WGT624v3


Uncheck the "disable SPI firewall" option in the wireless settings for the router.

Aug 20, 2007 | NetGear WGT624 Wireless Router

Not finding what you are looking for?
MSI Wireless-G RG54G3 Router Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top MSI Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Mike

Level 3 Expert

4331 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a MSI Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...