How do I clear Error 6000 in ip 4970 Canon. Start and Resume light blinks.
In the case of your receiving the Error 6000 code from 4970, you must either reset the printer (you've tried that, so forget it), or you must remove paper jammed in the machine (somewhere - this code is not specific as to location, so you have to go through the entire machine, inspecting minutely, and clearing/cleaning out anything found...), or else the machine is 'broken' i.e. in need of a service tech - or, if still under warranty, perhaps an exchange or servicing for minimal or no charge (depending upon specifics of the warranty coverage.) To clear the paper jam, go through the procedures outlined and detailed on http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=105&modelid=15651 (enter removing paper jams in the search box and click Search, then click on the red results link labeled Paper is jammed inside the printer and then click on the red results link that comes up, labeled Removing paper jams MX700. Procedures shown on this page are detailed and well illustrated.) If that (efforts at clearing paper jams) do not clear your error code, your printer will need servicing (and its warranty coverage checked on - you can go to http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=105&modelid=15651 enter warranty check and then click on the Search button, then click on the red results link labeled What is the warranty or (are) service options? to see what the servicing under warranty options are for your Canon printer.) Read more: http://www.justanswer.com/printers-and-office/3h5sa-rid-error-code-6000-canon-mx700.html#ixzz3SBGrZ5QE
Feb 19, 2015 |
Printers & Copiers