Question about PC Desktops

1 Answer

Sony KV36XBR400 turns on for a few seconds then goes out. error code flashes 6 times.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Is the video on the motherboard?

Posted on May 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HP IQ 526 When I press the power button the backlights flash and the power led goes yellow after a few seconds the screen flashes again and the fans restart then it just stays dark, if I hold the power...


Hi Jerry,
Do follow the steps below...
1. Remove the RAM from the motherboard and switch it on. (you'll get 6 continuos beeps) Refix the RAM and check whether it is working or not...
2. Remove the CMOS battery and switch on the PC_ Switch off_Re fix the battery to the slot_Switch on...
3. Disconnect the hard disk from the PC and switch it on...

May 21, 2012 | HP TOUCHSMART IQ526 PC PC Desktop

4 Answers

I have a Sony TV and purchased a RCA remote control new from Walmart (as a replacement for a Sony remote control). The RCA worked fine for 2 months until I accidentally hit the wrong button. The little...


  1. Manually turn ON your device (TV, VCR, Cable Box)
  2. Press and "HOLD" CODE SEARCH
  3. Press and release the device button you want to set up (TV, VCR, Cable Box) However, if you are using AUX for a device, press and release AUX first and then the device button for the type of device to be programmed (TV, VCR, or Cable). The selected device button will flash once.
  4. Release CODE SEARCH.
  5. Press OFF/ON repeatedly until the device turns off (you may have to press up to 100 times at a rate of once per second).
  6. Once the device turns off, press and release ENTER.
  7. With the device on, press any other button. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-6.

Sep 16, 2008 | PC Desktops

2 Answers

Sometimes,,when I open my pc,,there is a blue screen appeared after the windows xp logo and it restarts again after a few seconds..you cannot read the error because it restart fast


Hi,

Follow the steps below to capture the blue screen error code.

1. Turn the computer on.
2. Keep tapping F8.
3. On the Advance Boot Menu, use the arrow keys to select Disable Automatic Restart on System Failure.
4. Press Enter.

The next time that the blue screen shows up, it will be paused and you can get the error code. Let us know what type of error code you are getting and we will be more than happy to help you out.

Thank you for visiting FixYa!

Apr 25, 2011 | PC Desktops

1 Answer

VAIO desktop does not recognize Sandisk flash drive


Most probably you have a drive letter conflict? If so, right click "My computer" choose "Manage" and locate "Disk management" - here, in the middle lower panel, you should be able to find your usb-memory stick, right click it and assign it a drive letter that you're sure is not in use.

Jun 01, 2010 | Sony VAIO PCV-RS720G (027242658103) PC...

1 Answer

My HP will not boot up. When I turn on the power


How many times does it flash. The number of flashes = error code.

Apr 12, 2010 | HP Pavilion a1600n (882780776265) PC...

1 Answer

Sony vaio athlon 2800+ started beeping,one long beep lights flash


listen carefully to the beeps
One Long Beep, One Short Beep= motherboard problems.
One Long Beep, 2 Short Beep= video problems.
One Long Beep, 3 Short Beep= video problems.
Repeated long beeps = memory failure
continious long and short beeps = Cpu overheating

hope this helps

Jan 24, 2009 | PC Desktops

1 Answer

The LCD does goes dark after power on


you mean few second the monitor goes in black. then its come. if it happen, it is ok

Jan 21, 2009 | Sony VAIO® VGC-LS37E PC Desktop

4 Answers

PC won't Boot Up


Here is what is says in the owners manual in what to do in this case, Hope this is a Help, Happy Holidays
Red Power LED
flashes five times,
once every second,
followed by a two
second pause.
5 Pre-video memory
error.
1. Reseat DIMMs. Power on the
system.
2. Replace DIMMs one at a time to
isolate the faulty module.
3. Replace third-party memory with
HP memory.
4. Replace the system board.
Red Power LED
flashes six times,
once every second,
followed by a two
second pause.
6 Pre-video graphics
error.
For systems with a graphics card:
1. Reseat the graphics card. Power on
If you need anymore let me know and I will post them for you.

Dec 15, 2007 | HP Compaq dc5100 PC Desktop

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...