- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Well, eventually I worked it out: The "contacts" are four square fields to the left on on the backside of the cartridge. And it works instantly. (I read somewhere that it needs to be fully transparent tape. The 'blurry' tape leads electricity and doesn't work.)
Hi! here is ...
1.Open your printer i.e. left and right spock.
2.Put your transparent belt between the Cartridge & back board.
3.Each corner there is a small rubble pin.
4.Put your transparent belt any one of the pin.
5.Now put the another one.
6.Remember that let them straight... thanks
You can get transparency foils for either laser or most ink jet printers.
You USUALLY need to make a setting in the printer setup screen for transparency.
Transparencies take more time to dry for the ink jets so do them and don't stack them till dry. Also you have to pay attention to which surface to have the printing on. One side will take the ink, the other it won't dry.