Question about Whirlpool 24 in. GU1500XTLS Stainless Steel Built-in Dishwasher

1 Answer

We have a Whirlpool Gold Quiet Partner IV model#GU1500XTKQ0,the normal wash cycle starts buts just goes into hang mode @ 76min remaining and just continues to wash, is it the control panel or the timer circuit board, all lights seem to work on the control panel

Posted by on

  • mamajoan Oct 14, 2008

    I have the same problem - is this a problem with the water not being hot enough or a timer problem?

  • PMAZ Apr 13, 2009

    Our machine runs 76 min after the cycle finishes we have 2 inches of standing water. Any thoughts?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 3 Answers

I replaced the heater element on mine and that fixed the problem.

Posted on Mar 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool Quiet partner V Dishwasher will not start no lights ,,,nothing


Try unlatched door and hit heated dry, normal, heated dry, normal all within 3 seconds of each ither. Close dior, latch and try again.

Mar 02, 2015 | Whirlpool Gold Series Quiet Partner Iv...

1 Answer

Quiet partner whirlpool III gold reset


TRY A RESET CODE
Press the "Sani Rinse," "Heated Dry," "Sani Rinse" and "Heated Dry" buttons on the dishwasher's electronic control panel in quick succession to put the appliance in diagnostic mode.
Close the dishwasher door and engage the door latch.
Wait 10 seconds before pressing the "Cancel" button to reset the dishwasher.

Dec 18, 2013 | Whirlpool Gold Dishwasher with Quiet...

1 Answer

Whirlpool quiet partner II stops running or won't complete it's was cycle, sometimes is will wash for a few minutes and stop or it will stop before the water even starts to flow.


I had the same problem with my dishwasher. After hearing that the motherboard was the problem I decided to take a closer look. There were two capacitors (1000 microfarads, 6.3 volts) that looked a little suspect. The tops of capacitors should be flat...these looked like soda cans that had been left in the freezer. Got on eBay, located the capacitors for roughly $3 and $4 shipping, for approx total of $10. Soldered the two new capacitors into the motherboard and put it back together. As soon as I closed the door, the dishwasher started draining the water. When I ran a Normal cycle it completed successfully. Saved myself over $120!

Aug 02, 2013 | Whirlpool Gold Dishwasher with Quiet...

1 Answer

The sprayer on the roof inside of my dishwasher does not work. My dishes on the top shelf are stll dirty after a complete cycle wether on normal or pots & pans. I have the whirlpool Gold Quiet Partner...


I'd look at the "spray holes" on the sprayer to ensure no clogs.
Next, ensure tube at the back (if I'm thinking of the correct model) of the top shelf meets with the spout sticking out of the baqck wall of the washer.

Jul 17, 2011 | Whirlpool Dishwashers

1 Answer

Dishwasher takes 3 hours to wash, even on the light cycle


whirlpool Quiet partner 3 the clean light is flashing 7 times what does this mean

Mar 12, 2010 | Whirlpool Dishwashers

1 Answer

I have a whirlpool gold quiet partner iv; will not turn on; the light is blinking between normal and pots and pans cycle. Thanks


it may be a door inter lock or program board failure . need model # to tell you more about it . but it sounds like p c board ., you can try turning of power for 15 min then try it again .. . if this doesnot you may need a tec ..

Nov 22, 2009 | Refrigerators

2 Answers

Wet dishes


Hello
The heat dry button must be lit up or you are using air dry instead!


ican
Please leave a rating before you leave

Dec 10, 2008 | Whirlpool 24 in. GU1500XTLS Stainless...

1 Answer

Whirlpool Quiet Partner II not washing or sensing.


I have a whirlpool quiet partner II and for some reason it does not drain the water out any more and I cannot figure out why....people say that it is the filter but that is unbelievably hard to get to and I cannot find any instructions online or paper work that tells how to break it down. If anyone has any insight please let me know

Nov 16, 2008 | Whirlpool GU2400XTP Built-in Dishwasher

Not finding what you are looking for?
Whirlpool 24 in. GU1500XTLS Stainless Steel Built-in Dishwasher Logo

756 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dishwashers Experts

Mike

Level 3 Expert

4336 Answers

Owen Barnes

Level 3 Expert

867 Answers

yadayada
yadayada

Level 3 Expert

71288 Answers

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...