Question about Audio & Video Receivers

1 Answer

KX-TG5622 System worked fine for 18 months. Three hand sets. Dial tone on all three. All three phones are fully charged. Incoming or outgoing calls are so faint that caller or recipient can hardly hear even when shouting. Help Ralph Baumheckel 317-595-9278 rb-ag-rite@juno.com

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 979 Answers

Bad network card on master base unit. Lightning hit or defective component failure culprit...accordianman

Posted on May 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No display but have sound


HI
Try resetting the system . if this doesn't work.
"Service" is needed .
To clear the AVR's entire system memory including
tuner presets, output level settings, delay
times and speaker configuration data.

1: first put the unit in Standby by pressing the System
Power Control button
2. Next press and hold the Tone Mode button 8 for three seconds.
The unit will turn on automatically.
this will clear all the proccessor.
Note that
once you have cleared the memory in this manner,
it is necessary to re-establish all system configuration
settings and tuner presets.

Good luck
Kind Regards

Apr 19, 2015 | Harman Kardon AVR 235 Receiver

2 Answers

I have connected to my 2311: HDMI 1: Oppo BDP 83 HDMI 2: Denon DVD 1740 HDMI 3: Apple Mac Mini Issue: The Mac Mini works fine and I have audio and video through the receiver, but for the BD and DVD only...


hi,
You have to check the digital audio assignment of you AVR for HDMI 1 and HDMI 2. There is three options for the digital audio for HDMI 1 and HDMI 2. You can set it as optical ,coaxil, or the HDMI itself. In you receiver the assignment may be in optical input or in coaxial input for the two HDMI inputs.

1. Go to the system setup
2. Select input setup
3.Select input assignment.
4. Select all the three input ,you are using as HDMI

ok

Apr 11, 2011 | Denon AVR-2311 Receiver

1 Answer

No sound regardless of input. front panel lights up and functions as per inputs however also noticed pwr supply fan and internal heat sink fan do NOT turn on. Any debugging tips appreciated! Thank You...


The power supply has to be on to some extent or it wouldn't light up.

http://www.retrevo.com/support/Harman-Kardon-AVR-335-Receivers-manual/id/386bh133/t/2/

Does it tune FM? That would indicate some life.

No sound? Is it Muted or a tape Monitor selected inadvertently?

Page 53: Reset the processor...

Processor Reset

In the rare case where the unit's operation or the displays seem abnormal, the cause may involve the erratic

operation of the system's memory or microprocessor.


To correct this problem, first unplug the unit from the AC wall outlet and wait at least three minutes. After the

pause, reconnect the AC power cord and check the unit's operation. If the system still malfunctions, a system

reset may clear the problem.


To clear the AVR 335's entire system memory including tuner presets, output level settings, delay times and

speaker configuration data, press and hold the Tone Mode Button (5) buttons for three seconds. The unit

will turn on automatically.


NOTE: Resetting the processor will erase any configuration settings you have made for speakers, output

levels, surround modes and digital input assignments, as well as the tuner presets. The unit will be returned

to the factory presets, and all settings for these items must be reentered.


If the system is still operating incorrectly, there may have been an electronic discharge or severe AC line

interference that has corrupted the memory or microprocessor.


If these steps do not solve the problem, consult an authorized Harman Kardon service center.

Jan 28, 2011 | Harman Kardon AVR 335 Receiver

2 Answers

HTS6200. I have had for 3 months and all the sudden video will not come thought the HDMI out. Sound works from the speakers and video works when I bypass the ONKYO system. This happened out of nowhere.


Onkyo is having problems with their HDMI. They had a service mod. for it but they still fail. Now they suggest replacing the board (on back order). If yours is only three months old it's still in warranty.

Feb 11, 2010 | Audio & Video Receivers

1 Answer

Worked great for three months... then NO AUDIO through SAT


Your Satellite receiver has been updated with firmware that is "uncompatable" with your version of HDMI. And there is no magic bullet to fix it. The easiest fix is to run your HDMI directly to the TV, then run digital coaxial or optical to your receiver. It is known as a "Handshake" issue in the industry and is the main reason as a professional, I don't use HDMI thru any receiver, still too many issues!

Hope this helps. If you need further help, post a comment and I can help you further.

Sep 19, 2009 | Sony STR-DG820 Receiver

1 Answer

Got a wharfedale NE-3272 DAB/CD Micro system,had it about four months now for my birthday.On friday(about three days ago)it started for no reason to switch itself to stand-by after about three seconds...


I had a similar problem with my wharfedale NE-3272 DAB/CD. Argos replaced it. Now the new one switches itself off when I switch to cd. I think it's one of those that look the part but are really just poorly made tat.

Sep 15, 2009 | Audio & Video Receivers

2 Answers

I've problem getting any Sub sound from Sony STR DB840. The sub is ok and I've correct setting on my reciever with sub enabled. When performing tone test... I can hear sound from all connected speaker...


make sure sub is working .Power it up , remove sub RCA jacks from receiver .Gently tap on RCA with fingers.You should here a hum when touched .You can also try audio from TAPE REC OUT .If you dont get audio .Check setting at sub .If it working okay check setting at receiver and or sub level at receiver

Jul 20, 2009 | Sony STR-DB840 Receiver

1 Answer

I have a Numark TT200 turntable and when unscrewing the tone arm assembly I noticed a broken black lead. The other three were intact (red green and white). How do I fix please?


Turntabletech.com rewire it thats the option or get the TT200 tone arm base its $149 might as well get a new one with that right?

Oct 16, 2008 | Audio & Video Receivers

1 Answer

How do i reset my Pioneer SX 316 Surround Sound System. i lost the owners manual.


1. Switch the reciever into standby.
2. While holding down the TONE button, press and hold the STANDBY/ON button for about three seconds.
3. When you see RESET? appear in the display, press the ENTER button. OK shows in the display.
4. Press SETUP to confirm.
OK appears in the display to indicate that the receiver has been reset to the factory default settings.

Aug 08, 2008 | Pioneer Audio & Video Receivers

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio & Video Receivers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68250 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

Are you an Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...