Phone wont ring? or paging system dosent work

hello,
i want you to go your phone setting, press the menu,scroll to profile, select the profile you are using and personalize it.
however, when personalizing scroll down to ringing type and select the ringing type you want.
if this does not work, open the phone, remove the ringer [the ringer is a small metal touching the panel of the phone, read it with meter, if it does not read, change it and replace it with a good one.

What Avaya phone system do you have?

Press an intercom button and dial the 2 digit extension number. This will ring the extension. To page the extension, press an intercom button and then * (Star) and the 2 digit extension number. This will page the phone.

How do you dial paging? Pressing a button or dialing a code?

THat phone can be on a few different systems, do you know what you have for a phone system?

Each of the modular jacks at the cabinet will accept a single line telephone. I don't think you can "bridge" a phone on 12 year old software, but if there is a spare jack, it will work with a plain old cordless phone. Plug one in, dial 10, and read what extension you have. Here's a manual for a 4.1 Partner system to help you program the ringing. Programming is done from the display phone at extension 10 or 11.

http://public.carl.airpost.net/Avaya/Partner_ACS.pdf

After you find the extension, save yourself the trouble and go to page 447 of the attached pdf. It details how to set the Automatic line preference and ringing of the cordless. The difference is that you will select your lines AFTER the intercom as in ** LIC RIC 1 2 3 4, or 4 3 2 1. This is important! You'll then be able to dial "9" to get an outside line in forward or reverse order and still call internally.

If you find you don't get an outside line when you dial "9", then keep reading the manual, you need to put your lines in groups.

Carl

Press PROGRAM
Press *
Press #
Enter 2 digits (11 through 22)
Press INTERCOM

This should work.

A Partner is a pretty simple system and the phones are probably all in a single calling group. Your extensions are numbered from 10 to whatever, so at the least you can grab a phone, press the intercom button and dial 0 or 10. It will ring the main phone.

From there, you can start dialing 11,12,13 etc and build your directory. IIRC pressing * in front of the number turns it into a handsfree call. Now, here's where you get to see what kind of installation you have :-) Press intercom and dial *71. With luck, every idle phone will have paging. (71 will ring every phone btw).
This does require programming and an extension can be either in or out of a group.

I do have a basic Partner ACS manual on my website. http://www.public.carl.airpost.net/Partner_ACS.pdf

The display phone users manual in in the document. Page 179 starts chapter 6, a 30 page guide to the phones.

Carl

Feature 00
LEFT Intercom twice
#209
enter the line number (01, 02, 03, 04, etc)
Press the Keypad for the ring style you want (1-8)

Feature 00 when done.

If this does not work, your release of Partner system is too old....

how can i change the ring tone on this phone

See

this page on Fixya.com

for the online user manual and guide.

)You'll need to read the 'RING SELECT/TOLL SAVER' section on the left side of the page.)

Good Luck