Question about Epson ACULASER CX11NF All-In-One Printer

1 Answer

Epson cx11n major printing problems

Hi,

My output has major striations of all colors running the legth of the paper, about 3 in. wide in the middle of paper. Just started after I replaced several toner cartridges. I have cleaned the print lense, pulled and replaced the pcu (at end of its life), and uninstalled and reinstalled the toners. When the pcu (photo conductor unit) was out I noticed discoloration about where the striations occur. I was wondering if replacing the pcu should fix this. I also noticed my toner levels are dropping very fast. Ones I replaced last week are showing 1/4 full now.

Also someone mentioned to empty the waste toner. How do you do this on this machine. Nothing in manual about that.

TIA

Posted by on

  • AmyMaclean May 08, 2008

    I am having a similar problem and can't seem to fix it. Any thoughts?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Epson Master
  • 691 Answers

Replace the PCU

Posted on May 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Every picture I print has striations through them. My pictures all look like they have been printed on corduroy paper. I am using an HP deskjet 940c. Any ideas?


Hi

The printhead of your color cartridge is clogged
or is near to end
you need to replace the color cartridge or refill it (cheaper method)
check here how

Jan 19, 2011 | HP DeskJet 940c InkJet Printer

1 Answer

Epson Aculaser CX11N /11NF. Paper jam error will...


this could be due to the sensor at behind of the printer.. you should be able to see it once you open cover E.. it's very delicate plastic and normally when you clear the paper , you might accidently damage it.. you will need to open the read feed assy to fix it.. 4 screws and you should be able to remove it.. but first remove the E cover but slightly forcing the lower left hidge.. use a test pen...

May 20, 2010 | Office Equipment & Supplies

2 Answers

I have a new photoconductor unit in my epson CX11N aculaser printer and now it is printing anything in colour with a white stripe down the left hand side about 4cm in


Hi

Try taking out all toners and reinstall them. Turn on unit, without Photoconductor, wait till you get error install photoconductor. Insert photoconductor and try printing again.

Hope this helps

Mar 26, 2010 | Epson AcuLaser CX11N All-In-One Printer

1 Answer

No ink output from Epson Stylus Color 777


I don't have an answer for you but I have the exact same problem.

I have an Epson Stylus Color 777 and I put in new cartridges (black and color) that I bought yesterday (03/05/10).

I pulled the tape off the cartridges and inserted them in their carriages. Everything works like usual except that no ink at all prints on the page. Comes out completely blank.

Nov 11, 2009 | Epson Stylus Color 777 InkJet Printer

2 Answers

Light print on right side of page


from what you are saying, if color is fine and black is not, its most likely the black drum that is the problem. the toner is part of it. try taking the black toner out and shaking it, and putting it back in, if it still does not help, most likely it is the toner/drum.

thanks adi

May 05, 2009 | Epson AcuLaser CX11N All-In-One Printer

1 Answer

Epson Stylus CX5000 blurry or smudged printing


epson uses pigmented ink and compatibles use dyes and thus if the paper is not of good quality then you can have this problem.

do the following

change the paper and try.

As there will be ink in the head and the ink feed tubes , print some 10 -15 copies of all color prints so that the original ink starts to get into the head and then the paper.

this should solve your problem

Also use your printer every 2 -3 days if you dont have any prints then give a noozle check and then switch off the printer. This will avoid the printer from doing a head clean very time you switch on the printer and also the ink will give you more output as there is less amount of head cleaning

bye

Aug 09, 2008 | Epson Stylus CX5000 InkJet Photo Printer

1 Answer

Full colour page print has faded lines printed through the work


I have ordered a new photocunductor unit as i am assuming that the other one was faulty.

Jul 07, 2008 | Epson AcuLaser CX11N All-In-One Printer

3 Answers

Epson R2400 too red


i think you have a corrupted driver- you have to uninstall driver first

1. Double click on the MAC HARD DRIVE.
2. Double click on the LIBRARY folder.
3. Double click on the PRINTERS folder.
4. Drag the EPSON folder to the trash can.

Go to print and fax and delete the printer name as well

Restart the Mac. (You do not need to empty the trash.)
If you have not done so already, please follow the steps below to download the latest driver for your printer in OSX:

1. Go to the following website: http://support.epson.com
2. Under the PRINTERS heading select INK JETS and then the Stylus Photo R2400.
3. Under the DRIVERS & DOWNLOADS section select MACINTOSH.
4. Select and download the following file for your operating system

which mac are you using? tiger ot leopard? intel core or powerpc?



May 15, 2008 | Epson Stylus Photo R2400 InkJet Printer

2 Answers

Printer Feed Problems


paper too thin 80gsm is too thin..try100. hope it solves your problem...did mine cheers derek

Mar 27, 2007 | Epson Stylus Color 1160 InkJet Printer

Not finding what you are looking for?
Epson ACULASER CX11NF All-In-One Printer Logo

336 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Cindy Wells

Level 3 Expert

4950 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...