Question about Computers & Internet

2 Answers

I cannot get the Page Header - OnFormat feature to fire

Posted by on

  • iohara Apr 30, 2008

    No - I'm talking about MS Access.

  • iohara Apr 30, 2008

    This doesn't really resolve my issue. I already have a Page Header defined and have the On Format set up with an "[Event Procedure]" -



    In the Event Procedure - all I am doing is displaying a MsgBox. This is not displaying.



    My guess is that something has changed in Access 07 that requires another field to be set somewhere - it just isn't intuitive.



    I have tried many Event Procedures for many different sections and none of them seem to be firing...



    If you know how to make the Event Procedure fire for the On Format event in the Page Header - I would be very appreciative of your help.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 652 Answers

Hello Friend,
This is Iqbal we had a chat session on yesterday. I was hurted badly after veiwing your comment, that i "was put you on circle", I am sorry for that.
Anyways I have tried and I feel very much pleasure that it works.
What I did see: I have marked the option I have selected with red circle/regtangle.
Open The Access 2007
I cannot get the Page - 563db35.gif Choose Local Template -> Students
Then a blank screen appeared.
d6a6e0b.gif
Then click on Navigator Pan (if it closed)
9bcbf4b.gif
Then Select "All Students" reI cannot get the Page - b6310c7.gifimg src="http://i.fixya.net/uploads/images/b6310c7.gif" alt="b6310c7.gif" class="h_mi" /> Then Selec Page Header and thI cannot get the Page - a224b4e.gift button in Event
a224b4e.gif 904757a.gif

Select MaI cannot get the Page - d7f60f5.gif and Clicked on Ok button.
Then select MsgBox in Action List
d7f60f5.gif
Then save macro dialog appeared.
07b255c.gif
As well as I save the event fires First Time. (As it executed).
11d8I cannot get the Page - 7d94572.gifass=

Thats all the stuffs which we needed to do.
Now Goto View and SeI cannot get the Page - f59eb6f.gifew' (To execute the Report).
7d94572.gif Then Event will be fired two times.
f59eb6f.gif
Feel free to mail me at iqbal_delhpidev@yahoo.com

Thanks
Friend I think it will help you.
Please post your feed-back.
Thanks again
Iqbal

Posted on May 01, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 1,342 Answers

Are you talking about MS Word? Click on View, Header & Footer.

Posted on Apr 30, 2008

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to connect the power led,power sw,hdd led on e-machine t2240


Apologizes your question hasn't received a solution until now. I have been 'away from my desk' for a while.

The eMachines T2240 desktop pc uses an Intel D845GVSR motherboard.
So let's go to Intel Support for more information, and to the specific product download page for the Intel D845GVSR motherboard,

Intel Desktop Board D845GVSR Product Guides


On this page left-click right on the blue title -
Intel Desktop Board D845GVSR Product Guide (PDF)

This is a PDF file. The computer you are using has Adobe Reader on it which uses PDF files.
After you have downloaded the PDF file go to the top left and hover your mouse cursor on the rectangular icon. (To the left of the Up/Down arrows and Page: )

Hovering your mouse cursor over this icon will briefly reveal -
Toggle Sidebar. Click on this icon.
Now click on the icon to the immediate right of it. (Show Document Outline)

Scroll the Show Document Outline sidebar down until you see the heading - Connecting Internal Headers -
Now click on the heading immediately underneath it -
Connecting the- Front Panel Header -

[The front of your computer is the Front Panel. The area of connecting pins on the motherboard for the Front Panel is the Front Panel Header ]

On Page 11 in the Product Guide we see that S designates the Front Panel Header.
On Page 31 in the Product Guide it shows the Front Panel Header pinout. (The Front Panel Header is designated by C in the illustration)
Again on Page 32, it shows where the Front Panel cables connect to.

In case you are not able to view the Product Guide;

Viewing the motherboard installed in the computer case, the Front Panel Header lays parallel to the bottom of the motherboard, at the Bottom Right.

It is rectangular in shape and has 9 pins.
4 pins along the Top, and 5 pins along the Bottom.

The pins are numbered Even along the Top row;
Starting from the Left side of the Front Panel Header going to the right;
Pins 2, 4, 6,and 8. There is NO Pin 10.

The pins are numbered Odd along the Bottom row;
Starting from the Left going to the right;
Pins 1, 3, 5, 7, and 9.

A) Pins 1 and 3 are for the Harddrive Activity LED.
Pin 1 is for the Positive ( + ) wire. Pin 3 for the Ground wire.
In case the HDD LED is dim when the HarDDrive is active, switch the wires around. (Computer off and Anti-Static Precautions used)

B) Pins 5 and 7 are for the Reset switch, IF a Reset switch is used.
Pin 5 is for the Ground wire.

C) Pin 9 is for 5 volt ( + ) power. Not Used.
(Usually the motherboard manufacturer uses this pin to test the motherboard)

D) Pins 2 and 4 are for the Power On LED.
-> Believe Pin 2 is for the Positive ( + ) wire.
If PWR LED is dim when computer is on, switch the wires around.

E) Pins 6 and 8 are for the Power On switch.

There is No Pin 10.

For additional questions please post in a Comment.

Regards,
joecoolvette


May 13, 2014 | E-Machines Computers & Internet

1 Answer

Motherboard power wiring


The eMachines W3653 (a?) uses an ECS 945GCT-M3 motherboard,

http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?CategoryID=1&DetailID=719&MenuID=1&LanID=0

(Photo is J-U-N-K. Go to More pictures, and click on it.
{More pictures / Where to buy / Print}

Click on Download.
(Features / Specification / Download / Support / CPU / etc)

Click on MANUAL
(Driver / BIOS / MANUAL)

To the right of Download, click on the country NAME nearest yours.

This is a PDF file. The computer you are using now has Adobe Reader on it, which uses PDF files.

After you click on the country name, it may take up to 30 seconds, before the first page comes up. Took 5 seconds just now for me, using a medium speed DSL connection.

Hover your mouse cursor towards the Bottom/Middle.
The ghosted out navigation guide will appear.
Go to the far Right, and click on the Adobe Reader Toolbar icon.

(If you hover your mouse cursor over it, Show Adobe Reader toolbar, will briefly appear)

The Zoom Out icon at the top ( - ) decreases the view size.
The Zoom In icon at the top ( + ) increases the view size.

The Adobe Reader page number box is at the Top, and to the right of the Down Arrow.
The Adobe Reader page numbers, and the actual manual page numbers; do NOT match each other.
When I refer to a page it is for the Adobe Reader page number box.

You can use the Down Arrow to go page by page, to arrive at the page you want; or you can do this;

1) Left-click IN the Adobe Reader page number box.
Everything inside the box will be highlighted in Blue.

2) Type the page number you want.
3) Press the Enter key.

Go to Page 11. Increase the view size.
This is the Motherboard Layout.
Number 12 points to the Front Panel header.
(PANEL1)

[The front of your computer is the Front Panel.
The area of contact pins on the motherboard, that the main wires from the Front Panel go to, is the Front Panel header.

What you are asking for is the Front panel header pinout ]

Motherboard installed in computer; the Processor is to the Top, Ram Memory slots to the Right, white long PCI slots (2) to the Bottom;

The Front Panel header is at the BOTTOM/RIGHT corner.
Two rows of contact pins.
It is IN a long black rectangular strip, that also contains OTHER contact pins.

Starting on the LEFT side of this long black header, going towards the Right; you want the LAST 4 pins on the Top row. (There are 4 pins, then NO pin)
You want the LAST 5 pins on the Bottom row.

The Front Panel header pinout is on Page 33.
The Top row of pins are numbered EVEN.
The Bottom row of pins are numbered ODD.

Starting on the LEFT side going towards the Right, Top row;
Pins 2, 4, 6, and 8. There is NO pin 10.

Starting on the Left side going towards the Right, Bottom row;
Pins 1, 3, 5, 7, and 9.

A) Pins 1 and 3 are for the HarDDrive activity LED. (Light)
(LED = Light Emitting Diode)

Pin 1 is for the Positive ( + ) wire.
If the HDD LED is dim when the harddrive is active, switch the wires around.

B) Pins 5 and 7 are for a Reset switch, IF a Reset switch is used.

C) Pin 9 is N/C.
Not Connected.
It is probably a 5 Volt test point for the factory to use.

D) Pins 2 and 4 are for the Power On LED. (Light)
Pin 2 is for the Positive ( + ) wire.
If the PWR LED is dim when the computer is on, switch the wires around.

E) Pins 6 and 8 are for the Power On switch.

F) There is NO pin 10.

For additional questions please post in a Comment.
Regards,
joecoolvette

Nov 16, 2012 | Computers & Internet

1 Answer

Where does the power led wire go on the motherboard


For an eMachines T5224 Desktop PC?

The eMachines T5224 Desktop PC uses an Intel 945GCL motherboard,

http://www.ebay.com/itm/Intel-D945GCL-AA-D67193-203-Socket-775-MOTHERBOARD-/130713275248?pt=AU_Components&hash=item1e6f1e4b70

(Not advertising for the seller, or the website. Just posted for reference)

Motherboard Manual:

Intel Support > Intel D945GCL motherboard > Main Support page,

http://www.intel.com/p/en_US/support/highlights/dsktpboards/d945gcl

Go down to the subheading - Documents and Guides. (And -> is an Ampersand)
In the list under this subheading click on - Product guides

On this page click on the blue -
Intel Desktop Board D945GCL Product Guide - English (PDF)

This is a PDF file. The computer you are using now has Adobe Reader on it, which uses PDF files.
After you click on the above file name it may take up to 30 seconds, before the first page comes up.

[Took 10 seconds just now, using a medium speed DSL connection ]

The PDF file page number box is in the Top header, and is to the right of the Down Arrow.
The Zoom In icon ( + ) increases the view size, when you click on it.
The Zoom Out icon ( - ) decreases the view size.

IF you know the page number you want, you can use the Down Arrow to go page, by page to it, Or;

1) Put your mouse cursor in the page number box. Left-click once.
Anything in the page number box is now highlighted in blue.

2) Type the page number you want.
3) Press the Enter key.

Go to Page 11.
Shows an illustration of the motherboard. The view shown is actually 90 degrees to the right, in comparison to how it actually sits in the computer case.

[In the computer case; the Processor is to the Top, Ram memory slots to the Right, and long white PCI slots are to the Bottom ]

The front of your computer is the Front Panel.
The area of contact pins on the motherboard, that the main wires from the Front Panel go to, is the Front Panel header.
It may have F_PANEL, or FP1, or the equivalent, silkscreened on the motherboard next to it.

In the illustration on Page 11 the letter V, points to the Front Panel header.
Motherboard mounted in your computer case, the Front Panel header is at the Bottom/Right corner.

Two rows of pins, and the area around them is color coded, for where the wires are supposed to attach to, from the Front Panel.

Go to Page 43.

Looking at the Front Panel header, there are two rows of pins. (Already stated, I know)
The TOP row is numbered ODD.

Starting at the RIGHT side of the header, (Or motherboard), and going towards the LEFT side;
Pins 1, 3, 5, 7, and 9.

The BOTTOM row is numbered EVEN.

Starting at the RIGHT side of the header, going towards the LEFT side;
Pins 2, 4, 6, and 8. There is NO pin 10. Just a blank spot.

A) Pins 1 and 3 are for the HarDDrive activity LED (Light)
Pin 1 is for the Positive ( + ) wire.
IF the HDD activity LED light is dim when the Harddrive is active, switch the two wires around.

B) Pins 5 and 7 are for the Reset switch, IF a Reset switch is used.

C) Pin 9 is N/C. Not Connected. It is/was used for the factory.

D) Pins 2 and 4 are for the Power On LED (Light)

E) Pins 6 and 8 are for the Power On switch.

There is no Pin 10.

For additional questions please post in a Comment.
Regards,
joecoolvette

Jul 02, 2012 | eMachines T5224 PC Desktop

1 Answer

T5244 motherboard diagram?


I am not aware that there is an eMachines T5244 Desktop PC.
Do you mean T5224?

Going with the model number T5244,..........

The eMachines T5224 Desktop PC uses an Intel D945GCL motherboard.

Installed in your computer case with the Processor to the top, Ram memory slots (2) to the right, black PCI-Express x16 slot and white PCI slots (3) to the bottom, it looks like this,

http://www.ebay.com/itm/INTEL-D945GCL-SOCKET-LGA-775-mATX-MOTHERBOARD-945G-ICH7-/370485278057?pt=Motherboards&hash=item5642a4b569

The plastic Front of the computer case is the Front Panel.

The area of contact pins on the motherboard, that the Power On button, (Switch), Power On LED light, and Harddrive activity LED light, wires connect to, is the Front Panel header. (May be abbreviated on motherboard as FP1, or F_PANEL1 )

The Front Panel header, is at the bottom Right corner of the motherboard.

This is Intel Support > Intel D945GCL motherboard > Product Guide download page, (Motherboard Manual),

http://www.intel.com/support/motherboards/desktop/d945gcl/sb/CS-023154.htm

Click on the first file listed in blue -
Intel Desktop Board D945GCL Product Guide - English (PDF)

This is a PDF file. The computer you are using now has Adobe Reader on it, which uses PDF files.
After you click on the file name it may take up to 30 seconds before the first page comes up.

If you are aware of the following disregard;
The page number for the PDF file, does not always correspond to the page number of the manual, with most PDF files.
This particular PDF file does.

The page number box is in the top header, to the Right of the Down Arrow.
You can use the Down Arrow, (Or Up Arrow when needed), to arrive at the desired page, or;

1) Put your mouse cursor in the page number box. Left-click once. (Number/s in page number box are then highlighted in blue)

2) Type the desired page number
3) Press the Enter key

The view size can be changed with the Zoom In/Zoom Out icons, in the top header of the PDF file.
Zoom In ( + ) increases the view, Zoom Out ( - ) decreases the view.
( I use 75 to 100 percent, normally)

To go on;
For the Front Panel header pinout, start on Page 11 looking at the Top View of the motherboard.

The letter V points to the Front Panel header.
(View of motherboard is turned 90 degrees to the right, in comparison to how it is actually sitting in your computer case )

Looking at the Front Panel header, to how it is actually sitting in your computer case, the Front Panel header is a rectangular header with two rows of contact pins.

Go to Page 43.
5 pins across the Top, 4 pins across the Bottom.
The pins are numbered.
Numbered Odd for the pins going across the Top, and Even for the pins going across the Bottom.

Starting at the RIGHT side of the Front Panel header, (Right side of motherboard), and going towards the Left side on the Top row, the pins are numbered,

1, 3, 5, 7, and 9

Starting at the Right side of the Front Panel header, and going towards the Left side on the Bottom row, the pins are numbered,

2, 4, 6, and 8

A) Pins 1 and 3 are for the HarDDrive Activity LED light.
Pin 1 is for the Positive ( + ) wire.
If the HDD LED light is dim when operating, switch the wires around.

B) Pins 5 and 7 are for a Reset switch, IF a Reset switch is used.

C) Pin 9 is N/C. No Connection

D) Pins 2 and 4 are for the Power On LED light.
Pin 2 is for the Positive wire.
If the Power On LED light is dim, switch the wires around.

{ NOTE**
The Power On LED light may not use the Front Panel header.
It may use the small rectangular header, above the Front Panel header.

This alternate Power On LED header has 3 pins.
Pin 1 is all the way to the Right. (Pin 3 all the way to the left, Pin 2 in the middle)

Ordinarily if a Power On LED light just has one color, it is attached to the Front Panel header.
It CAN be attached to the alternate header, however. It is attached to Pins 1 and 3.

Pin 1 being the Positive connection ( + ), Pin 3 being the Negative ( - ) connection.

Some computer models used Turbo Mode. Supposedly kicking the computer up to a faster speed.
These model's Power On LED light had dual colors.

Example Green for ordinary mode, and Yellow for Turbo Mode.
Pins 1 and 2 are used for the Positive connections. (Green and Yellow, for example). Pin 3 is used for the Negative connection.

Side Note*
The computers did not essentially go to a faster speed.
When in non-turbo mode, the computer is operating at less than it's full capability. ('Speed')
When in Turbo Mode the computer is operating at it's normal capability.
There was NO increase in power, in reality }



E) Pins 6 and 8 are for the Power On switch.

[ NOTE*
BEFORE reaching inside your computer, observe Anti-Static Precautions, and have the power Unplugged to computer.

Anti-Static Precautions:
Your body carries Static electricity. Static WILL fry out (Short Circuit) the delicate hardware components inside a computer.

De-Static your body before working on the computer. (And occasionally during doesn't hurt)
Computer on a table, computer unplugged from power, computer case open.

TOUCH an unpainted surface, of the metal frame of the open computer case.

This action will relieve your body of Static.
Should you leave your computer in the middle of working on it, be SURE to Touch the metal frame again, upon your return ]

Power Supply cable connections: (Page 48)
1) The 24-pin ATX main power cable connects to the motherboard, to the white connector on the motherboard with 24 socket holes. It is to the right of the Ram Memory slots.

The male connector of the power cable, has a Lock on the side. The female connector on the motherboard, has a Notch for the Lock.
The Lock operates in the same fashion as a see-saw on a playground.

The top of the Lock is gently squeezed in, and this brings the hooked end of it, away from the Notch on the female motherboard connector.
When this Lock is firmly hooked into place, then it is known that the power cable is plugged in securely, and correctly.

Example of a 24-pin ATX main power cable, and it's respective connector on the motherboard,

http://www.playtool.com/pages/psuconnectors/connectors.html#atxmain24

2) Same for the 4-pin ATX +12 Volt power cable. It has a Lock also.
This power cable provides power for the Processor. (CPU)

This power cable, plugs into the whitish square connector with 4 socket holes, to the Left of the Processor. (It is next to the purple 25 pin Printer connector)

Example of a 4-pin ATX +12 Volt power cable,

http://www.playtool.com/pages/psuconnectors/connectors.html#atx12v4

Note the two Yellow 12 volt wires, and the two Black ground wires, in the cable.

3) One SATA power cable to the Harddrive.
(At least according to eMachines Support. Support doesn't state whether the optical drive { DVD-R/W} is an IDE unit, or SATA )

Long 15-pin connector with L-shape connection.
(The shorter 7-pin connector is the DATA cable. It also has a L-shape connection)

4) 4-pin standard Peripheral power cable/s.
(Also misnomered as a 'Molex' power cable)
If you have an IDE (PATA) harddrive, this is a power cable for it.
IDE (PATA) optical drives also use this power cable.

The computer case (Chassis) fan attaches to the small white 3-pin header, next to the round CMOS battery.

How to find out which wires are the Power On switch, Power On LED, and Harddrive activity LED wires?
You may have to remove the Front Panel, and follow the wires.

It is simple to trace the wires to the Power On switch, and Harddrive activity LED light. The Power On LED wires are then found.

For additional questions please post in a Comment.

Regards,
joecoolvette

Dec 04, 2011 | E-Machines eMachines Desktop PC

1 Answer

How do i hook up usb button in intel 845 motherboard


Well, that's a start. You know you have an Intel motherboard in your eMachines, that uses an Intel 845 motherboard chipset.

It is an Intel D845GVSR motherboard.

http://www.intel.com/support/motherboards/desktop/d845gvsr/sb/cs-008823.htm

Left-click on the blue -
Intel Desktop Board D845GVSR Product Guide (PDF)

This is a PDF file. The computer you are using now has Adobe Reader on it, which uses PDF files.
(I would advise upgrading to Adobe Reader X { 10 }, however, if you don't have it )

After you click on the above link, it may take up to 30 seconds before the first page comes up. (Took 6 seconds just now. Adobe Reader X, and medium speed DSL connection)

At the top of the PDF file, is the PDF file page number box.
It is to the left of the Down Arrow.
Go to Page 11.
T is the Front Panel USB header.

This is where the USB ports on the front of the computer, (Front Panel) connect to.

Go to Page 31.
E is the Front Panel USB header.
The Front Panel USB header is J9F2.

Observe the numbers next to the pins.
Go to Page 33.
This is the pinout for the Front Panel USB header, using those contact pin numbers.

1, 3, 5, 7, and 9 = one USB port
2, 4, 6, 8, and 10 = one USB port

Notice pins 9 and 10 are not used.

You can connect two USB ports to this header.

The pinout of ANY USB connector, female, or male, is set to a Standard.

This is the standard pinout for USB connectors,

http://pinouts.ru/Slots/USB_pinout.shtml

In case you cannot download the Intel D845GVSR motherboard manual;

Looking at the motherboard in it's normal position, installed into the computer case, the USB header is on the Bottom edge of the motherboard.

It is to the immediate Right, of the bottom white PCI slot (PCI 3)
It is to the Left of the motherboard mounting hole.
It is Below the Intel 82801DB, Southbridge chip.

Two rows of pins.
5 across the Top row, 4 across the Bottom row.

STARTING on the Left side, (Towards the white PCI slot), and going towards the Right, the pins on Top are numbered,
Pins 2, 4, 6, 8, and 10

STARTING on the Left side, (Towards the white PCI slot), and going towards the Right, the pins on Bottom are numbered,
Pins 1, 3, 5, and 7

Pins 1, 3, 5, and 7 = One USB connection
Pins 2, 4, 6, and 8 = One USB connection

Pin 9, and Pin 10 are Not used. (N/C. No Connection)

A) Pin 1 is for Power

B) Pin 3 is for D-
The Data, or Signal wire. It is the Negative connection

C) Pin 5 is for D+
The other Data, or Signal wire. It is the Positive connection

D) Pin 7 is for Ground

Going to the other USB header;
A) Pin 2 is for Power

B) Pin 4 is for D-

C) Pin 6 is for D+

D) Pin 8 is for Ground

For additional questions please post in a Comment.

Out of curiosity which eMachines is this?

Regards,
joecoolvette

Nov 24, 2011 | E-Machines eMachines Desktop PC

1 Answer

I took the front off the e machine w2888 desktop but did not notice the three wires was not one plug, what order and colored wire up or down. Their is a pwr led, pwr s/w, hdd led wire. Thanks Jerry


The eMachines W2888 uses an Intel D845GVSR motherboard.

This is the download page for the Intel D845GVSR motherboard manual, (Product Guide),

http://www.intel.com/support/motherboards/desktop/d845gvsr/sb/cs-008823.htm

Left-click on the first file name in blue -
Intel Desktop Board D845GVSR - Product Guide (PDF)

This is a PDF file. The computer you are using has Adobe Reader on it, which uses PDF files.
After you click on the above file name it may take up to 30 seconds before the first page comes up.
It may also take additional time for the file to fully download.

[ Took 4 seconds to see the first page come up, just now. File was fully downloaded ]

At the top of the PDF file is the page number box. It is to the right of the blue Down Arrow.
This is the page number I will be referring to, and may not be the actual page number of the manual.

Go to Page 11.

This shows an illustration of the motherboard looking down at it from the top.
The letter S points to the Front Panel header.

[The plastic front of your computer is the Front Panel.

The area of pins on the motherboard that the cables (Wires) go to from the Front Panel, is the Front Panel header ]

Looking at the motherboard with the Processor to the top, Ram memory slots to the right, and the white PCI slots (3) to the bottom, the Front Panel header is located parallel to the bottom right edge of the motherboard.

(The illustration has the motherboard sitting on it's right side.
Not the direction it is sitting in your computer.
In your computer the motherboard is sitting as described above )

Now I would like you to go to Page 31.
This illustration shows the various internal headers on the motherboard.
The letter C points to the Front Panel header. (J9G1)

Note that the pins in the Front Panel header are labeled with numbers.
(Pinout)

There are 4 pins across the top.
There are 5 pins across the bottom.

Starting from the Left side of the motherboard, going towards the right, across the Top of the Front Panel header;

Pins 2, 4, 6, and 8.

Starting from the Left side of the motherboard, going towards the right, across the Bottom of the Front Panel header;

Pins 1, 3, 5, 7, and 9

Page 32: Front Panel Header

A) Pins 1 and 3 are for the HarDDrive activity LED light. (HDD LED)
Pin 1 is for the Positive ( + ) wire.

If the LED light is dim when operating, switch the wires around.

B) Pins 5 and 7 are for a Reset switch, IF used.
Pin 5 is for the Ground ( - ) wire.

C) Pin 9 is for a 5 Volt wire. (It's probably Red in color, IF used)

D) Pins 2 and 4 are for the Power On LED light. (Light Emitting Diode)

E) Pins 6 and 8 are for the Power On switch. (The Power On switch is located inside the plastic Power On button assembly)

F) Pin is N/C. Not Connected.

For additional questions please post in a Comment.
Regards,
joecoolvette

Jul 10, 2011 | E-Machines eMachines Desktop PC

1 Answer

How do i add a new header on the last page of a document, the document has 6 pages with the same header, on the 7th page i would like to have a different header, unfortunately when i change the header on...


you have to apply a section break on the previous page then you can change header on next page..
hope it helped, feel free to get more clarification

Nov 23, 2010 | HP Computers & Internet

2 Answers

WERE DO LEADS GO FOM THE FRONT PANEL TO THE MBOARD FOR A EMACHINE E4904I DUNT KNW WERE THEY GO


The eMachines E4904 desktop computer uses an Intel D102GGC2 motherboard.

This is Intel Support, and the download page for the motherboard manual, for the Intel D102GGC2 motherboard,

http://www.intel.com/support/motherboards/desktop/d102ggc2/sb/CS-022441.htm

On this page I would like you to left-click right on -
English Product Guide [PDF]

May take a few seconds before you see the first page, and additional time for the PDF file to fully download.
Suggest you let the file fully download before looking through it.

[NOTE*
The computer you are using has Adobe Reader on it, which uses PDF files. If you do not have the latest version of Adobe Reader, 9.3.4., I would suggest downloading it. The new version will remove the old version.

This is the latest version of Adobe Reader download page,

http://get.adobe.com/reader/

I would uncheck the McAfee Security Scan Plus. Just MHO ]

The plastic front of your computer is the Front Panel.
The area on the motherboard that the cables (Wires), from the Front Panel go to, is the Front Panel header.

(Series of pins sticking up from the motherboard)

In the top header of the PDF file is a Zoom Tool icon.
The + sign is the Zoom In tool icon.
The - sign is the Zoom Out tool icon.

I would click on the Zoom Out tool icon, and reduce the view to 100% (100 percent)

At the top of the PDF file in the header is also the page number box.
To the right of the blue Down Arrow.
Go to Page 11.

There are two ways to get to Page 11.

Slow way;
Click on the blue Down Arrow until you get to Page 11.

Fast way;
Put your mouse cursor in the page number box.
Left-click once.
Type 11.
Press the Enter key.

Page 11 shows you an illustration of the motherboard.
Processor to the Top, Ram Memory slots to the Right, the Front Panel header is to the very bottom Right corner of the motherboard.

(R in the illustration points to the Front Panel header)

You can see that the Front Panel header consists of 2 rows of pins.
These 2 rows of pins run parallel to the outside edge of the motherboard.

Go to Page 38.
This page shows a color illustration of the Front Panel header, and where the cables (Wires) attach to.

There are Four pins on the Top row.
There are Five pins on the bottom row.

Processor to the Top, Ram Memory slots to the Right, the Top row of pins are numbered from the Left side of the motherboard, going towards the Right side.

Top row numbering going from the Left side of the motherboard, towards the Right side,
Pins 2, 4, 6, and 8.

Bottom row numbering going from the Left side of the motherboard, towards the Right side,
Pins 1, 3, 5, 7, and 9

1) Pins 1 and 3 are for the Harddrive Activity LED light.
(HD LED)
Pin 1 is for the Positive wire. ( + )
(Orange)

2) Pins 5 and 7 are for the Reset switch, (Reset button), IF used.
(Blue)

3) Pins 2 and 4 are for the Power On LED light.
Pin 2 is for the Positive wire. ( + )
(Green)

4) Pins 6 and 8 are for the Power On switch. (Power On button)
(Red)

5) Pin 9 is for a 5 Volt wire.
Doubt it will be used.

NOTE*
Remember computer unplugged from power, AND observe Anti-Static Precautions BEFORE you reach inside your computer.

For any questions please post in a Comment.

Regards,
joecoolvette

Sep 13, 2010 | E-Machines eMachines Desktop PC

1 Answer

Emachine W3410,the main three wire from the motherboard to the power botton on and off switch was remove and iam not sure wish pin they go to .power led, power sw, H.D.D.led,


The eMachines W3410 uses an MSI ms-7145 motherboard.
Also known as RS480M

This is MSI Support, and the download page for the motherboard manual, for the RS480M motherboard,

http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=204

To the Right of the photo of the motherboard, you will see a gray bar with, BIOS, Driver, Utility, Manual, and RSS.
Left-click on Manual.

On the next page look under the heading to the right - Document.
Left-click on the blue - E7145v2.1.zip

On the final page click on the country nearest yours.
A small window will come up with the heading -
Opening E7145v2.1.zip

Be sure that Save File has a green dot, in the empty circle to the left.
[If not, Left-click on the empty circle to the left of Save File]
Now click on OK, below.

Where this file will go.
If you Do Not, have your documents set to save to your My Documents folder (Documents for Vista), the file will go to your desktop screen.

In either place Double-click on the file. Now go up to the left, and click on - Extract All Files.
Click on Next, and Finish.

You will now see a PDF icon. Double-click on this icon.
Go to Page 15.

The plastic panel on the front of your computer is the Front Panel.
This is where the Power On switch, Power On LED, and HDD LED are located.

The connector on the motherboard where the cables (Wires) attach to, is the Front Panel header.
The front panel header is a series of pins, sticking up out of the motherboard.

The MSI ms-7145 motherboard, (RS480M) has the Front Panel header separated into two headers.

JFP1, and JFP2

Looking at the motherboard with the Processor socket to the top, and the Ram Memory slots to the right, the JFP1, and JFP2 front panel headers are located at the extreme bottom Right, of the motherboard.

[Use the Zoom In feature (+ at top of file) to enlarge the motherboard layout on Page 15]

Now go to Page 38.
Page 38 shows the connections for the JFP1, and JFP2 headers.

The JFP1 header, and the JFP2 header, consists of two rows of pins in a horizontal column.
The pins are arranged parallel, to the bottom edge of the motherboard.

Right above the JFP1, and JFP2 header may be three pins, with two of the pins have a jumper. We will not concern ourselves with this jumper header (BIOS with Protect Jumper)

The JFP1, and JFP2 headers are close together. There is no separation in-between them.

The JFP2 header is for an internal speaker.
The JFP1 header is for the Front Panel cables.

The JFP1 header pins start from the right side of the motherboard, and go towards the left.

There are 5 pins across the Bottom. (Going from right to left)
There is NO pin, then there are 4 pins across the Top.
(Again, going from Right towards the left)

The top row of pins are numbered Evenly.
The bottom row of pins are numbered Odd.

Starting on the Right side, going towards the left for the Top row of pins, the pins are numbered,
10 (NO pin for 10), 8, 6, 4, and 2.

Starting on the Right side, going towards the left for the Bottom row of pins, the pins are numbered,
9, 7, 5, 3, and 1.

1) Pins 2 and 4 are for the Power On LED.

2) Pins 6 and 8 are for the Power On switch

3) Pins 1 and 3 are for the HarDDrive activity LED

4) Pins 5 and 7 are used for a Reset switch. (If applicable)

5) Pin 9 is not used.


Apr 30, 2010 | E-Machines T3958 (827103050974) PC Desktop

1 Answer

Secondary Page : Causing Page Number Issues


Click on view menu, then on header and footer. A toolbar will come over and try to look for a button "switch between header and footer" on the header and footer toolbar.
I hope the numbers disturbing you are down the means you switch to footer.
After switch to footer, the cursor will go down to those numbers disturbing you. You just delete them and everything will be perfect.

Apr 21, 2009 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

kakima

Level 3 Expert

98694 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...