Question about Vacuums

1 Answer

My Hoover carpet cleaner does not **** up water.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Legend:

    An expert who has written 200 answers of more than 400 characters.

  • Expert
  • 310 Answers

Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=560089
Generic problem for all Vacuums
My Hoover carpet cleaner does
Posted by ehodges on Apr 30, 2008
My Hoover carpet cleaner does not **** up water.

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure.
Usually on the Hoover’s the have suction when you remove the recovery tank and from there you need to back track to see if there is a clog of some type or obstruction that is blocking the carpet cleaner from picking up the excess water, if you find that it is from the bottom, use and old wire coat hanger and create a hook on the end and that way you can pull out and remove any obstruction that might be in the way in order to get suction again, or the recovery tank might need a new gasket or it’s not sitting on the vacuum correctly. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
http://www.hoover.com Telephone
Contact our Customer Service Department at 1.330.499.9499
Monday through Friday
8 a.m. - 7 p.m. EST

Don – The Vac Man
Go Ahead. Use Us.

Posted on Apr 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hoover brush and wash instruction manual


Hi there! To prepare for cleaning, put the solution and water in the top tank. While cleaning, all the dirty water gets sucked into the bottom tank. To clean squeeze trigger to release cleaning solution and slowly push carpet cleaner forward, this equals one wet stroke. Continue to squeeze trigger and slowly pull carpet cleaner back toward you (second wet stroke). Release trigger and slowly push carpet cleaner forward over area just sprayed with solution (dry stroke). Then slowly pull carpet cleaner back toward you without squeezing trigger (dry stroke). To avoid saturating the carpet don't do more than 4 wet strokes over one area. Always end with dry strokes. Here is a link to view the instruction manual if needed.
http://hoover.com/file/604/

Hope this was helpful!

Jun 19, 2014 | Hoover SteamVac Carpet/Upholstery Deep...

1 Answer

Instruction manual for hoover swish carpet cleaner


my hoover swish dosent seem to **** up much of the water out of the carpet carpet is still quite wet and bot much water is sucked up for the amount of water that goes in the water dispenser

Nov 26, 2010 | Vacuums

1 Answer

My Hoover SteamVac carpet cleaner leaks water


i have a hoover carpet cleaner and when it is not in motion it leaks water

May 23, 2010 | Bissell Carpet Cleaner Powerbrush Deep...

2 Answers

Hoover carpet cleaner blowing not sucking


While the blower has different source that the sucking of water, the passage for the sucking of water needs to be cleaned to eliminate any blockage within the passage.

Apr 12, 2010 | Hoover SteamVac F5914-900 SpinScrub...

1 Answer

Hoover vacuum carpet cleaner will not sucktion (sic)


No, this cleaner uses no belts.
If you are having a suction problem, first check that the lid on the recovery tank is lined up to the tank when installed to get a good seal.
Second, remove the tank and make sure the round black rubber seal is present on the pipe from the base that aligns with the bottom of the recovery tank. That seal connects the vacuum from the motor to the recovery tank.

Oct 13, 2009 | Hoover F7425-900 SteamVac V2 Widepath...

1 Answer

Carpet cleaner pick up water


water outlet are pluged soap residue seal broken or miss alined

Apr 05, 2009 | Hoover SteamVac Carpet/Upholstery Deep...

1 Answer

Hoover f7410900


you far got to risens it out when you used it so now you have to takeit apart the heater is pluged up

Oct 25, 2008 | Hoover SteamVac Carpet/Upholstery Deep...

Not finding what you are looking for?
Vacuums Logo

Related Topics:

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Roger Potts

Level 3 Expert

694 Answers

Are you a Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...