Question about Office Equipment & Supplies

1 Answer

Xerox 5624 copier with code l5

It stop working and now code L5 showes

Thanks

khairimlutte@yahoo.com

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,072 Answers

The connector is a vertical connectors which links the drawer to the machine. As you are facing the back of the machine, the connector is on the left side next to the Automatic Document Feeder (ADF) connector. The ADF connector is horizontal.

  1. Power OFF the machine.
  2. Unplug the vertical connector in the back of the machine by pushing down on the button at the rear of the plug and pulling toward you. It may be difficult to remove the plug; you need to push down on the button and pull toward you at the same time
  3. Plug the one vertical connector back into the machine.
  4. Power ON the machine.

Posted on May 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The washer stops working and the light flashes L5


The control should flash this error code if it cannot detect the lid switch opening and closing properly.
This error code may also be used if there is a disagreement between the motor and machine controllers on the state of the lid switch.

The control should not allow the unit to run in this condition. This code will also appear if the user presses the START key while the lid is open.

Open the lid or press STOP/CANCEL to clear the display

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question!!!!!

Jun 24, 2010 | Whirlpool Calypso GVW9959K Top Load Washer

3 Answers

New free spirit treadmill - L5 code what does it mean?


Yeah - the sensor is the problem... It is magnetic... You can find it next to the wheel on the belt - It is fairly small.... There is a metal disc in the wheell on the belt that is a magnet.. As it passes by the sensor - the sensor registers the magnet and can simply calculate speed based on the frequency of the passes... Sometimes the sensor slides too far back and ergo can`t register the magnet passing by - Then you get the L5 error...
Follow this link to a picture!
http://www.angelfire.com/nm/nickm/freespiritl5.html

Feb 08, 2010 | Precor C954i Commercial Treadmill

1 Answer

"Lens Error" message in Nikon Coolpix L5


There are a few different things it could be though most likely the lens itself is out of alignment. There are methods you can try to "click" it back into place. First off how long have you owned the camera?
Thanks,
Lee

Sep 14, 2009 | Nikon COOLPIX L5 Digital Camera

1 Answer

L5 show in display and won't work in calypso washer


ss13679,
I believe your code is actually 'LS'. This codes shows up when the controller cannot detect the lid switch opening and closing properly. This error code may also be used if there is a diagreement between the motor and machine controllers on the state of the lid switch. The control should not allow the unit to run in this condition. This code will also appear if you press the start key while the lid is open. Open the lid or press STOP/CANCEL to clear the display.

Your lid switch may be bad. Click here for some help. Also it looks lik this: click here

Hope this helps. Please give me a vote!

-samson39

Jul 17, 2009 | Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

After approx. 30 min. of walking on full speed it


I had this happen on our machine after about 5 years of use. I just recalibrated it and it appears to be working fine now. See the manual for information on the steps needed to take in order to do this.

Jul 11, 2009 | Bowflex Treadclimber

1 Answer

Can't access the flash menu on the Coolpix L5.


Carol, did you ever figure this out? I can't access the flash menu either. Email me if you have a solution - jbcleere@yahoo.com

Apr 12, 2009 | Nikon COOLPIX L5 Digital Camera

1 Answer

L5 code appears after it stops on the Z500 Treadmill


hi,
LS mean low speed error, Please check the sensor wire( if moor move). if not move please check control board.

Mar 30, 2009 | Spirit Fitness Z500 Treadmill

1 Answer

12" l5 no sound


Hi

maybe your voice coil is open circuit! or you have burn voice coil! thats why your unit is not functioning!

Thanks!!!!

Apr 30, 2008 | Kicker Solo-Baric L5 Car Subwoofer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

101516 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

67800 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...