Question about Allied Telesyn AT AR220E Router
There is a way to reset it by connecting a straight rj45 between port 1 - 4 and press the uplink to in position then connect power for 5-10 sec onces the self test goes out it should be reseted try again...
Posted on Jun 28, 2008
You will need to hard reset the whole unit unfortunatly, there should be a reset button on the back of the unit that would do that for you
you might need a sharp head to do that, usually hold that button down for 5 seconds and it will reset your device, you will have to go back and re-set up your network tho.
make sure you find the manual first to get the default log in and password. i believe they are
Log in; admin
please check manual before resetting because you might lose connection.
Hope this helps
let me know
Posted on Apr 30, 2008
Tips for a great answer:
May 13, 2014 | Routers
Feb 23, 2012 | D-Link Routers
Dec 20, 2009 | Belkin Wireless G Plus MIMO (F5D9230-4)...
Sep 17, 2009 | Linksys Wireless-G WRT54G Router
Apr 14, 2009 | Belkin (F5D8231-4) Wireless Router...
Mar 08, 2009 | Cisco 800 (CISCO802) Router
Nov 26, 2007 | Arris SBG1000 Wireless Cable Modem Gateway...
449 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: