Question about Kenmore Oasis HE 27082 Top Load Washer

1 Answer

Computer board shows UL even when very few clothes are in the washer

The washer goes through the cycle just fine until it reaches the rinse/spin cycle. Then it show UL which it is saying that the load is unlevel. I stop the cycle, the timer shows 12 minutes. I rearrange things push the start button, the UL shows up again and the washer just continues to fill with rinse water. Even if I put a very small load of clothes in the washer it does the same thing. I then have to wring the clothes out by hand and try to let the dryer do it's thing.

Posted by on

  • 5 more comments 
  • Anonymous May 19, 2008

    I'm having the same problem as most UL'ers are having!

    I can put as little as one article of clothing and the rinse/spin cycle will go crazy. Please someone help me fix this problem.....!

  • pj purkey Oct 06, 2011

    HOw do you fix this problem?

  • p_heister
    p_heister Jun 12, 2012

    I am also having this problem,,,,any solutions? Anyone?

  • messick42
    messick42 Dec 03, 2012

    I am having the same problem *** my machine getting ul and i am about ready to throw it out the door.I docare what I do even without anything in the washer it still does it.HELP I need a solution.

  • mary188
    mary188 Feb 27, 2013

    I'm having the same issue

  • alinebusse
    alinebusse Mar 07, 2013

    I have this same problem. I had it before the upgrade and still have it after the upgrade. Now my wash time has doubled since the upgrade as well.

  • Anonymous Mar 31, 2014

    Washer keeps displaying error code ul during drain and spin cycle I even ran the washer with no clothing in it. I see lots of other complaints on this issue. How can I fix this myself?



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 117 Answers

Try to unplug and plug back after 30 seconds.

Posted on May 09, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My washing machine top loader once reaches the spin cycle, with 21minutes time remaining, it goes back to rinse and repeats the cycle. What is the problem of my washer and how do I fix it? Thanks

If the washing is not distributed evenly by the time it reaches the rinse/spin cycle, it goes back to rinse cycle. Be present at the machine when it reaches the spin cycle. observe the drum to see if it is of balance and swaying to the sides, if so distribute washing evenly. Usually happens if there is a big garment or more with smaller items,



Oct 06, 2014 | Samsung SW62ASP Top Load Washer

3 Answers

How do you solve the balance problem in the kenmore elite oasis even with no clothes it in

Try running with no clothes? If still shows UL when empty running, your machine needs service. P.S. use HE detergent or else.

Aug 27, 2012 | Kenmore Elite Oasis 27052 Top Load Washer

2 Answers

I have a Kenmore Elite washer and when it goes in the last spin and rinse cycle it starts bouncing around and shows a UL code. After rearranging the clothes and even removing most of them it still does the...

Youshould make sure that the washer is on a concrete floor andmake sure it is level.
Do not put the washeron a wooden floor that moves when you jump up and down. Any ecentric loads will cause the washing machine tovibrate more.

Nov 25, 2017 | Washing Machines

2 Answers

My Kenmore Elite Oasis washer unbalanced signal seems to be very sensitive. Only after several tries of readjusting the load to get it really even that the washer will spin without stopping. I made sure...

If the washer throws an UL error code with out any clothes in the washer then the issue must be concerned with the mechanical alignment inside the machine or a bad CCU.

The most common problem which can cause this is some sort of mechanical hinderance which does not allow the basket to move freely.

The suspension system which holds the basket in its place might be faulty and causing the unbalancing. In this model i think there are plastic ring at the bottom of the basket . Even if they are worn out or moved out of position it may cause the UL error code you are facing

Nov 09, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

2 Answers

Ul code about 10 to 15 seconds into spin cycle machine is level code comes up even if i run it empty


Thanks for using FixYa. UL is displayed when the machine/motor control detects an off-balance load, and is steady on while the washer runs a mini-cycle to rebalance the load.
• Display clears if mini-cycle successfully rebalanced the load.
• If the mini-cycle is unsuccessful, uL will flash until the door lid is opened, allowing the customer to view and redistribute the load. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Aug 22, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

Wash doesn't go through full cycle

I have a Maytag model A490 clothes washer. It works fine up to the rinse cycle and then shuts down. When it reaches this point it has become necessary to manually advance the dial a short ways whereupon it will fill with water and complete the rinse and spin cycles. This happens on both the regular and the permanent press cycles. What needs to be done to fix this problem?

Jul 14, 2009 | Maytag Washing Machines

1 Answer

Tube doesn't spin during rinse/spin cycle.

It needs a new clutch. Call a repair technician.

Nov 19, 2017 | Washing Machines

1 Answer

Washer does nothing during rinse then leaks during spin cycle

hi thanks for the question i would check the drain hose your problem is the washer is not draining check the drain hose thanks the appliance doc

Sep 27, 2008 | Maytag Atlantis MAV6000 Top Load Washer

Not finding what you are looking for?
Kenmore Oasis HE 27082 Top Load Washer Logo

Related Topics:

1,787 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal De

Level 3 Expert

2694 Answers


Level 3 Expert

5655 Answers

Jim Goldsmith
Jim Goldsmith

Level 3 Expert

2005 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides