Question about VIA P4MA Motherboard

1 Answer

Display hanging aftrr booting display hanging

Posted by on

  • brylle May 02, 2008

    no boot no display

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 35 Answers

Hi subramania looks like your motherboard gets heats up check if the fan is working properly and ur processor is not heating up much.

Posted on May 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My system Processor is working, but its not Displaying anything. Sometime its displayed, but hangs and reboot or shutdown.Send me suggestion what should i do to solve this problem.My system Configuration...


There are different possibilities for system hang up. I want you to find it your self from following my simple instruction.

1. (when computer is turn on) Check temperature... overheating can cause system to hang up, it can cause the system to reboot, it can cause the fatal error message and turns your screen to blue. Overheating is cause by exhaust fan or blower not working. Find this blower or exhaust fan on top of the processor, as built in fan in your video card, attached on your power supply and on the casing of your computer. Replace non working fan or blower.

2. Check video card...faulty video card can cause your system to hang up. It can cause also your system to go on blank screen. Most common problem is loosen connection of video card from the motherboard. Disconnect and reseat the video card properly. Inspect the fan, if not working then video card will overheat and system fail. If you previously see moving colors in your screen especially small boxes, or discoloration and screen going black and white then it means video card is already failing. You will need to replace it.

3. Check for hardware failure. keyboard, mouse lan card can cause your system to halt and hang. You will need to disconnect this first when booting and see if by removing this hardware will complete the system to boot up to operating system. Replace faulty one.

4. Harddisk failure. when computer reset or will not boot up completely then hard disk usually cause this problem. Initial remedy is to reseat its connection sata, ide or power supply connector.
If you hear ticking sound in the harddisk or excessive vibration then it will need replacement.

5. Operating system corrupted. this can cause your computer not to boot up properly and hang the system. Reformat and reinstallation of operating system is required.

6. Power supply failure. you need to check the output voltage. dropping of voltage can be cause bi leaking capacitor in the power supply unit. replace it with exact value. Voltage should read +12VDC for yellow, +5VDC for red. and should be stable even with load.

let me know which one cause it.

Feb 07, 2011 | Intel D845GVSR Motherboard

1 Answer

Epox 8K9A2 motherboard ? hangs @ POST CODE "26"


Gday mate , you will have to start with BIOS settings on boot when it detects the drives at the bottom of the screen will be a press ( this button) to enter setup probably delete or F8 go to there and probably set standard defaults would be the best option in the list do tha and follow the prompts back to startup screen, unless it comes up with NTLDR missing which is in the OS files

Apr 07, 2010 | EPoX EP-8K9A Motherboard

1 Answer

My Asrok p4i45gv motherboard hang up


check mem, video card and cables in case something is loose change out video card jim

Feb 25, 2010 | Asrock P4I45GV R5 Motherboard

1 Answer

If i turn on USB drive in CMOS the pC is Hanged.that is it only display mercury in display.After that i turn of the USB drive in CMOS then the system will boot


Hi,

Check in yur bios whether the external device Boot or USB boot has been enabled

Thank u

Please rate me as it wil cost u just one click

Oct 23, 2009 | Biostar M7VIZ Motherboard

1 Answer

PC BOOTS HALF WAY


Try booting into safe mode. If it's a driver problem, safe mode will allow you to start Windows with only the bare minimum of hardware and drivers being engaged. To get to safe mode, press the F8 button on your keyboard during the Windows boot process until it takes you to a screen to let you select Normal, Safe Mode, Safe Mode with networking, etc. I would suggest not using anything other than just Safe Mode. From there, uninstall any software or new drivers that you recently installed. Alternatively, you can use the System Restore feature to rollback to a previous restore point.

Aug 10, 2009 | HP Motherboards

1 Answer

My computer hangs when i boot it by any bootable cd or floppy


Apparently you solved your problem and the system no longer hangs, though you never supplied the information requested.

Apr 07, 2009 | Soltek X400A (SL-85ERV2-L) Motherboard

1 Answer

MY system is not read OS from CD drive


is the bios set to boot from the cd drive 1st?

Jan 20, 2009 | Intel D845GVSR Motherboard

1 Answer

Building new computer with ASUS M2A motherboard and AMD 749 processor. Computer starts, displays ASUS setup screen, goes to blank screen with blinking cursor and then hangs up.


Try to check connections to hard drive...If OK..then check boot device priority in BIOS and change 1st boot device as Hard drive..Then If not worked then chnage 1st boot device as cd rom and boot from a bootable CD and installl OS..

Dec 09, 2008 | Motherboards

1 Answer

My system gets hanged


change the RAM then check

Nov 09, 2008 | Intel D865GBF Motherboard

1 Answer

Motherboard problem


start troubleshooting by unplugging everything from motherboard, leaving only power supply, motherboard, cpu, memory. also check make sure cpu fan/ heatsink assembly is attached securely and if encounter no problem booting like this, add harddrive, repeat, then add optical drive, repeat.
also when you check hardware monitor, what do u get for readings, i.e. temp and voltage?

Oct 28, 2007 | ASUS P5P800-VM Motherboard

Not finding what you are looking for?
VIA P4MA Motherboard Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top VIA Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Tony

Level 3 Expert

2598 Answers

Are you a VIA Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...