- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
A fully assembled & fully set up stroller of this model is folded by a sequence which must be followed in the proper sequence without negating any steps.
•First, remove all occupants & carry-ons (including a carseat or ANYTHING excess or optional). •Second, press the release button(s) (Item/Process #1 in Figure 22a of the instruction manual) aside the push handle while both pressing the button (Item/Process #2 in Figure 22b) in the middle of this push handle & pushing the push handle down (Item/Process # 3 in Figure 22b). •The push handle will drop parallel to the cross-member connected to the wheels on that side of the stroller; & the cross-member braces will "click" into place as the stroller is fully lowered.
Usually when such products do not fold, it is not because of the chassis (unless it has sustained damage or unless there has been/will be a recall due to a chassis problem). Non-folding situations are often caused by obstructions such as at/in any of the hinges or rotating/sliding parts, by release buttons/levers that have not been fully deployed, or by braces that have not been properly snapped into position. Notification of recalls is one of the benefits of registering the product with the manufacturer, but more than likely, something is obstructing the folding movement or a release lever/button has not been fully deployed.
You can find product instructions for the Graco Cleo - and how to fold it - here: http://www.gracobaby.com/CustomerService/ProductInstructions/Pages/ByBrand.aspx?page=ProdInst&Subcategory=Lightweight%20Strollers&Model=G091158&CategoryName=Strollers
To fold the buggy, it is necessary to operate both a primary lock, and then a secondary lock. Start by making sure that the front swivel wheel is locked. Operate the primary locking device by pulling upwards on both of the plastic tabs located on the side of the handle arm just below the foam handle grip. Begin pressing downwards so that the pushchair begins to fold. Next, release the secondary locking device (raising the bar located lower down on the left-hand side) and continuing pressing downwards on the handle bar until the pushchair is fully folded. The handle bar can then be folded inwards to the maximum, by pressing simultaneously on the adjuster buttons on either side. Finally, with the chassis laid down, lock it into its folded position by closing the folding latch operated on the side.
Operating instructions, with diagrams, may be obtained from email@example.com
I hope that this is helpful. Do leave some feedback, so that we know how you got on!
You can go to maclarens web sight and watch the 5 second fold demo. You have to pull up both tabs where the cross metal bars meet. Then on the right is another little tab you use your foot to push down. It will fold very quickly then. There is a lock on the left. FYI, make sure you unlock the hood on both sides so it does not break like mine did today :(
Although I cannot locate the instructions in an electronic format, looking at the image I would suggest that it may be the following:
Down the right-hand back leg of the stroller, there is a horizontal peg sticking out, push this down with your foot, this will then allow the pram to be pushed forward (away from you) and then folded. You should have a locking device on this to keep it closed. If the locking device is on now (an it's already folded) don't force it as you will break it.
I would ALWAYS recommend that you contact the supplier for advise also.
If you go to a local baby shop and ask them to take a look this will help, although I seem to remember that this folds and opens very similar to the Maclaren Techno XT.
First you need to make sure that the handle bar is in the top most position.
Next the Front wheel needs to be turned sideways as you begin to lower/fold the buggy.
You must also watch the basket part so that it folds up and in so that it doesn't get stuck.
I usually will also fold it forward and down so that I know the wheel and basket are in the right position. When it is finally down it should clip into place.
Hope that helps a little. :)
Just below where the handle bar part meets the rest of the frame, on the left and right side you will find black plastic bits that point down, which you can slide your finger behind. The right hand one has a silver button which you need to push in. Then pull both of the plastic levers towards yourself and push down at the same time. The Mac 3 will then fold down.
I find to fold it, I place my foot on number 3 and push a little then press number 2 and 1 and the same time and fold the seat unit. Then just push down ontyo it untill t is fully folded. I find it to difficult to press 1 then 2 then 3 - 3 always gets jammed if i follow their instructions.
To unfold pull number 3 untill it clicks then nfold seat unit an click the middle handle - hey presto buggy shuld work :)
i thk the instructions tey give a more work than needed.
Locate the fold button on the side of the handle (It has a red arrow on it). Using both hands, slide both buttons up and push the handle forward. The stroller should fold up. Then push the handle down to lock everything in place.
This is designed for folding with one hand.
On the handle there is a red grip. Below the grip there is a button. While pushing this button, turn the red grip clockwise and push down. The stroller will fold.