Question about Computer Speakers

1 Answer

ALTEC LANSING MULTIMEDIA COMPUTER SPEAKER SYSTEM:

All of a sudden the volume, bass & treble indicators are at the maximum settings. I'm unable to move the settings up or down. I have disconnected and reconnected the system with no results. Also, I have cleaned the jacks and the sub-woofer again with no results. I dare not open the main speaker for fear of damaging it. I'm controlling the volume via the volume control on the computer. However, this is not feasible because different situations require a quick volume adjustment which I'm not able to. Please help.
drjoelo

Posted by on

  • famehot11 May 25, 2009

    My computer speaker system is named G 1050 multmedia speaker system for about a year my speakers has been broken.For about half that year i tried fixing them i took them to a repair shop but it said there was no problem.I took them home and tried my self or 4 days non-stop.I've rewired them alot of times when I connected a double sided wire to the speakers it made a horrible sound.so after a few days i thought up that it might be the computers problem. so I took the computerto a repair shop. THey said it was no problem at all.so can you guys help mee?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 137 Answers

The controller chip inside your altec is possibly defective. i have the acs 45.1 and the unit wont turn on.. the culprit is the main power/volume chip.

Posted on May 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

9 pin diagram altec lansing


can anyone help me with the Altec Lansing VS4121 2.1 Channel i need the wiring diagram of 9 pin cable i broke it. please mail me the layout at maurya.mohit07@gmail.com

May 20, 2012 | Altec Lansing VS4121 2.1 Channel Powered...

1 Answer

Altec lansing 221 computer speakers sound solution


Unfortunately it looks like Altec Lansing goofed up on this set and didn't provide a bass control knob. You will need to use some sort of software equalizer on your computer to turn the bass down.

Mar 24, 2012 | Altec Lansing 221 Computer Speakers

1 Answer

Low volume on Altec Lansing 4.1 system


if the volume controls of the speaker is set to 100% together with the volume control on your computer then still get a low volume,try some other device where you can use your speaker like mp4,if still got same problem,bring it to a service center there might have a problem with the amplifier.

Sep 10, 2009 | Altec Lansing Multimedia Computer Speakers

1 Answer

Main speaker not working


Check the bass setiings in the computer and the clume control panel. Also check the audio settings in the computer for 4.1 channel sound

Feb 03, 2009 | Altec Lansing Multimedia Computer Speakers

1 Answer

Just hooked up speakers. I am getting pings from computer but no


maybe you have a codec problem ...try open the video with VLC player ..ori install AC3 Filter

Dec 29, 2008 | Altec Lansing Multimedia Computer Speakers

1 Answer

Altec Lansing 4.1 ADA880


if you are a technically skilled person
simply clean all the IC(chip) leads, by using a blower or using a painting small brush
the dust come in contact with the other pins that make this problem

Jan 23, 2008 | Altec Lansing ADA 885 Computer Speakers

2 Answers

How to repair atp3 altec lansing


Best bet would be to just strip the wire with a wire stripper or utility knife and twist the bare ends together to fix the connection. A little electrical tape around those wires and you should be almost good as new. Of course you might notice some difference in quality but I'm pretty sure the only way round that would be replacing the cable.

Try it out and let me know how it works out for you. If you know how to solder it might be a good idea to solder the connection as well.

Jan 04, 2008 | Altec Lansing ATP 3W Computer Speakers

Not finding what you are looking for?
Computer Speakers Logo

Related Topics:

353 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computer Speakers Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

508 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

Are you a Computer Speaker Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...