Microwave GE Spacemaker (JVM130K004) needing access to fuse

Hi,
Here is a tip that will help you to figure out what is wrong with yourMicrowave Oven....

Microwave Oven Basic Troubleshooting Tips

heatman101 ==-
=-

Check thermal fuse cut out gone..

HI. in most cases, this will lead to a failed Heating device(magnetron tube).It would be wise to check the Magnetron cutoff fuse to be sure of its integrity. if the fuse is blown, simply replace it. if the fuse continues to show continuity, replace the magnetron.

(((The fuse is located inside the unit along side the magnetron, near the blower housing.)))

Yes but need the model number to help you know where it is.

Hello. You have isolated the problem.

Usually, when your microwave oven doesn't work it all, the internal fuse (thermal fuse) is blown. This fuse protects both you and the oven. When it blows, you need to have a qualified appliance repair technician replace it.

yes there is. the fuse should be located behind the vent grill on the right side above the control panel. there may be a metal "grate" covering the access to it

you would nee to replace the 20amp fuse in it. lwt mw know if you need further assistance

First you have to unplug your device. Next you must remove the cover from the micowave. Follow the powe cord to the unit the fuse should be right at the beginning of the powe cord. I hope yhis will help you.

model # JVM1870BF001 GE Profile spacemaker XL 1800 microwave

after episode of using defrost which burned food--now stopped heating--still has power/fan--don't know how to change fuse--please help

Inside unit is a cylinder fuse which can blow for a number of reasons. External cover needs to be removed to access. If you are confident in doing this and can find & check the fuse then it would be my first guess. If fuse is OK then you will need to have repaired. If fuse isblown & you replace then it blows again,you will need to have repaired. regards