Question about Belkin (F5D7230-4) Router (587009)

2 Answers

Help I have my wirless router all hooked up and its working, once I unplug the cord from my laptop, I loose the internet, what is wrong, why wont it work without being plugged into my laptop, please help.

Posted by on

  • beautychick May 15, 2008

    I am having the same issue. I have the Belkin F5D7230-4 Wireless Router. Please help!

  • Ella Grace Leynes
    Ella Grace Leynes May 11, 2010

    You should configure the wireless portion of the router before wireless computers can connect to it.



    What is the exact brand and model of your router?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I just tried this solution from another post and it worked!

---------------------
It sounds like your router might not have a valid IP address from your ISP. Give this a shot:

  1. Unplug the power cable from the modem.
  2. Open a Web Browser
  3. In the address bar type http://192.168.2.1
  4. Click on Connection Type in the left hand column under Internet WAN heading
  5. Enter your password if any and click Submit
  6. Click on Dynamic and then click on Next
  7. Type in your Hostname if required.
  8. Click on Apply Changes
  9. Plug the power cable back into the cable modem.
  10. Click on the Home link at the top of the screen
  11. It should now show Connected under the Internet Status column

Posted on May 15, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 144 Answers

Hello!

check if the wireless settings of your router match the wireless settings of your laptop. by the way, do you have a wireless adapter installed on your laptop? if yes, is it tun on / enabled or installed properly?

Posted on May 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cantconnect to the internet


have you got pc's with different operating systems installed on them?
i had this problem once it turned out that because i had my desktop on windows 7 and my laptop on vista my laptop only got local access to internet if had been on windows 7 as well there would of been no problem any here's a guide to help: http://www.thebitguru.com/articles/20-Fixing%20the%20local%20only%20internet%20access%20issue%20in%20Windows%20Vista

Jul 13, 2010 | NetGear WNR2000 Wireless Router

1 Answer

The ''wireless'' light on my wireless router is flashing amber


What have you tried so far?
1. You can unplug the power cord of your modem on the back of the modem.
2. Unplug the power cord on the back of your router
3. Unplug the ethernet cable at the back of your modem
4. Unplug all the ethernet cable at the back of your router
5. Wait for 2 minutes then plug the power cord back into your modem and the ethernet cable
6. Wait for 2 minutes again then plug the power cord back into your router and the ethernet cable
7. Try to reconnect
(Note: Resetting your router will restore to factory default)
8. If not successful, try resetting the router. While the power cord is plugged at the back of your router press the reset button for 15 seconds, unplug the power cord of your router and press the reset button again for 15 seconds then plug the power cord back into your router and press the reset button for 15 seconds. (after resetting reconfigure your router) Try to connect.

9. If not successful, try to upgrade the firmware

Jan 09, 2010 | Belkin F5D8236-4 Router

1 Answer

Belking wireless router can't see my comcast cable modem


then login to router setup page with 192.168.2.1 type this one in the address bar of ur browser
then u will see router setup utility
then click on the restore factory settings on the left hand side under UTILITIES
it will ask u for password leave it blank and click on submit
then click on restore factory default
once it is completed then on the rite top corner u can find the internet status --- it has to be connected or else
u can unplug the modem and routers power cord and wait for 1 min
the plug the powercord of the modem first wait for few seconds till the light are stable on the modem then plug the powercord of the router
then ur internet light should be solid on the router

Dec 22, 2009 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

Ethernet won't reconise modem for xbox live


Once you have everything hooked up:
Ethernet cord going from modem into wireless router in port labelend internet or wan, and an ethernet cord going from the router to the xbox you should try these steps:

Unplug the power cord on the modem and plug it back in- once all the lights come back on
Unplug power cord on router and plug it back in-

Hope this helps.

Apr 07, 2009 | Linksys Wireless-G WRT54GS Router...

1 Answer

I loose internet everytime the phone rings


Absolutely. Wireless LAN is on 2.4GHZ. You will want to get a phone at a different frequency.

Apr 05, 2009 | Belkin Routers

1 Answer

Connection


You should not need the CD for having a PC to access the internet. If you have the manual - Look at accessing the router with http://192.168.0.1

Not sure what you are trying to do... Are you trying have your sister be able to access the internet, through wireless? I'm sure I can help with some more info.

G'luck

Oct 24, 2008 | Linksys BEFSR41 Cable/DSL Router W/4 Port...

1 Answer

Laptop wireless hook up


I just got your messages, looking at the details of your laptop it has a build in wireless so as you have noticed since its working now, you won't need to purchase a adapter for the laptop since it already has one build in.

Let me know if you need assistance with anything else.

Aug 14, 2008 | Linksys Wireless-G WRT54G Router

1 Answer

G router wont work through vista or satellite dish


hello!

-- who is your internet service provider
-- what is the operating system of your computer?
-- is this working fine before or is this a brand new router

you may try this and see if this help solve your problem. make sure your computer is directly connected to the router

Step 1: Shutdown the computer.
Step 2: reset the router while power on then Unplug the router’s power cable.
Step 3: Unplug the Broadband modem’s power cable and wait for 30 seconds.
Step 4: Plug in the Broadband modem’s power cable and wait for its lights to appear stable.
Step 5: Plug in the router's power cable once the modem’s lights appear stable.
Step 6: Power on the computer on and configure the router settings
Step 7: test the Internet connection.

if this still didnot work, upgrade the firmware of your router

note:

configuring the router settings will depends who is your provider. if your isp is dsl you need to configure your ISP username and password on the router. if your router is a cable no need to change any settings on the router. it should automatically work

if you are still having trouble configuring your device, try to call supportrix and use supportcall as your promo code for 1 free technical support.

Jun 01, 2008 | Belkin (F5D7230-4) Router (587009)

Not finding what you are looking for?
Belkin (F5D7230-4) Router (587009) Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

steve morris
steve morris

Level 3 Expert

1673 Answers

Christopher Thrash

Level 3 Expert

425 Answers

Are you a Belkin Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...