Question about Televison & Video

1 Answer

Hi Mike: Can you help me with my Panasonic PT-47WX49E convergence and service mode

I'm glad there are system board gurus like you out there to help with these issues. I was reading some of your posts and your knowledge is perfect for this issue.

I (like other posters) have seen technicians get into the grid for fine convergance adjustments. I recently replaced a signal board in my projeciton tv (from PTS.com) and also got faxed the 16 page Convergence adjustment manual. I'm able to get into red CHK mode but am lost as to how to get the grid up and go from there.

As I understand it I should do a coarse adjustment first but I don't have any signal generators or anything when it refers to "Apply a pattern (i.e. NTSC) to adjust specific format".

Can you guide me to make adjustments that don't require any extra equipment if possible? I understand I may need to buy a grid pattern for the fine adjustment mode.


I'm not sure about getting into Cursor mode or Data mode from the red CHK mode.

thanks for your help Mike

Jeff (I fix computers at Microsoft, and my dad was a big televsion (vacum tubes days) guru, but you've mastered this world.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 398 Answers

Sorry, I have never done that on a Panasonic set so I am not at all familiar with the procedure. I will look around and see if I can find simplified steps.

Posted on Apr 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Helloi have a problem with a panasonic 47wx49e in the convergencehorizontal red lines cant be staigthevery adjustin conventional mode are working but when i get inside of the dynamic convergence adjusts...


I would look for burnt resistors off the red IC, hopefully its not the DCU (digital convergence module) as most of these are integrated into the signal board. here is a tutorial i made up:
http://www.fixya.com/support/r5001731-convergence_diagnosing_convergence
Let me know if I can be of further assistance.

Jun 26, 2010 | Panasonic PT-47WX49 47" Rear Projection...

2 Answers

PT-47WX49E Service Manuals


Hi,

I'll let you know if there is a service manual available.

Apr 25, 2008 | Panasonic PT-47WX49 47" Rear Projection...

1 Answer

Panasonic PT-47WX49E blue convergence problem.


if convergence does not adjust in menu mode could be a defective convergenceic or fuse

Nov 11, 2009 | Panasonic PT-47WX49 47" Rear Projection...

3 Answers

Service manual for PT-47WX49E


i need the service manual as well, if possible (i'm just having a red horizontal convergence issue).

also, any advice on what to do would be swell!

my email is v6vywa002 [at] sneakemail [dot] com

thanks!!

Aug 17, 2008 | Panasonic PT-47WX49 47" Rear Projection...

1 Answer

Green rainbow streak on bottom of TV PT-47Wx49E


If Convergence on setup dosen't work, And you think its not STK Convergence chips!, Then "Yes" It more then likely will have a few open Resistors!... (Near STK chips)

Jun 24, 2008 | Panasonic PT-47WX49 47" Rear Projection...

1 Answer

Blue ghosting on Panasonic PT-47WX49E


your convergence IVs need to be replaced. Its an easy repair if you can solder. you can get the two ICs you need at the following link. they also provide free installation instructions and free on line tech support while youre doing the repair. You need two ICs they are numbers STK392-110. Let me know if I can be of further assistance. I am one of servicemanuals support techs and board rebuilder.
http://servicemanuals.vstore.ca/

Apr 11, 2008 | Panasonic PT-47WX49 47" Rear Projection...

1 Answer

Panasonic PT-47wx49E


you have to go into service menu to reset convergence after changing ics.I never posted this because if you do not know how you can shut set down.which chassis do you have ? There is 3 diffenert ways to enter into service mode for convergence.

Apr 05, 2008 | Panasonic PT-47WX49 47" Rear Projection...

1 Answer

Panasonic Projection TV PT-47WX49E convergence ...


may not be convergence may be a bad stk for convergence if that style if so try stk

Oct 28, 2007 | Panasonic PT-47WX49 47" Rear Projection...

2 Answers

PT-47WX49E - Convergence issue, need a service manual


HI Mike you will have to purchase that schematic at samsphotofact.com or repairworld.com they cost about $40.00.US.good luck.

Apr 26, 2007 | Panasonic PT-47WX49 47" Rear Projection...

47 Answers

PT-47WX49E Service Manuals


scott iam in need of one too would you PLEASE add me to your list Thanks so much

Apr 11, 2007 | Panasonic PT-47WX49 47" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...