Question about Dryers

1 Answer

Kenmore dryer I went to turn my dryer on and i hit the button and it started for a split second and then stopped and i havent been able to get it started again, what could be the problem? It has electricity going to it.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 172 Answers

If you hear a loud humm when you tried to start the dryer then you probably have a bad motor. If you did not then you have most likely blown your thermal fuse. It is a small white fuse on the back just above the heater. You should replace this and your dryer will work again. There are several other possibilities for this issue so let me know if you have any other problems. Thanks. MCA0824@aol.com

Posted on Apr 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 4 yr. old kenmore elite HE4 dryer. I put the clothes in and hit normal cycle. 41 minutes automatically comes on. I hit various buttons and nothing happens. I hit the start button and it finally...


if I am understanding the problem correctly then this website should work, if I am misunderstanding then the second one might help.

http://www.epinions.com/msg/show_~threads/cat_id_~17/id_~3088/forum_id_~409

http://fixitnow.com/wp/2009/03/17/easy-fixes-for-two-common-problems-with-the-whirlpool-even-heat-dryers/

Nov 03, 2010 | Kenmore Elite HE4 Electric Dryer

1 Answer

My Kenmore 500 series electric dryer seems to be heating, but just stopped running. I hit the start button, and the drum heated up, but did not start turning. I'm guessing that the start switch is not...


Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor goingbad...

Here are a couple of tips that I wrote will help you to figure out why yourdryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101

Oct 14, 2010 | Kenmore Elite HE4 Electric Dryer

1 Answer

I have a Kenmore 80 Series dryer. When I push the start button it makes a noise but won't turn on or it turns on for a few seconds and then stops


Did you figure out what the problem was? I have the same problem with my Kenmore dryer.

Thanks

May 17, 2010 | Dryers

1 Answer

I have a Kenmore Gas Dryer 70 series Model# 11078702894 and I just had to replace the ignitor in it and now when I push the button to turn it on, it will only stay on a split second. what could be the...


could have a blocked vent line,a blocked duct that the lint filter slides into,you should do a clean out on the dryer once a year anyway so this is a good place to start,if the fire is lighting and going out also could be coils or valve but start with clean out

Jan 23, 2010 | Kenmore 63942 Dryer

1 Answer

I have a Kenmore dryer model no. 1109282610. When


the motor is humming,could be something stuck in blower wheel,might of had lint filter out and ran dryer and something went down into blower wheel,the belt could be locked up or the motor is bad,take the belt off of motor and see if motor spins

Nov 02, 2009 | Kenmore Dryers

1 Answer

Kenmore HE2 Gas Dryer Control Panel Does Not Work Properly


I have the same problem..really disappointed in this product. I bought mine in 07 as well..I found that if i hold all the buttons down and then hit start it (Sometimes starts), but after it starts it turns off after 10 seconds.

Mar 27, 2009 | Kenmore Dryers

2 Answers

Kenmore dryer start button not working


when I push the start button on my kenmore dryer it will not start and the drum will not turn.

Nov 09, 2008 | Dryers

1 Answer

Keeps stopping


I have a feeling you are buying a timer board.

Dec 11, 2007 | Kenmore Elite HE4 Electric Dryer

Not finding what you are looking for?
Dryers Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

yadayada
yadayada

Level 3 Expert

64286 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...