Question about Televison & Video

1 Answer

Red vertical lines - Televison & Video

Posted by on

  • Bill Crunk Aug 16, 2008

    My problem appeared identical. Red lines from top to bottom about an inch apart across the entire screen of my JVC AV-48WP30. I ordered the $70.00 kit online and replaced the two ICs and twelve resistors on the convergence board and it is still exactly the same.
    Anyone care to toss a few suggestions at this old goat?

    Thanks, Bill
    crunkinator@gmail.com


×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 131 Answers

Red verticle lines are most likely a bad tube or convergence problem. You will not be able to fix this your self . I suspect a bad convergence ic cost for parts are around 45.00 servicer charge about 250 to fix. At least know when you call a servicer you will have
a good understanding of problem.good luck.

doctor video leadingedgeelectronics since 1987

Posted on Apr 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

How to set convergence on Projection TV ' s


I have given an general explanation on most projection TV ' s

  1. Enter the menu on your TV. Use the remote control and bring up the menu.
  2. Choose "Convergence." This may be under "Picture Settings," "Function" or "Advanced Options."
  3. Select a color. You will have red, green and blue to choose from. Do each one, starting with red.
  4. Press "Enter." A crosshair pattern will appear on your screen.
  5. Adjust vertically. If there is a horizontal red line visible, press the up or down arrow keys (or channel up or down) to adjust the convergence until the line is superimposed on the horizontal-center line of the white crosshair.
  6. Adjust horizontally. If there is a vertical red line visible, press left or right (or volume up or down) to adjust horizontally. Do this until the line is superimposed on the vertical line of the white crosshair.
  7. Save settings. It is important to save your settings when you are done, instead of simply exiting the menu.
  8. Repeat these steps for all colors.

on Mar 18, 2010 | Televison & Video

1 Answer

Red vertical lines, projection tv


This is a convergence problem and needs technical intevention. Some adjustmkents can be done on the rear of some models but rarely fix it for long


Aug 18, 2009 | Panasonic Televison & Video

1 Answer

Mitsubishi rear projection tv


replace vertical IC and shadows/ghosting the problem is either electrolytic capcitor or video IC or convergence adjustment

Aug 18, 2008 | Mitsubishi WS-65809 65" Rear Projection...

1 Answer

Screen has red vertical line


This is rare in a newer TV. You prob have an open winding on red yoke, or the problem may be in the convergence circuit. Check for open connections, check for crt burn. Vertical? up and down line??

Please give more info. Sorry I was not more helpful.

Jun 11, 2008 | LG Televison & Video

1 Answer

LCD TV - RED LINE


I have a thin red vertical line on the left side of my Philips LCD TV

Feb 25, 2008 | Televison & Video

1 Answer

Black Screen with vertical lines down the side?


· http://esupport.sony.com/perl/news-item.pl?news_id=24
· Which models are affected with the "flicker" problem?
A1: There are 12 models in total: KDP57XBR2, KDP65XBR2, KP46WT500, KP51HW40, KP51WS500, KP57HW40, KP57WS500, KP57WV600, KP57WV700, KP65WS500, KP65WV600 and KP65WV700.

Jan 03, 2008 | Sony KP-57HW40 57" Rear Projection...

1 Answer

Mitsubishi WD52527 Pinstripe vertical red lines


Is the set blurry with pinkish color and white lines?

Dec 21, 2007 | Mitsubishi WD52527 52" Projection HDTV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

610 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69718 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6364 Answers

yadayada
yadayada

Level 3 Expert

63456 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...