Question about RCA 14F512T 14" TV

1 Answer

RCS 14F512T 14" TV

Remote doesn't work. All pannel buttons either turn TV on/off (except the power button) and if a botton is held in it will perform the function until released and then TV turns off. Cannot even get the menu button to stay on long enough to figure anything out. Any suggestions?

TV is a year old and hardly used - in guest bedroom.

Posted by on

  • djd2713 Oct 28, 2008

    At times the TV works perfectly at other times when any front panel button is pressed the channels switch all the time or the volume does it's own thing. Also when this happens the power switch and remote have no control over the tv. Setup menu is also impossible to use

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 71 Answers

Possibly one of the switches behind the front buttons is shorted;
could one of the front buttons be pushed in and not releasing-maybe the power button?

Posted on Apr 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a RCA 14"


Main control board is toast. Really not worth repairing unless it's in a specialty location. If it is, it's going to have to go to a repair center.

Jun 25, 2011 | Televison & Video

1 Answer

My Dish 5.0 IR remote won't program to my new TV, it's an Emerson, the model number on the back is- LC320EMXF. I've tried holding the TV button until all the top lights flashed and then...


lrsnihe

You were attempting to perform a power scan initially. The second procedure is manually attempting to address the remote to your TV. I will give you the procedures again so you can try one more time. Emerson TV is one brand we have a low percentage of success getting our remotes to work. If it still doesn't work, we could try replacing the remote.

TV code: 623, 667, 666, 233, 516, 537, 544, 642, 655, 699, 000, 999, 888, and 720.

Remotes: Basic (Television Only)
  1. Turn the Television On.
  2. Press and hold the clear TV button for six seconds until the LED flashes.
  3. Enter the three-digit code using the buttons on the number pad.
  4. Press #. Note: The LED will flash three times.
  5. Test functionality with the TV.
  6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.
Remote Power Scan: Basic Remote (Television Only)
  1. Turn the Television On.
  2. Press and hold the clear TV button for six seconds until the LED flashes.
  3. Press and release the red TV Power button.
  4. Press and release the Up or Down Arrow on the remote until the television turns off once every second.
  5. After the television turns off, press and release the # button.
  6. Test functionality with the TV.
  7. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

Jun 12, 2011 | DISH Network IR Remote Control

2 Answers

Remote control brocken and dont know how to turn on tv without it


hi,
just press the power button or channel up button or down button on the pannel of your tv.
ok

Mar 07, 2011 | Toshiba 37C3030D 37 in. LCD Television

1 Answer

I don't know how to put the tv on video


Tries pushes the tv manual button channel up a few times,tv will to go into the Video mode 1 or 2 for most of the analog tvs.Or look on the bottom front of the tv frame bazel for a manual buton said VIDEO.Pushes that manual VIDEO button to get in video modes 1 or 2.U have ur original remote have a button said INPUT pushes that button a few times to get into Video 1 or 2.

Mar 02, 2011 | RCA 14F512T 14" TV

2 Answers

Lost remote and can't change the input


They sell basic RCA remotes at places like Walmart for about $5.

Apr 12, 2010 | RCA 14F512T 14" TV

1 Answer

My DVD player is hooked up to my RCA truflat but i cannot find the picture. I lost the original remote to my RCA truflat and am now using a RCA universal remote. How do I get picture on my tv?


There should be a button on the front of the TV that says TV/VIDEO or INPUT. Turn on the DVD player and put a DVD in it and press play. Press the TV/VIDEO button until the picture is present.

Good Luck....

Jan 19, 2010 | RCA 14F512T 14" TV

2 Answers

I do not have a manual and need to know how to set it up and the code for a vizio tv.


On your remote you will find a setup botton and what i want you to do is hit set up then hit the tv botton and hit channal up and do that untell it turns off your tv are the channal if that works it tv botton again and your remote will work other wise in the back of your remote it well tell you a code number and go on line to philips and they will give your your codes for you.

Dec 09, 2009 | Philips Magnavox Learning Universal Remote

1 Answer

Remote is lost to RCA 14F512T 14" TV. How do I get it to the channel needed to watch DVDs?


have you tried turning on the dvd player sometimes they autumatically come on

Nov 16, 2009 | RCA 14F512T 14" TV

1 Answer

FPA Lock


press and hold the power button on the remote for 8 sec
set should come on.
regards,
daniel

Jan 09, 2009 | RCA 14F512T 14" TV

2 Answers

Can not change channels on TV


Good Day;

To reset the TV unplug power cord from the wall for 2 to 5 minutes then plug back in.

Good Luck, big IRISH.

Sep 26, 2008 | Hitachi Televison & Video

Not finding what you are looking for?
RCA 14F512T 14" TV Logo

Related Topics:

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72620 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...