Question about PfaFF Hobby 4260
How do i fix the timing of the machine myself?
SOURCE: needle keeps falling out of
The threads inside the screw hole are probably stripped. If so you will need to have them rethreaded and a different screw used or have the needle bar changed.For this you should see a technician.
Posted on Jul 18, 2008
SOURCE: Hobbylock 774
If the needle bar is no longer available, the current needle bar can be repaired by cutting new threads in it and changing the screw. Not simple but not rocket science either.Most mechanics can do this.
Posted on Aug 11, 2008
Tips for a great answer:
Jul 17, 2015 | PfaFF Sewing Machines
Jul 12, 2015 | Sewing Machines
Mar 03, 2015 | PfaFF Sewing Machines
The hobbylocks all thread in much the same fashion. There is a diagram for a four thread hobbylock on this website. It would be better if you found a Pfaff dealer to show you as it is quite complicated.
Once you have it threaded, always cut the old threads at the spool and knot new ones on and pull through. You will have to thread the needles as the knots will not pass through but it does save an awful lot of frustration when needing new colours on the spools.
Mar 28, 2011 | PfaFF Sewing Machines
Feb 02, 2010 | PfaFF Sewing Machines
Jul 18, 2008 | PfaFF Creative 7570
832 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: