Question about Televison & Video

1 Answer

I have mitsubishi tv model wt-42315 about 8 months old and would not turn on with remote or manual no homing sound when connected to a different electrical outlet nothing the red lite on the front panel would not light up. Connection cable is find is been checked. What could be the problem

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,294 Answers

If your TV is less than a year old, I would suggest to call the manufacturers and ask them for an authorized repair center near you to fix it under warranty.

Posted on Apr 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Red color shifting and ghosting on my wt-42315


Tv have a problems known as a convergence picture problems,it is dead.Tv have R,G,B colors lines mis alignments,have colors pictures shadows or 3D pictures look alike?Yes,than the tv convergence board have dead parts like 2 STK convergence ICS and some or all of it resistors too.These parts on the tv convergence board must have be replaced to solved the tv convergence picture problems.The shop will cost u like $300-350 for parts and labors.

Jul 07, 2011 | Mitsubishi WT-42315 42" TV

1 Answer

I have a mitsubishi wt-42315. when i turn it on it shuts down right away. any thoughts?


Do the self check this model has.

When you turn it on and green power light goes out:

on front of set press and hold both the menu and input (or device) buttons at the same time for at least 5 seconds and release both buttons.

The power light will blink a two digit error code like 2 blinks, 2 blinks, a pause and repeat it several times.

Let me know what error code you find and I will tell you what problem is.

If this helped rate this solution as very helpful as I do this here for free.

SD TECH

Sep 20, 2010 | Mitsubishi WT-42315 42" TV

1 Answer

Mitsubishi WT-42315 42" TV has a red/Green color seperation


you need to replace the convergence chips, i had this done about a year ago and costs 450.00 usd
good luck

Jan 10, 2009 | Mitsubishi WT-42315 42" TV

1 Answer

After a few minutes the color goes to intense red and green


My tv didn't turn green, but the red separated significantly. It started off happening after a few minutes of being on (I suppose the defective part was "warming up"), then it got to where it was like that immediately upon turning the tv on. In my case, I had to pay a tv repair man $350 for a new part. There are 2 microcircuits that control the color alignment--one that controls the red only, and the other controlls the other 2 colors, blue and green I believe. Maybe your part is the blue/green controller, mine was red. The repair man said these parts fail so rarely they don't stock the part. The cost of repair may be different for a different part, but either way you have to choose if it's worth that cost to you. If you get rid of it, I'll buy your tv stand ;-), I bought mine from a friend and didn't get the stand in the deal.

Dec 14, 2008 | Mitsubishi WT-42315 42" TV

1 Answer

Convergence board


YOU WILL NEED PROFESSIONAL HELP THIS IS NOT A DO-IT-YOURSELF JOB. SORRY

Jun 01, 2008 | Mitsubishi WT-42315 42" TV

1 Answer

No power on


It could be coolant leaked from the CRTs, or a failed fuse due to the conv ICs shorting out or going open, depriving the turnon circuitry of its proper voltages.

These are the usuals. Since Mit has very elaborate protection circuits, it could be anything. More troubleshooting needs to happen before we'll know more.

I do a phone coaching service if you want to check that out.


Mr Bob

Apr 29, 2008 | Mitsubishi WT-42313 42" Rear Projection...

1 Answer

Mitsybishi WS-65711


Dm module repairs relate more often to Mits Models that end
with # 13 Example = WS-65713....................For info.....
www.chrisandnat.com/projects/blinkingtv/blink.htm ..T.

Typical DM module repair is continuos blinking LED.......
Your symptom is different.........

Apr 04, 2008 | Mitsubishi WT-42315 42" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71705 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

67930 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...