Question about Sony WEGA KE-42M1 42 in. HD-Ready Plasma Television

1 Answer

No picture-Sony Large screen 3 yr old Sony TV has no picture. It blinks green about 10 times then blinks red. Thanks in advance for your help.

Posted by on

  • toni_c2002 Jul 26, 2008

    i have a sony ke-42m1 42 in. I have no picture but great sounds. i have unpuggled about a week the picture came on and lasted only a week. there is nothing blinking. please help

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Did you ever get your tv repaired?

Posted on Jul 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony bravia kdl55hx729 3d led tv turns on 3 seconds shows picture than four red flashes


Hello,
the error light sequence that you are seeing is indicating a "backlight error". Most likely you have a bad inverter board -the board that powers up the back-lights behind the display panel. They might be available via ebay if you are a DIYer, or you need to call for sony service.
Good Luck!
Rich Lilja

Dec 07, 2013 | Sony Bravia KDL-55HX729 LED Internet TV...

1 Answer

Hi! I have a SONY KV-HR36M31(Australian model). When TV is turned on green light flashes approx.9-10 times and then shuts down.Red light blinks 10 times and then repeats. Whats the problem and can a...


Type in Understanding Sony Blinking Codes in your search bar.
Most Common Problem with these tvs is Bad Picture Tubes, First what happens is you will find Shorted Hori output Transistor,then Bad (FBT) flyback Transfomer, then after you replace these 2 parts you will find out that the Picture is leaking High Voltage and that is what caused Parts to go Bad.

Apr 12, 2011 | Sony Flat Panel Televisions

2 Answers

My TV screen went black and now the bottom light that is usually green, now blinks red 5 times in a row. Can you please tell me what is wrong w/ it?


5 times red standby light blinking shows problem with ballast supply board in Sony KDF-E50A10 model tv, ballast supply board provides high voltage to lamp to produce high bright light.
Please check/ replace ballast supply board in tv by local tv repairman.
Thanks.

Nov 07, 2010 | Sony KDF-E50A10 50 in. LCD HDTV

2 Answers

KDF-50a12U Powers off then standby light blinks 3 times


Please recheck Lamp Cover and make sure it is fixed in its space securely as 3 times red blink shows lamp cover error.
There is small safety switch in TV cabinet under lamp cover that has to be pushed by lamp cover if it is fixed in its position properly. That switch is not being pressed by lamp cover and causing this error.
Thanks.

Oct 19, 2009 | Sony BRAVIA KDL-40V3000 Television

1 Answer

Screen went black no sound no picture when i turn the power on power light comes on green i hear a click and then it goes blinking red


How many times red light blinks? It is error code of problem in TV.
There would be pause of 3 seconds between blinks so count from pause to pause and let me know to find out solution.

Aug 14, 2009 | Sony KDF-E55A20 55 in. LCD Television

1 Answer

TV flashes to black and back again, no remote control operation..


I had the same part replaced in my KDF-42WE655 (3 YEARS OLD) television about 6 months ago and it was covered under an extended warranty by Sony because of a defect found in the part after manufacturing which Sony found will malfunction after time causing multiple issues with the television. My issue was the bottom of the screen started to get a blue dot that was getting progressively bigger. I bought the extended warranty from Best Buy and the problem was fixed no charge but the technician told me that Sony is aware of this issue and they extended the warranty on this part because of it. I would start by calling Sony and letting them know of this issue and see if it's covered under this extended warranty. Hope this helps

Apr 03, 2009 | Sony KDF-42WE655 Television

5 Answers

Red Blinking Light/No Picture


7 blinks? Many have replaced caps on the SMPS board, with success: 2662 is a 1000μF 25v 85°C with 2663 and 2664 both 25v 1 00μF 25v. Another model: http://www.hotelkaveka.com/9944CU.jpg
Some other pics of different caps: http://i121.photobucket.com/albums/o229/garafrax/TV%20Repair/HPIM1458.jpg

Jul 08, 2008 | Philips 42PF9630A 42 in. Plasma Television

3 Answers

Too much green color


Problem solved. I tried playing DVD and the TV picture was fine. So I double-checked cable wires from cable box - one of the wires was loose (obviously it was the red color input). After tightening, the TV picture is good as new.

Mar 20, 2008 | Sony FWD-50PX1 50 in. HD-Ready Plasma...

Not finding what you are looking for?
Sony WEGA KE-42M1 42 in. HD-Ready Plasma Television Logo

Related Topics:

321 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Flat Panel Televisions Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

Paul Bade

Level 3 Expert

1392 Answers

Are you a Sony Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...