Question about Sears Craftsman LiftMaster Chamberlain Garage Door Opener Wireless Keypad Model 976LM Security+

2 Answers

Wireless keypad cannot be reprogrammed....not able to get to "smart button".

Closed the garage door to carriage house and left the remote in the car. I have a wireless keypad which needed new batteries. I cannot get to the "smart button", obviously. How can I reprogram the wireless keypad this way? Same problem remotes inside, do not have previous code to wirelss keypad, garage door is closed so cannot get to smart button, is there anyway to reprogram wirelss keypad.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,422 Answers

Hi,

Please CLICK HERE
Just go through the manual it will help ya..

Goodluck,
Please don't forget to rate the solution

Posted on Apr 29, 2008

  • Priya darshan Apr 29, 2008

    That link will tell you how to reprogam it..

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,267 Answers

Click here to get the instructions on how to make it work.

Posted on Apr 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am renting a house, the owner did not know the code for the remote opener. How do I reset so I can reprogram? It is a craftman mode 139.18795.


If it is a wireless keypad you do this:

Locate the smart/learn button on the rear of the motor unit near where all those white wires go. Press and immediately release this and then walk over to the keypad and key in any 4 digit code you like and press enter.

Sep 12, 2011 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

I HAVE ONE OF THESE GARAGES AND MY HUSBAND GARAGE OPENER WAS STOLEN OUT OF HIS CAR IN FRONT OF THE HOUSE. I NEED TO KNOW WHAT I NEED TO DO IN ORDER TO MAKE SURE THAT REMOTE WILL NEVER WORK AGAIN AND...


Locate the smart/learn button on the rear of the motor unit near where all those white wires go. Press and hold this button for 6 seconds. This will erase the codes and none of the remotes will work. Now you need to program the remotes you have.

Hold down the button on the remote while you press and immediately release the smart/learn button. Do this for each remote you have.

If you have a wireless keypad you need to:

Press and immediately release the smart/learn button and then walk over to the keypad and key in your 4 digit code and press enter.

Sep 22, 2010 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

My husband and I are separated. How can I reprogram my car's remote button (not an actual Sear's control)...so he can no longer use it, that is programed in his car as well. We have a three car garage,...


Locate the smart/learn button on the rear of the motor unit near where all those white wires go. Press and hold this for 6 seconds. This will erase all programming from memory and you will now need to program your remotes and keypad if you have one. Do this for each opener.

To program your remotes hold the button down on the remote while you press and immediately release the smart/learn button. Do this for each remote.

To program your keypad, press and immediately release the smart/learn button and then walk over to your keypad and key in any 4 digit code you like and press enter.

Sep 02, 2010 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Neighbours remotes open my garage door


It is very important to erase the memory of your unit and then reprogram your remotes. Erase the memory by holding the smart/learn button in for 6 seconds. None of your remotes or wireless keypad will work. Now program your remotes this way. Press and hold the button down on your remote and then press and immediately release the smart learn button.

If you have a wireless keypad program it like this. Press and immediately release the smart/learn button and then walk over to your keypad and key in your 4 digit code.

I would make sure your neighbor isn't using his opener when you are programming your keypad.

Oct 30, 2009 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Need to reprogram a single button remote for my Chamberlain garage door opener


Locate the smart/learn button on the rear of the motor unit. Now hold the button down on the remote while you press and immediately release the smart/learn button. Should do it.

Oct 13, 2009 | Sears Craftsman LiftMaster Chamberlain...

2 Answers

Craftsman Garage Door remotes do not work. 139.663953


On the rear of your motor unit near where all those white wires go you will find the smart/learn button. Hold the button down on your remote and press and immediately release the smart/learn button. Do this with all your remotes.

Sep 28, 2009 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Need to reset my garage door opener


You will have to erase the memory which means you will have to reprogram your remotes and keypad if you have one.

To do this locate the smart/learn button on your motor unit just to the left of all those white wires. Press and hold this for about 6 seconds. The only thing that should work is your wall control.

To program your remotes press the button on the remote and then press and immediately release the smart/learn button. Do this for each remote you have.

To program a keypad press and immediately release the smart/learn button, walk to your keypad and key in your 4 digit PIN and press enter.

You should be good to go.

Aug 19, 2009 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

I can get the door opner to porgram? on a chamberlain md 1245r


On the rear of the motor unit just to the left of all those white wires you will find the smart/learn button. Press and hold the button on your remote and then press and immediately release the smart/learn button. Do this for each of your remotes.

Jul 09, 2009 | Sears Craftsman LiftMaster Chamberlain...

Not finding what you are looking for?
Sears Craftsman LiftMaster Chamberlain Garage Door Opener Wireless Keypad Model 976LM Security+ Logo

392 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sears Building Materials Experts

Mike

Level 3 Expert

4332 Answers

Cindy Wells

Level 3 Expert

4805 Answers

Brad Brown

Level 3 Expert

13765 Answers

Are you a Sears Building Material Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...