Question about Epson Aculaser C1100 Printer

2 Answers

Error c0998 hi how do i fix this problem i have tried to do firmware update but it says service req

Posted by on

2 Answers

That what service manual says:

Service Req xyyyy
A Controller error or print engine error detected. Turn off the printer. Wait at least 5 seconds and then turn it back on. If the error message still appears, write down the error number listed on the LCD panel (xyyyy) and turn off the printer, unplug the power cord, and contact a qualified service representative

Posted on May 12, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

That what service manual says:
Service Req xyyyy
A Controller error or print engine error detected. Turn off the printer. Wait at least 5 seconds and then turn it back on. If the error message still appears, write down the error number listed on the LCD panel (xyyyy) and turn off the printer, unplug the power cord, and contact a qualified service representative

Posted on May 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

E02802


Hi, 1) Power off the Printer.
2) Press and hold the INFORMATION + STOP + OK buttons simultaneously, then press the POWER button. Release the buttons when the message "FIRMWARE UPDATE" appears in the display.

If Print Head is replaced without updating firmware, the machine will go into error. In order to bypass this error, CITS (800-423-2366), will ship the L-Printer Service tool CD upon request. This tool will override the error code and allow you to update firmware with the new Print Head.

Regards, polysandy

Apr 19, 2010 | Canon imagePROGRAF W6400 InkJet Printer

1 Answer

Message error E527


What firmware version have you updated to? Check the sensor for the carousel. It could be that the sensor has got a nudged and knocked out of alignment. Remove the PCU and you will see the sensor on the left side above the carousel. Adjust it so it lines up better with the carousel. If it's still bad, check the sensor behind the LV/HV power supply. To do this you will need to remove the two power supply's. If you want a service manual with full details and error code translation get in touch with http://www.TheServiceManualShop.com (cheap as chips!)

Aug 14, 2007 | Epson Aculaser C1100 Printer

1 Answer

Problem for Epson Aculaser C1100 Printer Error E542


Hi
Not much I can say for you I can only tell you what the error is but how to fix it I not know I try to look it up for you but every thing about this printer is in french,

Service Req E542: failure to clean the transfer unit

This all I can find Sorry.
All the best hope you find away to fix it
Pineworks

Feb 06, 2010 | Epson Aculaser C1100 Printer

1 Answer

Epson stylus pro10000 problem service reg


SERVICE REQ. 00020000:NVRAM ERROR
SERVICE REQ. 00020001:NVRAM COMPARISON ERROR
SERVICE REQ. 00020002:SDRAM ERROR
SERVICE REQ. 00020003:FLASH MEMORY ERROR
Problem
Abnormal detection in a corresponding element
Solution
1. Once save parameter to Flash memory card and install it to the printer again.
2. C362DRV board. replacement

Feb 18, 2009 | Epson Stylus Pro 10000 InkJet Printer

2 Answers

Epson Acculaser CX11NF Error 'Service Req E527'


Hi.. To fix the E527 error, close the front panel (cover A) and open the top cover (cover B). With the photoconductor unit removed, the toner carousel will rotate. It only rotates if cover A is closed all the way. You can easily rotate the carousel to a position where you can remove/reinstall the toner cartridge if stuck.

Thanks
jim report_dis_text_13954 = 'We\'re sorry but you must be signed in to report inappropriate material. Click the button below to sign in or register.
  • Sign In / Register »
  • Cancel »
';

Feb 18, 2009 | Epson ACULASER CX11NF All-In-One Printer

1 Answer

I have a service req E527 error on my Epson printer. how to fix?


To fix the E527 error, close the front panel (cover A) and open the top cover (cover B). With the photoconductor unit removed, the toner carousel will rotate. It only rotates if cover A is closed all the way. You can easily rotate the carousel to a position where you can remove/reinstall the stuck toner cartrdige. report_dis_text_13954 = 'We\'re sorry but you must be signed in to report inappropriate material. Click the button below to sign in or register.
  • Sign In / Register »
  • Cancel »
';

Jan 17, 2009 | Epson Aculaser C1100 Printer

1 Answer

HP 2430n Service Error 494C02


Hi atrowbridge:
The error code 494c02 is a firmware issue and needs to be updated. You can go to www.hp.com for the latest firmware updates for your printer.

pdouglasss

Jan 09, 2009 | HP LaserJet 2430n Printer

3 Answers

Hp 4250n, 49.4c06 service error message


Hey guys
same error

start
run
cmd
net stop spooler
goto windows explorer
C:\Windows\System32\spool\PRINTERS
delete all print jobs
back to cmd window
net start spooler
hard power reset printer
error gone all working again

Jul 31, 2008 | Konica Minolta magicolor 2400 Laser...

3 Answers

Call Service F000 error


F000 is a panel communication error... update firmware... firmware as far as i know isnt available to the public... contact kyocera

May 07, 2008 | Kyocera FS-2000D Laser Printer

2 Answers

Copy & send Disabled.


When one press the copy button the firmware corresponding to it works. However, the issue that is stated that the firmware of the printer is corrupted and need to be updated. Please do updated the firmware of your machine by downloading it online from your printer company website.

Feb 06, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
Epson Aculaser C1100 Printer Logo

1,614 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Michel Smith

Level 3 Expert

1218 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...