Question about Troy ExtendNet PocketPro 100 (-2933A) Print Server

1 Answer

My troy bilt 22 hp 50 inch will not start - Troy ExtendNet PocketPro 100 (-2933A) Print Server

Posted by on

1 Answer

Junk!

Posted on Jul 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How i know the IP address assgined to the print server? once this how can I change it?


According to this site http://www.argecy.com/xtnd100s.html it it supports the use of HP's JetAdmin/Web JetAdmin utility which will allow you to configure the IP address as well as other features.

"Features such as full support for HP JetAdmin/Web JetAdmin"


Utility located here:
http://h20338.www2.hp.com/Hpsub/cache/332262-0-0-225-121.html


That same site also has this information about the ExtendView utility which may help you as well.

TROY LAN Administration Tools
  • ExtendView - 32-bit utility allowing most versatility and functionality available in network printing. Ability to view and configure print servers from unlimited number of views and quick and easy Windows IP address assignment are 2 key benefits. Features such as bulk configuration allow configuration changes for multiple print servers with simple steps. Save and restore feature allows a standard configuration to be saved and later recalled to restore same configuration
  • WebView - web based configuration tool allows complete status and configuration changes simply by typing the print server's IP address into a standard web browser
  • NetworkAlert - specialized Windows printer error utility providing proactive notification of printer problems through the use of SNMP traps
  • ExtendNet Connect - serverless (peer-to-peer) printing for Windows 95/98. Excellent tool for small businesses and remote offices
  • ExtendNet Connect NT - performance enhanced port monitor helps to improve the speed of data flow to the printer

Dec 22, 2010 | Troy ExtendNet 100s Print Server

1 Answer

TRENDnet TE100-P11 shows print online but won't print


You have to create an LPR port for it to print successfully.
Download the User's Guide from the following link http://www.trendnet.com/downloads/list_subcategory.asp?SUBTYPE_ID=1316
and then follow the instructions from Page 22 to 24

Jun 24, 2010 | Trendware TRENDnet TE100-P11 Print Server...

3 Answers

I have a Troy 2900a or Extendnet 100x print server. It has three printer ports and I need to be able to configure the other two ports to print on the network. I've logged into the print server and looked...


Hi


Thanks for using FixYa. You’ll need to share the printers. If the printers are different than install all the printer drivers. For detailed description to configure the other two ports to print on the network please follow the step-by-step procedure on the link---

Print on network


Please do accept the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

May 06, 2010 | Troy ExtendNet 100x Print Server

1 Answer

I want to connect the print server ESI9132079.i need drivers for this print server.


hi,

Download and read the manual of this print server.
http://silexamerica.com/us/products/pdf/xtnd/dx-sx.pdf

You only need the actual printer drivers not the print server driver (there is no such thing for print server drivers). Once you connect to network and to Print server, you should be able to see what brand printer is connected to server such as HP, Epson, Fujixerox, Samsung, etc.

Hope this helps

Cheers
Shafie

May 08, 2009 | Troy ExtendNet SX Print Server

2 Answers

Troy Windconnect printserver has stopped working


Due to tolerances in manufacturing, some Bluetooth-adapters/receivers do not stick to the Bluetooth-standards exactly. If this only applies for one adapter/receiver in a pair everything works fine nevertheless. But if both do not stick to the standard, they might not be able to work together, although both would work with a standard-conform third one.

Before your mainboard was replaced, only your printserver was not exactly standard-conform. Now with a new mainboard (and therfore a new Bluetooth-adapter on it) just by accident your Bluetooth-adapter does not confirm to the standard, too.

If all this is right in your case, the solution would be to buy a Bluetooth-usb-dongle for your notebook and use this instead of the built-in Bluetooth-adapter of your notebook. If this new Bluetooth-usb-dongle confirms to the Bluetooth-standards better than your built-in adapter, this might cure the problem. Since such a Bluetooth-usb-dongle only costs about 10 Dollars, it might be worth a try.

Greetings, Michael

Feb 23, 2009 | Troy WindConnect With WindPort PC Card...

1 Answer

ExtendNet Pocket Printer ESI-2841 - Link Light fails to come on.


Did you connect it hrough a swirch with a network cable, or to a pc with a crossover? It is not a smart adapter, can't do midi or tx.

Oct 31, 2007 | Troy ExtendNet SX Print Server

Not finding what you are looking for?
Troy ExtendNet PocketPro 100 (-2933A) Print Server Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Troy Print Servers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

old marine
old marine

Level 3 Expert

1460 Answers

Cindy Wells

Level 3 Expert

4753 Answers

Are you a Troy Print Server Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...