- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You can try to Repair your Windows using the Windows installation CD (for Repair choose R when prompted). You can let the automatic repair to try and fix it, if that doesn't work upon restart reboot and start the Repair again, but this time select Command Prompt or Console and put in "bootrec /rebuildbcd" without the quotes. If you don't have Windows installation CD you can try downloading Hiren's Boot CD and try to fix the bootmgr with the utilities from the disc: http://www.hirensbootcd.org/download/
always preferable to use windows nt or above (i prefer win xp pro sp2).. guess u r using such as u r working in some local language pack & or ur pc is back-dated.. immediately hv installed with some licensed n UPDATED antivirus (dat supports win98se)[i prefer avg/kaspersky].. remove unnecessary items from boot..download n install 'Startup Control Panel'..in here uncheck unimportant startup items.. http://download.cnet.com/Startup-Control-Panel/3000-2094_4-10039330.html for detailed assistance contact ur system admin/vendor....
How to Install Windows 98
Insert the Windows 98 Startup disk in the floppy disk drive, and then restart your computer.
When the Windows 98 Startup menu is displayed, choose the Start computer with CD-ROM support option, and then press ENTER.
If CD-ROM support is provided by the generic drivers on the Startup disk, you receive one of the following messages, where X is the drive letter that is assigned to your CD-ROM drive:
Drive X: = Driver MSCD001
Drive X: = Driver OEMCD001
NOTE: If your CD-ROM drive is not available after you boot
from the Windows 98 Startup disk, install the CD-ROM drivers that are
included with your CD-ROM drive. For information about how to obtain
and install the most current driver for your CD-ROM drive, view the
documentation that is included with your device, or contact your
Insert the Windows 98 CD-ROM in the CD-ROM drive, type the following command at a command prompt, and then press ENTER
where X is the drive letter that is assigned to your CD-ROM drive.
you receive the following message, press ENTER, and then follow the
instructions on the screen to complete the Setup procedure:
Please wait while the Setup initializes. Setup is now going to perform a routine check on your system. To continue press Enter.
if you know the installation of winxp and win98 then it is possible to create a system with mercury board with 98 and xp.
firstly you install win xp in your computer. it's automatically located in c drive. then you intall win 98 custom install and then choose the installation directory of another drive like d. you use any boot manager to boot the pc with win98 and winxp. i don't tell you the installation process step by step. so don't mind.
as far as the secound question the CS630 is the Create and Share webcam from intel which would mean if its the 2.0 ver then the link below here is the drivers you need as above select your os and then download the drivers