Can't get wireless connection. I had it before. misplaced dirctions.

Did you replace the batteries in the keyboard? Usually wireless keyboards or mice are powered by AA or AAA batteries. I would replace first to see if that is your problem

Try replacing ALL directionals for the side that is not working properly. That fast blink in the back usually means bad bulb, but could also mean bad relay.

Can you elaborate? You say emergency flashers work, but FR directional does not. Does the bulb-in-question light when the E-flashers are going?

Hi

is your laptop not finding the router at all
or is it finding it but not connecting to it
have you enabled the wireless switch on your laptop
i believe the wireless switch is down on the bottom left of the laptop
and it has to be slid over to the right to enable it

here is a link which has a user guide also a ytube video on how to set it up


http://homesupport.cisco.com/en-us/wireless/linksys/E1000

please let us know the outcome
so that we may be able to help others
many thanks

WIRELESS SECURITY ISSUES


Uninstall the Belkin Setup and Router manager from your computer




Step 1 : Connect Router - Computer ( Wired)

Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3 : On the left under wireless click wi - fi protected setup

Step 4 : Leave the password blank and click on submit

Step 5 : Disable it and Click on apply changes

Step 6 : On the left under wireless click Security

Step 7 : Enable 64 Bit WEP

Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )

Step 9 : Click apply changes

Step 10 : on the left under wireless click channel and SSID

Step 11 :Change the Wireless channel to 6

Step 12 : Change the SSID to a different name ( no Spaces )

Step 13 : Click apply changes

Step 14 : Now Scan and connect to this network ( Wireless )

Let me know if it works

If your router is already set up and you want to add a new computer, you don't need to run the set up CD for the router again.
If you want to add a new wireless device ( laptop or any other wireless device) to the network, then you should know all the wireless settings of the router. What wireless settings do you need to know ?
You should know the wireless network name ( SSID ), wireless channel and the wireless security password
( network key ). Once you get all the wireless settings of the router , you will need to connect to the wireless network on the computer. when you try to connect to the network , you will see your wireless network in the list. You just need to select your network and connect to it. If it is secured then you will need to enter the network key and you will be able to go online.
To check the wireless settings of the router , you will need to access the router set up page. On the set up page you will find all the wireless settings of the router.
Click Here for more info

Hi,

you don't need special dirvers for your kodak wireless adapter. Please go ahead assign to the wireless instructions in the manual. Look here. You only need the easyshare software to connect your printer via bluetooth to your pc. You can download it for free from the kodak website.

sign into your router and go to the section on wireless security. the key will be in there. linksys is usually 192.168.1.1 which you would type into your browser to access the router settings.

log in to the setup page @ 192.168.0.1 and go to the wireless security page. There you will see the key.

Don't worry the router does not have a driver. Just run the network wizard in windows. And set up a new connection you will see.

Most of the software you don't actually need for basic connections. You can usually connect to the router by going to the loop back address of the router.

But if you need the software, it is available at linksys.com