Webcam software i bought a philips pc camera model si4750/27 from the local flee market it didnt have any software where should i go to get this thing up and running

Hi,
You need to reset the BIOS then Please get it reset at dealer or local shop.
Regards

Philips PC Camera SIC4750 is only compatible with OS Windows 98 Second Edition, Windows 2000 & Win XP. (Only 32Bit system ie x86)

FAQ from Philips (Ref. Link)
Question: Can I use my webcam with Windows 7 or Vista ?
Answer:- At the time this webcam was designed, Windows Vista and Windows 7 operating systems did not exist yet. Unfortunately, the internal hardware of the webcam does not match the requirements of these operating systems. Therefore we cannot provide a software upgrade (driver upgrade) to support Windows Vista or Windows 7. We apologize that we are not able to support you in this matter.

Too bad Philip do not provide the drivers if your are Using Vista or Win 7 or any x64Bit system.

I could help you, but I am not sure that you are the legal owner. Sorry, but if you had a way to prove ownership, I would be delighted to assist you.

http://www.downloadatoz.com/driver/item_philips-webcam-spc900nc-37-driver-r5b-windows-xp-english.html
try this one ...I sow that its almost the same ...maybe you didnt write the lot no right ...its a spc 900 NC ....but its has a 27 in the tail...Good luck !

i want drive webcam philips-spc315nc

hi friend

here is link

http://members.driverguide.com/index.php?action=dosearch&qm0=cs330+&qa5=14&dp=3&sm=h&jmd=and

hi jenn..

you can find the drivers for Philips products by going to this link:

Philips Contact & Support
(many manufacturers list software and drivers in their support section)

choose your country & language. on the next page, type in the model of your product then click on the model for the country where you bought the product (if you are given a choice).

once you get to the page with information about your product, click on the 'Software and drivers' link in the left hand menu.

be sure you pick the right driver for your country, language and operating system.

i hope that helps! let me know if you have any questions.
bru*

Hi

You did not provide spec details regarding the Philips Webcam. Have a look at

http://www.support.philips.com/support/html/index_us_en.html#../~scripts/xsltransformsearch.asp?url=http://www.sms.philips.com/catalogue/list?sid=SMS||type=CONSUMER||locale=us_en||mode=prods||item=WEBCAMS_SU||page=1||show=75&xsl=search_result.xsl

Check the model details of your webcam and download the correct drivers.

Regards
Mike

you should be able to find your webcam software here
http://www.support.philips.com/support/html/index_us_en.html#../~scripts/xsltransformsearch.asp?url=http://www.sms.philips.com/catalogue/list?sid=SMS||type=CONSUMER||locale=us_en||mode=prod_text||item=web%20cams||page=1||show=108&xsl=search_result.xsl

If you tried the video test in the software you were supplied with the camera, try doing the same thing in windows movie maker2, this way if the same thing happens you know there is a problem with the cam driver streaming the audio and video not the software for recording. If it is still out of sync; as i have had on many occasions with my logitech, sometimes restarting the camera helps, because normally the camera programme starts up as soon as you boot up the pc ready for your cam to be connected. To do this there is normally an icon on right side of taskbar, right click on it and select close, and disconnect cam. Reconnect cam and the software should restart. You can also try using a different usb port as that sometiimes cures the delay.